CODES

ADOPTS WITH AMENDMENTS:

International Plumbing Code 2012 (IPC 2012)

This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.8.

ANSI

American National Standards Institute
25 West 43rd Street, Fourth Floor
New York NY 10036
Standard
reference
number
TitleReferenced
in code
section number

A118.10—99

Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation

417.5.2.5417.5.2.6

Z4.3—95

Minimum Requirements for Nonsewered Waste-disposal Systems

311.1

Z21.22—99 (R2003)

Relief Valves for Hot Water Supply Systems with Addenda Z21.22a—2000 (R2003) and Z21.22b—2001 (R2003)

504.2504.4504.4.1

Z124.1.2—2005

Plastic Bathtub and Shower Units

407.1417.1

Z124.3—95

Plastic Lavatories

416.1416.2417.1

Z124.4—96

Plastic Water Closet Bowls and Tanks

420.1

Z124.6—97

Plastic Sinks

415.1418.1

Z124.9—94

Plastic Urinal Fixtures

419.1

AHRI

Air-Conditioning, Heating, & Refrigeration Institute
4100 North Fairfax Drive, Suite 200
Arlington VA 22203
Standard
reference
number
TitleReferenced
in code
section number

1010—02

Self-contained, Mechanically Refrigerated Drinking-Water Coolers

410.1

ASME

American Society of Mechanical Engineers
Three Park Avenue
New York NY 10016-5990
Standard
reference
number
TitleReferenced
in code
section number

A112.1.2—2004

Air Gaps in Plumbing Systems

Table 608.1608.13.1

A112.1.3—2000(Reaffirmed 2005)

Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances

Table 608.1608.13.11102.6

A112.3.1—2007

Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground

412.1Table 702.1Table 702.2Table 702.3Table 702.4708.2Table 1102.4Table 1102.5Table 1102.7

A112.3.4—2000 (Reaffirmed 2004)

Macerating Toilet Systems and Related Components

712.4.1

A112.4.1—1993 (R2002)

Water Heater Relief Valve Drain Tubes

504.6

A112.4.2—2003(R2008)

Water Closet Personal Hygiene Devices

424.9

A112.4.3—1999 (Reaffirmed 2004)

Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System

405.4

A112.6.1M—1997 (R2002)

Floor-affixed Supports for Off-the-floor Plumbing Fixtures for Public Use

405.4.3

A112.6.2—2000 (Reaffirmed 2004)

Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks

405.4.3

A112.6.3—2001(Reaffirmed 2007)

Floor and Trench Drains

412.1

A112.6.4—2003 (R2008)

Roof, Deck, and Balcony Drains

1102.6

A112.6.7—2001 (Reaffirmed 2007)

Enameled and Epoxy-coated Cast-iron and PVC Plastic Sanitary Floor Sinks

427.1

A112.6.9—05

Siphonic Roof Drains

1107.1

A112.14.1—2003

Backwater Valves

715.2

A112.14.3—2000

Grease Interceptors

1003.3.4

A112.14.4—2001 (Reaffirmed 2007)

Grease Removal Devices

1003.3.4

A112.18.1—2005/CSA B125.1—2005

Plumbing Supply Fittings

424.1424.2424.3424.4424.6607.4608.2

A112.18.2—2005/CSA B125.1—2010

Plumbing Waste Fittings with 2007 and 2008 Supplements

424.1.2

A112.18.3—2002 (Reaffirmed 2008)

Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings

424.2424.6

A112.18.6/CSA B125.6—2009

Flexible Water Connectors

605.6

A112.18.7—1999 (Reaffirmed 2004)

Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection

424.8

A112.19.1M/CSA B45.2—2008

Enameled Cast Iron and Enameled Steel Plumbing Fixtures

407.1410.1415.1416.1418.1

A112.19.2—2008/CSA B45.1—08

Ceramic Plumbing Fixtures

401.2405.9407.1408.1410.1415.1416.1417.1418.1419.1420.1

A112.19.3M—2008/CSA B45.4—08

Stainless Steel Plumbing Fixtures

405.9407.1415.1416.1418.1420.1

A112.19.5/CSA B45.15—2009

Trim for Water-closet Bowls, Tanks and Urinals

425.4

A112.19.7M/CSA B45.10—2009

Hydromassage Bathtub Appliances

421.1421.4

A112.19.12—2006

Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems

416.4418.3

A112.19.15—2005

Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors

407.4421.6

A112.19.19—2006

Vitreous China Nonwater Urinals

419.1

A112.36.2M—1991(R2008)

Cleanouts

708.2

B1.20.1—1983(R2006)

Pipe Threads, General Purpose (inch)

605.10.3605.12.3605.14.4605.16.3605.18.1605.22.3705.2.3705.4.3705.9.4705.12.1705.14.3

B 16.3—2006

Malleable Iron Threaded Fittings Classes 150 and 300

Table 605.5Table 702.4Table 1102.7

B 16.4—2006

Gray Iron Threaded Fittings Classes 125 and 250

Table 605.5Table 702.4Table 1102.7

B 16.9—2007

Factory-made Wrought Steel Buttwelding Fittings

Table 605.5Table 702.4Table 1102.7

B 16.11—2005

Forged Fittings, Socket-welding and Threaded

Table 605.5Table 702.4Table 1102.7

B16.12—1998 (Reaffirmed 2006)

Cast-iron Threaded Drainage Fittings

Table 605.5Table 702.4Table 1102.7

B16.15—2006

Cast Bronze Threaded Fittings

Table 605.5Table 702.4Table 1102.7

B 16.18—2001 (Reaffirmed 2005)

Cast Copper Alloy Solder Joint Pressure Fittings

Table 605.5Table 702.4Table 1102.7

B16.22—2001 (Reaffirmed 2005)

Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

Table 605.5Table 702.4Table 1102.7

B16.23—2002 (Reaffirmed 2006)

Cast Copper Alloy Solder Joint Drainage Fittings DWV

Table 605.5Table 702.4Table 1102.7

B 16.26—2006

Cast Copper Alloy Fittings for Flared Copper Tubes

Table 605.5Table 702.4Table 1102.7

B 16.28—1994

Wrought Steel Buttwelding Short Radius Elbows and Returns

Table 605.5Table 702.4Table 1102.7

B 16.29—2007

Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV)

Table 605.5Table 702.4Table 1102.7

ASPE

American Society of Plumbing Engineers
8614 Catalpa Avenue, Suite 1007
Chicago IL 60656-1116
Standard
reference
number
TitleReferenced
in code
section number

45—2007

Siphonic Roof Drainage Systems

1107.1

ASSE

American Society of Sanitary Engineering
901 Canterbury Road, Suite A
Westlake OH 44145
Standard
reference
number
TitleReferenced
in code
section number

1001—08

Performance Requirements for Atmospheric Type Vacuum Breakers

425.2Table 608.1608.13.6608.16.4.1

1002—08

Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks

425.3.1Table 608.1

1003—09

Performance Requirements for Water Pressure Reducing Valves

604.8

1004—08

Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines

409.1

1005—99

Performance Requirements for Water Heater Drain Valves

501.3

1008—06

Performance Requirements for Plumbing Aspects of Food Waste Disposer Units

413.1

1010—04

Performance Requirements for Water Hammer Arresters

604.9

1011—04

Performance Requirements for Hose Connection Vacuum Breakers

Table 608.1608.13.6

1012—09

Performance Requirements for Backflow Preventers with Intermediate Atmospheric Vent

Table 608.1608.13.3608.16.2

1013—09

Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers

Table 608.1608.13.2608.16.2

1015—09

Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies

Table 608.1608.13.7

1016—2010

Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings

424.3424.4607.4

1017—2010

Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems

501.2613.1

1018—2010

Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied

1002.4

1019—2010

Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type

Table 608.1608.13.6

1020—04

Performance Requirements for Pressure Vacuum Breaker Assembly

Table 608.1608.13.5

1022—03

Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment

Table 608.1608.16.1608.16.10

1024—04

Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets)

