Chapter 8 Referenced Standards

AMENDMENT
This section has been amended at the state or city level. Amendments are shown in green text.
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.7.

ASSE ASSE International
18927 Hickory Creek Drive, Suite 220
Mokena, Illinois 60448
Standard
reference
number
Title Referenced
in code
section number
ASSE 5010-1013-1 Field Test Procedure for a Reduced Pressure Principle Assembly Using a Differential Pressure Gauge, 1991 505.3.2
ASSE 5010-1015-1 Field Test Procedure for a Double Check Valve Assembly Using a Duplex Gauge, 1991 505.3.2
ASSE 5010-1015-2 Field Test Procedure for a Double Check Valve Assembly Using a Differential Pressure Gauge - High- and Low-Pressure Hose Method, 1991 505.3.2
ASSE 5010-1015-3 Field Test Procedure for a Double Check Valve Assembly Using a Differential Pressure Gauge - High Pressure Hose Method, 1991 505.3.2
ASSE 5010-1015-4 Field Test Procedure for a Double Check Valve Assembly Using a Site Tube, 1991 505.3.2
ASSE 5010-1020-1 Field Test Procedures for a Pressure Vacuum Breaker Assembly, 1991 505.3.2
ASSE 5010-1047-1 Field Test Procedure for a Reduced Pressure Detector Assembly Using a Differential Pressure Gauge, 1991 505.3.2
ASSE 5010-1048-1 Field Test Procedure for a Double Check Detector Assembly Using a Duplex Gauge, 1991 505.3.2
ASSE 5010-1048-2 Field Test Procedure for a Double Check Detector Assembly Using a Differential Pressure Gauge - High- and Low-Pressure Hose Method, 1991 505.3.2
ASSE 5010-1048-3 Field Test Procedure for a Double Check Detector Assembly Using a Differential Pressure Gauge - High-Pressure Hose Method, 1991 505.3.2
ASSE 5010-1048-4 Field Test Procedure for a Double Check Detector Assembly Using a Site Tube, 1991 505.3.2

ASME American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016-5990
Standard
reference
number
Title Referenced
in code
section number
ASME A17.1/CSA B44‒2013 Safety Code for Elevators and Escalators 606.1

ASTM ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
Standard
reference
number
Title Referenced
in code
section number
F 1346‒91 (2010) Performance Specifications for Safety Covers and Labeling Requirements
for All Covers for Swimming Pools, Spas and Hot Tubs
303.2

CSA Canadian Standards Association
8501 East Pleasant Valley
Cleveland, OH 44131-5516
Standard
reference
number
Title Referenced
in code
section number
CAN/CSA-B64.10-01 Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance and Field Testing of Backflow Prevention Devices 505.3.2

ICC International Code Council
500 New Jersey Avenue, NW
6th Floor
Washington, DC 20001
Standard
reference
number
Title Referenced
in code
section number
IBC‒15 International Building Code® 102.3, 201.3, 304.1.1, 305.1.1, 306.1.1, 401.3, 702.3
IEBC‒15 International Existing Building Code® 102.3, 305.1.1, 306.1.1
IFC‒15 International Fire Code® 102.3, 201.3, 604.3.1.1, 604.3.2.1, 702.1, 702.2, 704.1, 704.2
IFGC‒15 International Fuel Gas Code® 102.3
IMC‒15 International Mechanical Code® 102.3, 201.3
IPC‒15 International Plumbing Code® 102.3, 201.3, 505.1, 602.2, 602.3
IRC‒15 International Residential Code® 102.3, 201.3
IZC‒15 International Zoning Code® 102.3, 201.3

NFPA National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02269
Standard
reference
number
Title Referenced
in code
section number
25‒14 Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems 704.1.1
70‒14 National Electrical Code 102.4, 201.3, 604.2
Resources
Help us
keep law free