Heads up:
There are no amended sections in this chapter.
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.4.
AA | Aluminum Association 1525 Wilson Boulevard, Suite 600 Arlington, VA 22209 | |
Standard reference number | Title | Referenced in code section number |
ADM1—2015 | Aluminum Design Manual: Part 1—A Specification for Aluminum Structures | 1604.3.5, 2002.1 |
ASM 35—00 | Aluminum Sheet Metal Work in Building Construction (Fourth Edition) | 2002.1 |
AAMA | American Architectural Manufacturers Association 1827 Waldon Office Square, Suite 550 Schaumburg, IL 60173 | |
Standard reference number | Title | Referenced in code section number |
1402—09 AAMA/WDMA/CSA | Standard Specifications for Aluminum Siding, Soffit and Fascia | 1404.5.1 |
101/I.S.2/A440—11 | North American Fenestration Standard/Specifications for Windows, Doors and Skylights | 1709.5.1, 2405.5 |
AISC | American Institute of Steel Construction One East Wacker Drive, Suite 700 Chicago, IL 60601-18021 | |
Standard reference number | Title | Referenced in code section number |
341—10 | Seismic Provisions for Structural Steel Buildings | 1613.4.1, 1705.12.1.1, 1705.12.1.2, 1705.13.1.1, 1705.13.1.2, 2205.2.1.1, 2205.2.1.2, 2205.2.2, 2206.2.1 |
360—10 | Specification for Structural Steel Buildings | 722.5.2.2.1, 1604.3.3, 1705.2.1, 2203.1, 2203.2, 2205.1, 2205.2.1.1, 2206.1 |
AISI | American Iron and Steel Institute 25 Massachusetts Avenue, NW Suite 800 Washington, DC 20001 | |
Standard reference number | Title | Referenced in code section number |
AISI S100—12 | North American Specification for the Design of Cold-formed Steel Structural Members, 2012 | 1604.3.3, 1905.1.8, 2203.1, 2203.2, 2210.1, 2210.2, 2211.2, 2211.4, 2211.6 |
AISI S110—07/ S1-09 (2012) | Standard for Seismic Design of Cold-Formed Steel Structural Systems—Special Moment Frames, 2007 with Supplement 1, dated 2009 (Reaffirmed 2012) | 2210.2 |
AISI S200—12 | North American Standard for Cold-Formed Steel Framing-General Provisions, 2012 | 2203.1, 2203.2, 2211.1, Table 2603.12.1, Table 2603.12.2 |
AISI S210—07(2012) | North American Standard for Cold-Formed Steel Framing-Floor and Roof System Design, 2007 (Reaffirmed 2012) | 2211.5 |
AISI S211—07/ S1-12(2012) | North American Standard for Cold-Formed Steel Framing-Wall Stud Design, 2007 including Supplement 1, dated 2012 (Reaffirmed 2012) | 2211.4 |
AISI S212—07(2012) | North American Standard for Cold-Formed Steel Framing-Header Design, 2007, (Reaffirmed 2012) | 2211.2 |
AISI S213—07/ S1-09 (2012) | North American Standard for Cold-Formed Steel Framing-Lateral Design, 2007, with Supplement 1, dated 2009, (Reaffirmed 2012) | 2211.6 |
AISI S214—12 | North American Standard for Cold-formed Steel Framing-Truss Design, 2012 | 2211.3, 2211.3.1, 2211.3.2 |
AISI S220—11 | North American Standard for Cold-formed Steel Framing-Nonstructural Members | 2203.1, 2203.2, 2211.1, Table 2506.2, Table 2507.2 |
AISI S230—07/ S3-12(2012) | Standard for Cold-formed Steel Framing-Prescriptive Method for One- and Two-family Dwellings, 2007, with Supplement 3, dated 2012 (Reaffirmed 2012) | 1609.1.1, 1609.1.1.1, 2211.7 |
ALI | Automotive Lift Institute P.O. Box 85 Courtland, NY 13045 | |
Standard reference number | Title | Referenced in code section number |
ALI ALCTV—2011 | Standard for Automotive Lifts—Safety Requirements for Construction, Testing and Validation (ANSI) | 3001.2 |
AMCA | Air Movement and Control Association International 30 West University Drive Arlington Heights, IL 60004 | |
Standard reference number | Title | Referenced in code section number |
540—08 | Test Method for Louvers Impacted by Wind Borne Debris | 1609.1.2.1 |
ANSI | American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 | |
Standard reference number | Title | Referenced in code section number |
A13.1—2007 | Scheme for the Identification of Piping Systems | 415.11.6.5 |
A108.1A—99 | Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar | 2103.2.3 |