605.3.1Table 608.1

1035—08

Performance Requirements for Laboratory Faucet Backflow Preventers

Table 608.1608.13.6

1037—90

Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures

425.2

1044—2010

Performance Requirements for Trap Seal Primer Devices Drainage Types and Electronic Design Types

1002.4

1047—2009

Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies

Table 608.1608.13.2

1048—2009

Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies

Table 608.1608.13.7

1049—2009

Performance Requirements for Individual and Branch Type Air Admittance Valves for Chemical Waste Systems

901.3918.8

1050—2009

Performance Requirements for Stack Air Admittance Valves for Sanitary Drainage Systems

918.1

1051—2009

Performance Requirements for Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems-fixture and Branch Devices

917.1

1052—04

Performance Requirements for Hose Connection Backflow Preventers

Table 608.1608.13.6

1055—2009

Performance Requirements for Chemical Dispensing Systems

608.13.9

1056—2010

Performance Requirements for Spill Resistant Vacuum Breaker

Table 608.1608.13.5608.13.8

1060—2006

Performance Requirements for Outdoor Enclosures for Fluid Conveying Components

608.14.1

1061—2010

Performance Requirements for Removable and Nonremovable Push Fit Fittings

Table 605.5

1062—2006

Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings

424.7

1066—97

Performance Requirements for Individual Pressure Balancing In-line Valves for Individual Fixture Fittings

604.11

1069—05

Performance Requirements for Automatic Temperature Control Mixing Valves

424.4

1070—04

Performance Requirements for Water-temperature Limiting Devices

408.3416.5424.5607.1.2

1079—2005

Performance Requirements for Dielectric Pipe Unions

605.24.1605.24.3

5013—2009

Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP)

312.10.2

5015—2009

Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF)

312.10.2

5020—2009

Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA)

312.10.2

5047—98

Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA)

312.10.2

5048—2009

Performance Requirements for Testing Double Check Valve Detector Assembly (DCDA)

312.10.2

5052—98

Performance Requirements for Testing Hose Connection Backflow Preventers

312.10.2

5056—98

Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB)

312.10.2

ASTM

ASTM International
100 Barr Harbor Drive
West Conshohocken PA 19428-2959
Standard
reference
number
TitleReferenced
in code
section number

A 53/A 53M—07

Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless

Table 605.3Table 605.4Table 702.1

A 312/A 312M—08a

Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes

Table 605.3Table 605.4Table 605.5605.23.2

A 733—03

Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

Table 605.8

A 778—01

Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products

Table 605.3Table 605.4Table 605.5

A 888—09

Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application

Table 702.1Table 702.2Table 702.3Table 702.4708.7Table 1102.4Table 1102.5Table 1102.7

B 32—08

Specification for Solder Metal

605.14.3605.15.4705.9.3705.10.3

B 42—02e01

Specification for Seamless Copper Pipe, Standard Sizes

Table 605.3Table 605.4Table 702.1

B 43—98(2004)

Specification for Seamless Red Brass Pipe, Standard Sizes

Table 605.3Table 605.4Table 702.1

B 75—02

Specification for Seamless Copper Tube

Table 605.3Table 605.4Table 702.1Table 702.2Table 702.3Table 1102.4

B 88—03

Specification for Seamless Copper Water Tube

Table 605.3Table 605.4Table 702.1Table 702.2Table 702.3Table 1102.4

B 152/B 152M—06a

Specification for Copper Sheet, Strip Plate and Rolled Bar

402.3417.5.2.4425.3.3902.2

B 251—02e01

Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube

Table 605.3Table 605.4Table 702.1Table 702.2Table 702.3Table 1102.4

B 302—07

Specification for Threadless Copper Pipe, Standard Sizes

Table 605.3Table 605.4Table 702.1

B 306—09

Specification for Copper Drainage Tube (DWV)