A108.1B—99 | Installation of Ceramic Tile, quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar | 2103.2.3 |
A108.4—99 | Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-setting Epoxy Adhesive | 2103.2.3.6 |
A108.5—99 | Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex-Portland Cement Mortar | 2103.2.3.1, 2103.2.3.2 |
A108.6—99 | Installation of Ceramic Tile with Chemical-resistant, Water Cleanable Tile-setting and -grouting Epoxy | 2103.2.3.3 |
A108.8—99 | Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout | 2103.2.3.4 |
A108.9—99 | Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout | 2103.2.3.5 |
A108.10—99 | Installation of Grout in Tilework | 2103.2.3.7 |
A118.1—99 | American National Standard Specifications for Dry-set Portland Cement Mortar | 2103.2.3.1 |
A118.3—99 | American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive | 2103.2.3.3 |
A118.4—99 | American National Standard Specifications for Latex-Portland Cement Mortar | 2103.2.3.2, 2103.3.2.4 |
A118.5—99 | American National Standard Specifications for Chemical Resistant Furan Mortar and Grouts for Tile Installation | 2103.2.3.4 |
A118.6—99 | American National Standard Specifications for Cement Grouts for Tile Installation | 2103.2.3.7 |
A118.8—99 | American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout | 2103.2.3.5 |
A136.1—99 | American National Standard Specifications for Organic Adhesives for Installation of Ceramic Tile | 2103.2.3.6 |
A137.1—12 | American National Standard Specifications for Ceramic Tile | 202 |
ANSI/A 190.1—12 | Structural Glued Laminated Timber | 2303.1.3, 2306.1 |
Z 97.1—14 | Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods of Test | 2406.1.2, 2406.2, Table 2406.2(2), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1 |
APA | APA - Engineered Wood Association 7011 South 19th Tacoma, WA 98466 | |
Standard reference number | Title | Referenced in code section number |
ANSI/A 190.1—12 | Structural Glued Laminated Timber | 2303.1.3, 2306.1 |
ANSI/APA PRP 210—08 | Standard for Performance-Rated Engineered Wood Siding | 2303.1.5, 2304.7, 2306.3, Table 2306.3(1) |
ANSI/APA PRR 410—11 | Standard for Performance-Rated Engineered Wood Rim Boards | 2303.1.13 |
APA PDS—12 | Panel Design Specification | 2306.1 |
APA PDS Supplement 1—12 | Design and Fabrication of Plywood Curved Panels (revised 2013) | 2306.1 |
APA PDS Supplement 2—12 | Design and Fabrication of Plywood-lumber Beams (revised 2013) | 2306.1 |
APA PDS Supplement 3—12 | Design and Fabrication of Plywood Stressed-skin Panels (revised 2013) | 2306.1 |
APA PDS Supplement 4—12 | Design and Fabrication of Plywood Sandwich Panels (revised 2013) | 2306.1 |
APA PDS Supplement 5—12 | Design and Fabrication of All-plywood Beams (revised 2013) | 2306.1 |
APA PRG 320—11 | Standard for Performance-Rated Cross-Laminated Timber | 2303.1.4 |
EWS R540—12 | Builders Tips: Proper Storage and Handling of Glulam Beams | 2306.1 |
EWS S475—07 | Glued Laminated Beam Design Tables | 2306.1 |
EWS S560—10 | Field Notching and Drilling of Glued Laminated Timber Beams | 2306.1 |
EWS T300—07 | Glulam Connection Details | 2306.1 |
EWS X440—08 | Product Guide-Glulam | 2306.1 |
EWS X450—01 | Glulam in Residential Construction-Western Edition | 2306.1 |
ASABE | American Society of Agricultural and Biological Engineers 2950 Niles Road St. Joseph, MI 49085 | |
Standard reference number | Title | Referenced in code section number |
EP 484.2 June 1998 (R2008) | Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings | 2306.1 |
EP 486.2 OCT 2012 | Shallow-post and Pier Foundation Design | 2306.1 |
EP 559.1 W/Corr.1 AUG 2010 | Design Requirements and Bending Properties for Mechanically Laminated Wood Assemblies | 2306.1 |
ASME | American Society of Mechanical Engineers Two Park Avenue New York, NY 10016-5990 | |
Standard reference number | Title | Referenced in code section number |
ASME/A17.1—13 CSA B44—2013 | Safety Code for Elevators and Escalators | 907.3.3, 911.1.5, 1009.4, 1607.9.1, 3001.2, 3001.4, 3002.5, 3003.2, 3007.1, 3008.1.3, 3008.7.1 |
A17.7—2007/ CSA B44—07 | Performance-Based Safety Code for Elevators and Escalators | 3001.2 |
A18.1—2008 | Safety Standard for Platform Lifts and Stairway Chairlifts | 1109.8 |
A90.1—09 | Safety Standard for Belt Manlifts | 3001.2 |
B16.18—2012 | Cast Copper Alloy Solder Joint Pressure Fittings | 909.13.1 |
B16.22—2001(R2010) | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | 909.13.1 |
B20.1—2009 | Safety Standard for Conveyors and Related Equipment | 3001.2, 3004.3 |
B31.3—2012 | Process Piping | 415.11.6 |
ASSE | American Society of Safety Engineers 1800 East Oakton Street Des Plaines, IL 60018 | |
Standard reference number | Title | Referenced in code section number |
ANSI/ASSE Z359.1-2007 | Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components, Part of the Fall Protection Code | 1015.6, 1015.7 |
ASTM | ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 | |
Standard reference number | Title | Referenced in code section number |
A6/A6M—11 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet | 1810.3.2.3, 1810.3.5.3.1, 1810.3.5.3.3 |
A36/A36M—08 | Specification for Carbon Structural Steel | 1810.3.2.3 |
A153/A153M—09 | Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware | 2304.10.5 |
A240/A240M—13A | Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications | Table 1507.4.3(1) |
A252—10 | Specification for Welded and Seamless Steel Pipe Piles | 1810.3.2.3 |
A283/A283M—12A | Specification for Low and Intermediate Tensile Strength Carbon Steel Plates | 1810.3.2.3 |
A416/A416M—12A | Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete | 1810.3.2.2 |
A463/A463M—10 | Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process | Table 1507.4.3(2) |
A572/A572M—12A | Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel | 1810.3.2.3 |
A588/A588M—10 | Specification for High-strength Low-alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance | 1810.3.2.3 |
A615/A615M—12 | Specification for Deformed and Plain Billet-steel Bars for Concrete Reinforcement | 1704.5, 1810.3.10.2 |
A653/A653M—11 | Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process | Table 1507.4.3(1), Table 1507.4.3(2), 2304.10.5.1 |
A690/A690M—07(2012) | Standard Specification for High-strength Low-alloy Nickel, Copper, Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments | 1810.3.2.3 |
A706/A706M—09b | Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement | 1704.5, 2107.4, 2108.3 |
A722/A722M—12 | Specification for Uncoated High-strength Steel Bar for Prestressing Concrete | 1810.3.10.2 |
A755/A755M—2011 | Specification for Steel Sheet, Metallic-coated by the Hot-dip Process and Prepainted by the Coil-coating Process for Exterior Exposed Building Products | Table 1507.4.3(1), Table 1507.4.3(2) |
A792/A792M—10 | Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the Hot-dip Process | Table 1507.4.3(1), Table 1507.4.3(2) |
A875/A875M—13 | Standard Specification for Steel Sheet Zinc-5 percent, Aluminum Alloy-coated by the Hot-dip Process | Table 1507.4.3(2) |
A924/A924M—13 | Standard Specification for General Requirements for Steel Sheet, Metallic-coated by the Hot-dip Process | Table 1507.4.3(1) |
B42—10 | Specification for Seamless Copper Pipe, Standard Sizes | 909.13.1 |
B43—09 | Specification for Seamless Red Brass Pipe, Standard Sizes | 909.13.1 |
B68—11 | Specification for Seamless Copper Tube, Bright Annealed (Metric) | 909.13.1 |
B88—09 | Specification for Seamless Copper Water Tube | 909.13.1 |
B101—12 | Specification for Lead-coated Copper Sheet and Strip for Building Construction | 1404.5.3, Table 1507.2.9.2, Table 1507.4.3(1) |
B209—10 | Specification for Aluminum and Aluminum Alloy Steel and Plate | Table 1507.4.3(1) |
B251—10 | Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube | 909.13.1 |