Table 702.1Table 702.2Table 1102.4

B 447—07

Specification for Welded Copper Tube

Table 605.3Table 605.4

B 687—99(2005)e01

Specification for Brass, Copper and Chromium-plated Pipe Nipples

Table 605.8

B 813—00(2009)

Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

605.14.3605.15.4705.9.3705.10.3

B 828—02

Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

605.14.3605.15.4705.9.3705.10.3

C 4—04e01

Specification for Clay Drain Tile and Perforated Clay Drain Tile

Table 702.3Table 1102.4Table 1102.5

C 14—07

Specification for Nonreinforced Concrete Sewer, Storm Drain and Culvert Pipe

Table 702.3Table 1102.4

C 76—08a

Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe

Table 702.3Table 1102.4

C 296—00(2004)

Specification for Asbestos-cement Pressure Pipe

Table 605.3

C 425—04

Specification for Compression Joints for Vitrified Clay Pipe and Fittings

705.15705.19

C 428—05(2006)

Specification for Asbestos-cement Nonpressure Sewer Pipe

Table 702.2Table 702.3Table 702.4Table 1102.4

C 443—05a

Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

705.6705.19

C 508—00(2004)

Specification for Asbestos-cement Underdrain Pipe

Table 1102.5

C 564—08

Specification for Rubber Gaskets for Cast-iron Soil Pipe and Fittings

705.5.2705.5.3705.19

C 700—07a

Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

Table 702.3Table 702.4Table 1102.4Table 1102.5

C 1053—00(2005)

Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

Table 702.1Table 702.4

C 1173—08

Specification for Flexible Transition Couplings for Underground Piping System

705.2.1705.6705.7.1705.14.1705.15705.16.2705.19

C 1277—08

Specification for Shielded Coupling Joining Hubless Cast-iron Soil Pipe and Fittings

705.5.3

C 1440—08

Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

705.19

C 1460—08

Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground

705.19

C 1461—08

Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use

705.19

C 1540—08

Specification for Heavy Duty Shielded Couplings Joining Hubless Cast-iron Soil Pipe and Fittings

705.5.3

C 1563—08

Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications

705.5.2

D 1527—99(2005)

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

Table 605.3

D 1785—06

Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120

Table 605.3

D 1869—95(2005)e1

Specification for Rubber Rings for Asbestos-cement Pipe

605.11605.24705.3705.19

D 2235—04

Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

605.10.2705.2.2705.2.2705.7.2

D 2239—03

Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

Table 605.3

D 2241—05

Specification for Poly (Vinyl Chloride) (PVC) Pressure-rated Pipe (SDR-Series)

Table 605.3

D 2282—99e01(2005)

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)

Table 605.3

D 2464—06

Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

Table 605.5

D 2466—06

Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

Table 605.5

D 2467—06

Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

Table 605.5

D 2468—96a

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40

Table 605.5

D 2564—04e01

Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems

605.22.2705.8.2705.14.2

D 2609—02(2008)

Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

Table 605.5

D 2657—07

Practice for Heat Fusion-joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings

605.19.2705.16.1

D 2661—08

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

Table 702.1Table 702.2Table 702.3Table 702.4705.2.2705.7.2Table 1102.4Table 1102.7

D 2665—09

Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

Table 702.1Table 702.2Table 702.3Table 702.4Table 1102.4Table 1102.7

D 2672—96a(2003)

Specification for Joints for IPS PVC Pipe Using Solvent Cement

Table 605.3

D 2683—04

Standard Specification for Socket-type Polyethylene fittings for Outside Diameter-controlled Polyethylene Pipe and Tubing

Table 605.5

D 2729—03

Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings

Table 1102.5Table 1303.10

D 2737—03

Specification for Polyethylene (PE) Plastic Tubing

Table 605.3

D 2751—05

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

Table 702.3Table 702.4Table 1102.4Table 1102.7

D 2846/D 2846M—09

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems

Table 605.3Table 605.4Table 605.5605.16.2

D 2855—96(2002)