B280—08 | Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service | 909.13.1 |
B370—12 | Specification for Copper Sheet and Strip for Building Construction | 1404.5.2, Table 1507.2.9.2, Table 1507.4.3(1) |
B695—04(2009) | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel Strip for Building Construction | 2304.10.5.1, 2304.10.5.3 |
C5—10 | Specification for Quicklime for Structural Purposes | Table 2507.2 |
C22/C22M-00(2010) | Specification for Gypsum | Table 2506.2 |
C27—98(2008) | Specification for Classification of Fireclay and High-alumina Refractory Brick | 2111.6 |
C28/C28M—10 | Specification for Gypsum Plasters | Table 2507.2 |
C31/C31M—12 | Practice for Making and Curing Concrete Test Specimens in the Field | Table 1705.3 |
C33/C33M—13 | Specification for Concrete Aggregates | 722.3.1.4, 722.4.1.1.3 |
C35/C35M-1995(2009) | Specification for Inorganic Aggregates for Use in Gypsum Plaster | Table 2507.2 |
C55—2011 | Specification for Concrete Building Brick | Table 722.3.2 |
C59/C59M—00 (2011) | Specification for Gypsum Casting Plaster and Molding Plaster | Table 2507.2 |
C61/C61M—00 (2011) | Specification for Gypsum Keene's Cement | Table 2507.2 |
C62—13 | Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale) | 1807.1.6.3 |
C67—13 | Test Methods of Sampling and Testing Brick and Structural Clay Tile | 721.4.1.1.1, 2109.3.1.1 |
C73—10 | Specification for Calcium Silicate Brick (Sand-lime Brick) | Table 722.3.2 |
C90—13 | Specification for Loadbearing Concrete Masonry Units | Table 722.3.2, 1807.1.6.3 |
C91—12 | Specification for Masonry Cement | Table 2507.2 |
C94/C94M—13 | Specification for Ready-Mixed Concrete | 110.3.1 |
C140—13 | Test Method Sampling and Testing Concrete Masonry Units and Related Units | 722.3.1.2 |
C150—12 | Specification for Portland Cement | 1903.1, Table 2507.2 |
C172/C172M—10 | Practice for Sampling Freshly Mixed Concrete | Table 1705.3 |
C199—84 (2011) | Test Method for Pier Test for Refractory Mortars | 2111.6, 2111.9, 2113.12 |
C206—13 | Specification for Finishing Hydrated Lime | Table 2507.2 |
C208—12 | Specification for Cellulosic Fiber Insulating Board | Table 1508.2, 2303.1.6 |
C216—13 | Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) | 1807.1.6.3 |
C270—12a | Specification for Mortar for Unit Masonry | 2103.3.2.4 |
C315—07(2011) | Specification for Clay Flue Liners and Chimney Pots | 2111.9, 2113.11.1, Table 2113.16(1) |
C317/C317M—00(2010) | Specification for Gypsum Concrete | 2514.1 |
C330/C330M—2009 | Specification for Lightweight Aggregates for Structural Concrete | 202 |
C331/C331M—2010 | Specification for Lightweight Aggregates for Concrete Masonry Units | 722.3.1.4, 722.4.1.1.3 |
C406/C406M—2010 | Specification for Roofing Slate | 1507.7.5 |
C472—99 (2009) | Specification for Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete | Table 2506.2 |
C473—12 | Test Method for Physical Testing of Gypsum Panel Products | Table 2506.2 |
C474—13 | Test Methods for Joint Treatment Materials for Gypsum Board Construction | Table 2506.2 |
C475/C475M—12 | Specification for Joint Compound and Joint Tape for Finishing Gypsum Board | Table 2506.2 |
C514—04(2009)e1 | Specification for Nails for the Application of Gypsum Board | Table 721.1(2), Table 721.1(3), Table 2306.7, Table 2506.2 |
C516—08 | Specifications for Vermiculite Loose Fill Thermal Insulation | 722.3.1.4, 722.4.1.1.3 |
C547—12 | Specification for Mineral Fiber Pipe Insulation | Table 721.1(2), Table 721.1(3) |
C549—06(2012) | Specification for Perlite Loose Fill Insulation | 722.3.1.4, 722.4.1.1.3 |
C552—12b | Standard Specification for Cellular Glass Thermal Insulation | Table 1508.2 |
C557—03(2009)e01 | Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing | Table 2506.2 |
C578—12b | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation | Table 1508.2, 2603.10, Table 2603.12.1, Table 2603.12.2 |
C587—04(2009) | Specification for Gypsum Veneer Plaster | Table 2507.2 |
C595/C595—13 | Specification for Blended Hydraulic Cements | 1903.1, Table 2507.2 |
C631—09 | Specification for Bonding Compounds for Interior Gypsum Plastering | Table 2507.2 |
C635/C635M—13 | Specification for the Manufacture, Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings | 808.1.1, 2506.2.1 |
C636/C636M—08 | Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels | 808.1.1.1 |
C645—13 | Specification for Nonstructural Steel Framing Members | Table 2506.2, Table 2507.2 |
C652—13 | Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale) | 1807.1.6.3 |
C726—12 | Standard Specification for Mineral Roof Insulation Board | Table 1508.2 |
C728—05(2013) | Standard Specification for Perlite Thermal Insulation Board | Table 1508.2 |
C744—11 | Specification for Prefaced Concrete and Calcium Silicate Masonry Units | Table 722.3.2 |
C754—11 | Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products | Table 2508.1, Table 2511.1.1 |
C836/C836M—12 | Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course | 1507.15.2 |
C840—11 | Specification for Application and Finishing of Gypsum Board | Table 2508.1, 2509.2 |
C841—03(2008)E1 | Specification for Installation of Interior Lathing and Furring | Table 2508.1, Table 2511.1.1 |
C842—05(2010)E1 | Specification for Application of Interior Gypsum Plaster | Table 2511.1.1, 2511.3, 2511.4 |
C843—99 (2012) | Specification for Application of Gypsum Veneer Plaster | Table 2511.1.1 |
C844—04(2010) | Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster | Table 2508.1 |
C847—12 | Specification for Metal Lath | Table 2507.2 |
C887—05(2010) | Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar | 1805.2.2, 2103.2.2 |
C897—05(2009) | Specification for Aggregate for Job-Mixed Portland Cement-based Plaster | Table 2507.2 |
C920—11 | Standard for Specification for Elastomeric Joint Sealants | Table 2506.2 |
C926—13 | Specification for Application of Portland Cement-based Plaster | 2109.3.4.8, 2510.3, Table 2511.1.1, 2511.3, 2511.4, 2512.1, 2512.1.2, 2512.2, 2512.6, 2512.8.2, 2512.9, 2513.7 |
C932—06(2013) | Specification for Surface-applied Bonding Compounds for Exterior Plastering | Table 2507.2 |
C933—13 | Specification for Welded Wire Lath | Table 2507.2 |
C946—10 | Specification for Construction of Dry-stacked, Surface-bonded Walls | 2103.2.2, 2109.2.2 |
C954—11 | Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness | Table 2506.2, Table 2507.2 |
C955—11C | Standard Specification for Load-bearing Transverse and Axial Steel Studs, Runners Tracks, and Bracing or Bridging, for Screw Application of Gypsum Panel Products and Metal Plaster Bases | Table 2506.2, Table 2507.2 |
C956—04(2010) | Specification for Installation of Cast-in-place Reinforced Gypsum Concrete | 2514.1 |
C957—10 | Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface | 1507.15.2 |
C1002—07 | Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs | Table 2506.2, Table 2507.2 |
C1007—11a | Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories | Table 2508.1, Table 2511.1.1 |
C1029—13 | Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation | 1507.14.2 |
C1032—06(2011) | Specification for Woven Wire Plaster Base | Table 2507.2 |
C1047—10A | Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base | Table 2506.2, Table 2507.2 |
C1063—12D | Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-based Plaster | 2109.3.4.8, 2510.3, Table 2511.1.1, 2512.1.1 |
C1088—13 | Specification for Thin Veneer Brick Units Made from Clay or Shale | Table 721.1(2) |
C1157/C1157M—11 | Standard Performance Specification for Hydraulic Cement | 1903.1, Table 2507.2 |
C1167—11 | Specification for Clay Roof Tiles | 1507.3.4 |
C1177/C1177M—08 | Specification for Glass Mat Gypsum Substrate for Use as Sheathing | Table 1508.2, Table 2506.2 |
C1178/C1178M—11 | Specification for Coated Mat Water-resistant Gypsum Backing Panel | Table 2506.2, Table 2509.2 |