Standard Practice for Making Solvent-cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings

605.22.2705.8.2705.14.2

D 2949—01a(2008)

Specification for 3.25-in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

Table 702.1Table 702.2Table 702.3Table 702.4Table 1102.7

D 3034—08

Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings

Table 702.3Table 702.4Table 1102.4Table 1102.7

D 3035—08

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

Table 605.3

D 3139—98(2005)

Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

605.10.1605.22.1

D 3212—07

Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

705.2.1705.7.1705.8.1705.14.1705.16.2

D 3261—03

Specification for Butt Heat Fusion Polyethylene (PE) Plastic fittings for Polyethylene (PE) Plastic Pipe and Tubing

Table 605.5

D 3311—08

Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns

Table 1102.7

D 4068—01

Specification for Chlorinated Polyethlene (CPE) Sheeting for Concealed Water-containment Membrane

417.5.2.2

D 4551—96(2008) e1

Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-containment Membrane

417.5.2.1

F 405—05

Specification for Corrugated Polyethylene (PE) Pipe and Fittings

Table 1102.5Table 1303.10

F 409—02 (2008)

Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

424.1.2Table 1102.7

F 437—06

Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

Table 605.5

F 438—04

Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

Table 605.5

F 439—06

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

Table 605.5

F 441/F 441M—02 (2008)

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

Table 605.3Table 605.4

F 442/F 442M—99(2005) e1

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)

Table 605.3Table 605.4

F 477—08

Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

605.24,705.19

F 493—04

Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

605.16.2

F 628—08

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core

Table 702.1Table 702.2Table 702.3Table 702.4705.2.2705.7.2Table 1102.4Table 1102.7

F 656—08

Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings

605.22.2705.8.2705.14.2

F 714—08

Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter

Table 702.3

F 876—08b

Specification for Cross-linked Polyethylene (PEX) Tubing

Table 605.3Table 605.4

F 877—07

Specification for Cross-linked Polyethylene (PEX) Plastic Hot and Cold Water Distribution Systems

Table 605.3Table 605.4Table 605.5

F 891—07

Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core

Table 702.1Table 702.2Table 702.3Table 1102.4Table 1102.5Table 1102.7

F 1055—98(2006)

Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing

Table 605.5

F 1281—07

Specification for Cross-linked Polyethylene/Aluminum/ Cross-linked Polyethylene (PEX-AL-PEX) Pressure Pipe

Table 605.3Table 605.4Table 605.5605.21.1

F 1282—06

Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

Table 605.3Table 605.4Table 605.5605.21.1

F 1412—09

Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage

Table 702.1Table 702.2Table 702.4705.17.1

F 1488—03

Specification for Coextruded Composite Pipe

Table 702.1Table 702.2Table 702.3Table 1303.10

F 1673—04

Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

Table 702.1Table 702.2Table 702.3Table 702.4705.18.1

F 1807—08

Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing

Table 605.5

F 1866—07

Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

Table 702.4Table 1102.7

F 1960—09

Specification for Cold Expansion Fittings with PEX Reinforcing Rings for use with Cross-linked Polyethylene (PEX) Tubing

Table 605.5

F 1974—08

Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Composite Pressure Pipe

Table 605.5605.21.1

F 1986—01(2006)

Specification for Multilayer Pipe, Type 2, Compression Fittings and Compression Joints for Hot and Cold Drinking Water Systems

Table 605.3Table 605.4Table 605.5

F 2080—08

Specifications for Cold-expansion Fittings with Metal Compression-sleeves for Cross-linked Polyethylene (PEX) Pipe

Table 605.5

F 2098—08

Standard specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings

Table 605.5

F 2159—05

Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing

Table 605.5

F 2262—05

Specification for Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Tubing OD Controlled SDR9