C1186—08(2012) | Specification for Flat Fiber Cement Sheets | 1404.10, 1405.16.1, 1405.16.2 |
C1261—10 | Specification for Firebox Brick for Residential Fireplaces | 2111.6, 2111.9 C 1278/ |
C1278M—07a(2011) | Specification for Fiber-reinforced Gypsum Panels | Table 1508.2, Table 2506.2 |
C1280—13 | Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing | Table 2508.1, 2508.2 |
C1283—11 | Practice for Installing Clay Flue Lining | 2113.9.1, 2113.12 |
C1288—99(2010) | Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets | Table 2509.2 |
C1289—13E1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board | Table 1508.2 2603.0, Table 2603.12.1, Table 2603.12.2 |
C1313/C1313M—12 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications | 1509.4 |
C1325—08b | Standard Specification for Nonasbestos Fiber-mat Reinforced Cement Backer Units | Table 2509.2 |
C1328/C1328M—12 | Specification for Plastic (Stucco Cement) | Table 2507.2 |
C1364—10B | Standard Specification for Architectural Cast Stone | 2103.1 |
C1386—07 | Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units | 202 |
C1396M/C1396M—13 | Specification for Gypsum Board | Figure 722.5.1(2), Figure 722.5.1(3) |
C1492—03(2009) | Standard Specification for Concrete Roof Tile | 1507.3.5 |
C1600/C 1600M—11 | Standard Specification for Rapid Hardening Hydraulic Cement | Table 2507.2 |
C1629/ C1629M—06(2011) | Standard Classification for Abuse-resistant Nondecorated Interior Gypsum Panel Products and Fiber-reinforced Cement Panels | 403.2.3.1, 403.2.3.2, 403.2.3.4 |
C1658/C1658M—12 | Standard Specification for Glass Mat Gypsum Panels | Table 2506.2 |
D25—12 | Specification for Round Timber Piles | 1810.3.2.4, 2303.1.12 |
D41—05 | Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing | Table 1507.10.2 |
D43—00 (2006) | Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing | Table 1507.10.2 |
D56—05(2010) | Test Method for Flash Point By Tag Closed Tester | 202 |
D86—2012 | Test Method for Distillation of Petroleum Products at Atmospheric Pressure | 202 |
D93—2012 | Test Method for Flash Point By Pensky-Martens Closed Cup Tester | 202 |
D225—07 | Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules | 1507.2.5 |
D226/D226M—09 | Specification for Asphalt-saturated Organic Felt Used in Roofing and Waterproofing | 1404.2, 1505.2, 1507.2.3, 1507.2.8.1, 1507.3.3, 1507.4.5 1507.5.3, 1507.6.3, 1507.6.3.1, 1507.7.3, Table 1507.8, 1507.8.3, 1507.9.3, 1507.9.5, Table 1507.10.2, 1507.17.3, 1507.17.4.1 |
D227/D227M— 03(2011)E1 | Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing | Table 1507.10.2 |
D312—00 (2006) | Specification for Asphalt Used in Roofing | Table 1507.10.2 |
D422—63 (2007) | Test Method for Particle-size Analysis of Soils | 1803.5.3 |
D448—08 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction | 1507.12.3, 1507.13.3 |
D450—07 | Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing | Table 1507.10.2 |
D635—10 | Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | 2606.4 |
D1143/D1143M—07e1 | Test Method for Piles Under Static Axial Compressive Load | 1810.3.3.1.2 |
D1227—95 (2007) | Specification for Emulsified Asphalt Used as a Protective Coating for Roofing | Table 1507.10.2, 1507.15.2 |
D1557—12 | Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort [56,000 ft-lb/ft3 (2,700 KN m/m3)] | 1705.6, 1804.5 |
D1863/D1863M— 05(2011)E1 | Specification for Mineral Aggregate Used on Built-up Roofs | Table 1507.10.2 |
D1929—12 | Test Method for Determining Ignition Temperature of Plastics | 402.6.4.4, 406.7.2, 1407.11.2.1, 1407.11.3.3, 1407.11.4.2, 2606.4 |
D1970/D1970M—2013 | Specification for Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection | 1507.2.4, 1502.2.8.1, 1507.2.9.2, 1507.3.3.3 1507.3.9, 1507.4.5, 1507.5.3.1, 1507.5.7, 1507.6.3.1, 1507.7.3.1, 1507.8.3.1, 1507.8.8, 1507.9.3.1, 1507.9.9, 1507.17.4.1 |
D2178—04 | Specification for Asphalt Glass Felt Used in Roofing and Waterproofing | Table 1507.10.2 |
D2487—2011 | Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | Table 1610.1, 1803.5.1 |
D2626/D2626M— 04(2012)E1 | Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing | 1507.3.3 Table 1507.10.2 |
D2822/ D2822M-05(2011)E1 | Specification for Asphalt Roof Cement, Asbestos Containing | Table 1507.10.2 |
D2823/D2823M— 05(2011)E1 | Specification for Asphalt Roof Coatings, Asbestos Containing | Table 1507.10.2 |
D2824—06(2012)E1 | Standard Specification for Aluminum-Pigmented Asphalt Roof Coating, Nonfibered, Asbestos Fibered and Fibered without Asbestos | Table 1507.10.2 |
D2843—10 | Test for Density of Smoke from the Burning or Decomposition of Plastics | 2606.4 |
D2859—06(2011) | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials | 804.4.1 |
D2898—10 | Test Methods for Accelerated Weathering of Fire-retardant-treated Wood for Fire Testing | 1505.1, 2303.2.4, 2303.2.6 |
D3019—08 | Specification for Lap Cement Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos Fibered | Table 1507.10.2 |
D3161/D3161M—13 | Test Method for a Wind Resistance of Asphalt Shingles (Fan Induced Method) | 1504.1.1, Table 1504.1.1, 1507.17.8 |
D3200—74 (2012) | Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles | 2303.1.12 |
D3201—2013 | Test Method for Hygroscopic Properties of Fire-retardant-treated Wood and Wood-based Products | 2303.2.7 |
D3278—1996 (2011) | Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus | 202 |
D3462/D3462M—10A | Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules | 1507.2.5 |
D3468—99 (2006) e01 | Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing | 1507.15.2 |
D3679—11 | Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding | 1404.9, 1405.14 |
D3689—2013E1 | Test Methods for Deep Foundations Under Static Axial Tensile Load | 1810.3.3.1.5 |
D3737—2012 | Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) | 2303.1.3 |
D3746—85 (2008) | Test Method for Impact Resistance of Bituminous Roofing Systems | 1504.7 |
D3747—79 (2007) | Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation | Table 1507.10.2 |
D3909/ D3909M—97b (2012)e1 | Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules | 1507.2.9.2, 1507.6.5, Table 1507.10.2 |
D3957—09 | Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings | 2303.1.11 |
D4022/D4022M— 2007(2012)E1 | Specification for Coal Tar Roof Cement, Asbestos Containing | Table 1507.10.2 |
D4272—09 | Test Method for Total Energy Impact of Plastic Films by Dart Drop | 1504.7 |
D4318—10 | Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils | 1803.5.3 |
D4434/D4434M—12 | Specification for Poly (Vinyl Chloride) Sheet Roofing | 1507.13.2 |
D4479/D4479M— 07(2012)E1 | Specification for Asphalt Roof Coatings-Asbestos-free | Table 1507.10.2 |
D4586/D4586M— 07(2012)E1 | Specification for Asphalt Roof Cement-Asbestos-free | Table 1507.10.2 |
D4601/D4601M— 04(2012)E1 | Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing | Table 1507.10.2 |
D4637/D4637M—13 | Specification for EPDM Sheet Used in Single-ply Roof Membrane | 1507.12.2 |
D4829—11 | Test Method for Expansion Index of Soils | 1803.5.3 |
D4869/D4869M— 05(2011)e01 | Specification for Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope Roofing | 1507.2.3, 1507.2.8.1, 1507.4.5, 1507.5.3, 1507.5.3.1, 1507.6.3, 1507.7.3, 1507.7.3.1, 1507.8.3, 1507.8.3.1, 1507.9.3, 1507.9.3.1, 1507.17.3, 1507.17.4.1 |
D4897/D4897M— 01(2009) | Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing | Table 1507.10.2 |
D4945—12 | Test Method for High-strain Dynamic Testing of Piles | 1810.3.3.1.2 |
D4990—97a (2005) e01 | Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing | Table 1507.10.2 |
D5019—07a | Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane | 1507.12.2 |
D5055—13 | Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists | 2303.1.2 |
D5456—12 | Specification for Evaluation of Structural Composite Lumber Products | 2303.1.10 |