Table 605.3Table 605.4

F 2306/F 2306M—08

12'' to 60'' Annular Corrugated Profile-wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications

Table 1102.4Table 1102.7

F 2389—07e1

Specification for Pressure-rated Polypropylene (PP) Piping Systems

Table 605.3Table 605.4Table 605.5605 .20.1

F 2434—08

Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/ Cross-linked Polyethylene (PEX AL-PEX) Tubing

Table 605.5

F 2735—09

Standard Specification for SDR9 Cross-linked Polyethylene (PEX) and Raised Temperature (PE-RT) Tubing

Table 605.5

F 2769—09

Polyethylene or Raised Temperature (PE-RT) Plastic Hot and Cold Water Tubing and Distribution Systems

Table 605.3Table 605.4

AWS

American Welding Society
550 N.W. LeJeune Road
Miami FL 33126
Standard
reference
number
TitleReferenced
in code
section number

A5.8—04

Specifications for Filler Metals for Brazing and Braze Welding

605.12.1605.14.1605.15.1705.4.1705.9.1705.10.1

AWWA

American Water Works Association
6666 West Quincy Avenue
Denver CO 80235
Standard
reference
number
TitleReferenced
in code
section number

C104—98

Standard for Cement-mortar Lining for Ductile-iron Pipe and Fittings for Water

605.3605.5

C110/A21.10—03

Standard for Ductile-iron and Gray-iron Fittings, 3 Inches through 48 Inches, for Water

Table 605.5Table 702.4Table 1102.7

C111—00

Standard for Rubber-gasket Joints for Ductile-iron Pressure Pipe and Fittings

605.13

C115/A21.15—99

Standard for Flanged Ductile-iron Pipe with Ductile-iron or Gray-iron Threaded Flanges

Table 605.3Table 605.4

C151/A21.51—02

Standard for Ductile-iron Pipe, Centrifugally Cast for Water

Table 605.3Table 605.4

C153—00/A21.53—00

Standard for Ductile-iron Compact Fittings for Water Service

Table 605.5

C510—00

Double Check Valve Backflow Prevention Assembly

Table 608.1608.13.7

C511—00

Reduced-pressure Principle Backflow Prevention Assembly

Table 608.1608.13.2608.16.2

C651—99

Disinfecting Water Mains

610.1

C652—02

Disinfection of Water-storage Facilities

610.1

C901—08

Polyethylene (PE) Pressure Pipe and Tubing 1/2inch (13 mm) Through 3 inch (76 mm) for Water Service

Table 605.3

C904—08

Cross-linked Polyethylene (PEX) Pressure Pipe 1/2inch (13 mm) Through 3 inch (76 mm) for Water Service

Table 605.3

CISPI

Cast Iron Soil Pipe Institute
5959 Shallowford Road, Suite 419
Chattanooga TN 37421
Standard
reference
number
TitleReferenced
in code
section number

301—04a

Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications

Table 702.1Table 702.2Table 702.3Table 702.4708.7Table 1102.4Table 1102.5Table 1102.7

310—04

Specification for Coupling for Use in Connection with Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications

705.5.3

CSA

Canadian Standards Association
5060 Spectrum Way
Mississauga Ontario, Canada L4W 5N6
Standard
reference
number
TitleReferenced
in code
section number

A257.1M—92

Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings

Table 702.3Table 1102.4

A257.2M—92

Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings

Table 702.3Table 1102.4

A257.3M—92

Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets

705.6705.19

ASME A112.18.1/ CSA B125.1—05

Plumbing Supply Fittings

424.1424.2424.3424.4424.6607.4608.2

ASME A112.18.2/CSA B125.2—05

Plumbing Waste Fittings

424.1.2

ASME A112.9.2/B45.1—08

Ceramic Plumbing Fixtures

401.2405.9407.1408.1410.1415.1416.1417.1418.1419.1420.1

ASME A112.19.1/CSA B45.2—08

Enameled Cast-iron and Enameled Steel Plumbing Fixtures

407.1410.1415.1416.1418.1

ASME A112.19.3/CSA B45.4—08

Stainless-steel Plumbing Fixtures

405.9407.1415.1416.1418.1420.1

ASME A112.19.5/CSA B45.15—09

Trim for Water Closet Bowls and Tanks

425.4

ASME A112.19.7/CSA B45.10—09

Hydromassage Bathtub Appliances

421.1421.4

B45.5—02(R2008)

Plastic Plumbing Fixtures

407.1416.2417.1419.1420.1

B45.9—99(R2008)

Macerating Systems and Related Components

712.4.1

B64.1.1—01

Vacuum Breakers, Atmospheric Type (AVB)

425.2Table 608.1608.13.6608.16.4.1

B64.1.2—07

Pressure Vacuum Breakers, (PVB)

Table 608.1608.13.5

B64.1.3—07

Spill Resistant Pressure Vacuum Breaks (SRPVB)

608.13.8

B64.2—01

Vacuum Breakers, Hose Connection Type (HCVB)

Table 608.1608.13.6

B64.2.1—07

Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature

Table 608.1608.13.6

B64.2.1.1—07

Hose Connection Dual Check Vacuum Breakers, (HCDVB)

Table 608.1608.13.6

B64.2.2—01

Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature

Table 608.1608.13.6

B64.3—01

Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP)

Table 608.1608.13.3608.16.2

B64.4—01

Backflow Preventers, Reduced Pressure Principle Type (RP)

Table 608.1608.13.2608.16.2

B64.4.1—07

Reduced Pressure Principle for Fire Sprinklers (RPF)

Table 608.1608.13.2

B64.5—07

Double Check Backflow Preventers (DCVA)

Table 608.1608.13.7

B64.5.1—07

Double Check Valve Backflow Preventer for Fire Systems (DCVAF)

Table 608.1608.13.7

B64.6—07

Dual Check Backflow PreventersValve (DuC)

605.3.1Table 608.1

B64.7—07

Laboratory Faucet Vacuum Breakers (LFVB)

Table 608.1608.13.6

B64.10—07

Selection and Installation of Backflow Preventers

312.10.2

B64.10.1—07

Maintenance and Field Testing of Backflow Preventers

312.10.2

B79—08

Commercial and Residential Drains, and Cleanouts

412.1

B125.3—2005

Plumbing Fittings

408.3416.5424.4424.5425.2425.3.1Table 608.1

B137.1—05

Polyethylene (PE) Pipe, Tubing and Fittings for Cold Water Pressure Services

Table 605.3Table 605.5

B137.2—05

Polyvinylchloride PVC Injection-moulded Gasketed Fittings for Pressure Applications

Table 605.5

B137.3—05

Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications

Table 605.3Table 605.4Table 605.5605.22.2705.8.2705.14.2

B137.5—05

Cross-linked Polyethylene (PEX) Tubing Systems for Pressure Applications

Table 605.3Table 605.4Table 605.5

B137.6—05

CPVC Pipe, Tubing and Fittings for Hot and Cold Water Distribution Systems

Table 605.3Table 605.4

B137.9—02

Polyethylene/Aluminum/Polyethylene Composite Pressure Pipe Systems

Table 605.3Table 605.5605.21.1

B137.10M—02

Cross-linked Polyethylene/Aluminum/Polyethylene Composite Pressure Pipe Systems

Table 605.3Table 605.4Table 605.5605.21.1

B137.11—05

Polypropylene (PP-R) Pipe and Fittings for Pressure Applications

Table 605.3Table 605.4Table 605.5

B181.1—06

Acrylonitrile-butadiene-styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings

Table 702.1Table 702.2Table 702.3Table 702.4705.2.2705.7.2715.2Table 1102.4Table 1102.7

B 181.2—06

Polyvinylchloride PVC and chlorinated polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings

Table 702.1Table 702.2705.8.2705.14.2715.2

B181.3—02

Polyolefin Laboratory Drainage Systems

Table 702.1Table 702.2Table 702.3Table 702.4705.17.1

B182.1—06

Plastic Drain and Sewer Pipe and Pipe Fittings

705.8.2705.14.2Table 1102.4

B182.2—06

PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings

Table 702.3Table 1102.4Table 1102.5

B182.4—02

Profile PVC Sewer Pipe and Fittings

Table 702.3Table 1102.4Table 1102.5

B182.4—06

Profile Polyvinylchloride PVC Sewer Pipe and Fittings

Table 702.3Table 1102.4Table 1102.5

B182.6—06

Profile Polyethylene Sewer Pipe and

Table 1102.5

B182.8—06

Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings

Table 1102.5

B356—00(2005)

Water Pressure Reducing Valves for Domestic Water Systems

604.8

B483.1—07

Drinking Water Treatment Units

611.1611.2

B481.3

Sizing, Selection, Location and Installation of Grease Interceptors

1003.3.4

B481.1—07

Testing and Rating of Grease interceptors Using Lard

1003.3.4

B602—02

Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe

705.2.1705.5.3705.6705.7.1705.14.1705.15705.16.2705.19

ICC

International Code Council, Inc.
500 New Jersey Ave, NW
6th Floor
Washington DC 20001
Standard
reference
number
TitleReferenced
in code
section number

IECC—12

International Energy Conservation Code®

313.1

IFC—12

International Fire Code®

201.31201.1

IFGC—12

International Fuel Gas Code®

201.3502.1

IMC—12

International Mechanical Code®

201.3307.6310.1422.9502.1612.11202.1

IPSDC—12

International Private Sewage Disposal Code®

701.2

ISEA

International Safety Equipment Association
1901 N.Moore Street, Suite 808
Arlington VA 22209
Standard
reference
number
TitleReferenced
in code
section number

Z358.1—98

Emergency Eyewash and Shower Equipment

411.1

NFPA

National Fire Protection Association
1 Batterymarch Park
Quincy MA 02169-7471
Standard
reference
number
TitleReferenced
in code
section number

50—01

Bulk Oxygen Systems at Consumer Sites

1203.1

51—07

Design and Installation of Oxygen-fuel Gas Systems for Welding, Cutting and Allied Processes

1203.1

70—11

National Electric Code

502.1504.31114.1.3

99C—05

Gas and Vacuum Systems

1202.1

NSF

NSF International
789 Dixboro Road
Ann Arbor MI 48105
Standard
reference
number
TitleReferenced
in code
section number

3—2008

Commercial Warewashing Equipment

409.1

14—2008e

Plastic Piping System Components and Related Materials

303.3611.3

18—2007

Manual Food and Beverage Dispensing Equipment

426.1

42—2007ae

Drinking Water Treatment Units-Aesthetic Effects

611.1611.3

44—2007

Residential Cation Exchange Water Softeners

611.1611.3

50—2009

Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities

1302.6.1

53—2007a

Drinking Water Treatment Units-Health Effects

611.1611.3

58—2007

Reverse Osmosis Drinking Water Treatment Systems

611.2611.3

61—2008

Drinking Water System Components-Health Effects

410.1424.1605.3605.4605.5605.7611.3

62—2007

Drinking Water Distillation Systems

611.1

PDI

Plumbing and Drainage Institute
800 Turnpike Street, Suite 300
North Andover MA 01845
Standard
reference
number
TitleReferenced
in code
section number

G101(2003)

Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Installation Data

1003.3.4

G102

Testing and Certification for Grease Interceptors with Fog Sensing and Alarm Devices

1003.3.4

UL

Underwriters Laboratories, Inc.
333 Pfingsten Road
Northbrook IL 60062-2096
Standard
reference
number
TitleReferenced
in code
section number

508—99

Industrial Control Equipment - with revision through April 2010

314.2.3

Resources