D5516—09 | Test Method of Evaluating the Flexural Properties of Fire-retardant-treated Softwood Plywood Exposed to the Elevated Temperatures | 2303.2.5.1 |
D5643/D5643M— 06(2012)E1 | Specification for Coal Tar Roof Cement, Asbestos-free | Table 1507.10.2 |
D5664—10 | Test Methods for Evaluating the Effects of Fire-retardant Treatment and Elevated Temperatures on Strength Properties of Fire-retardant-treated Lumber | 2303.2.5.2 |
D5665—99a (2006) | Specification for Thermoplastic Fabrics Used in Cold-applied Roofing and Waterproofing | Table 1507.10.2 |
D5726—98 (2005) | Specification for Thermoplastic Fabrics Used in Hot-applied Roofing and Waterproofing | Table 1507.10.2 |
D6083—05e01 | Specification for Liquid Applied Acrylic Coating Used in Roofing | Table 1507.10.2, Table 1507.14.3, 1507.15.2 |
D6162—2000A (2008) | Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements | 1507.11.2 |
D6163—00 (2008) | Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements | 1507.11.2 |
D6164/D6164M—11 | Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Metal Materials Using Polyester Reinforcements | 1507.11.2 |
D6222/D6222M—11 | Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements | 1507.11.2 |
D6223/D6223M— 02(2011)E1 | Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements | 1507.11.2 |
D6298—05e1 | Specification for Fiberglass Reinforced Styrene-butadiene-styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface | 1507.11.2 |
D6305—08 | Practice for Calculating Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood Roof Sheathing | 2303.2.5.1 |
D6380—03 (2009) | Standard Specification for Asphalt Roll Roofing (Organic) Felt | 1507.2.9.2, 1507.3.3, 1507.6.5 |
D6509/D6509M—09 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous base Sheet Materials Using Glass Fiber Reinforcements | 1507.11.2 |
D6694—08 | Standard Specification for Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems | Table 1507.14.3, 1507.15.2 |
D6754/D6745M—10 | Standard Specification for Ketone Ethylene Ester Based Sheet Roofing | 1507.13.2 |
D6757—2013 | Standard Specification for Underlayment for Use with Steep Slope Roofing | 1507.2.3, 1507.17.3, 1507.17.4.1 |
D6841—08 | Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-retardant-treated Lumber | 2303.2.5.2 |
D6878/D6878M—11a | Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing | 1507.13.2 |
D6947—07 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System | .Table 1507.14.3, 1507.15.2 |
D7032—10a | Standard Specification for Establishing Performance Ratings for Wood, Plastic Composite Deck Boards and Guardrail Systems (Guards or Rails) | 2612.2.1, 2612.4, 2612.5.1 |
D7147—05 | Specification for Testing and Establishing Allowable Loads of Joist Hangers | 2303.5, 2304.10.3 |
D7158/D7158M—11 | Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method) | 1504.1.1, Table 1504.1.1 |
D7254—07 | Standard Specification for polypropylene (PP) siding | 1404.12 |
D7655—12 | Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems | 1507.12.3, 1507.13.3 |
D7672—2012 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies | 2303.1.13 |
E84—2013A | Test Methods for Surface Burning Characteristics of Building Materials | 202, 402.6.4.4, 406.7.2, 703.5.2, 720.1, 720.4, 803.1.1, 803.1.4, 803.10, 803.11, 806.7, 1404.12.1, 1407.9, 1407.10.1, 1409.9, 1409.10.1, 1510.6.2, 1510.6.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2603.7.1, 2603.7.2, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.4 |
E90—09 | Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements | 1207.2, 1207.2.1 |
E96/E96M—2013 | Test Method for Water Vapor Transmission of Materials | 202 |
E108—2011 | Test Methods for Fire Tests of Roof Coverings | 1505.1, 2603.6, 2610.2, 2610.3 |
E119—2012A | Standard Test Methods for Fire Tests of Building Construction and Materials | 703.2, 703.2.1, 703.2.3, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 711.3.2, 714.3.1, 714.4.1, 715.1, 716.2, Table 716.3, 716.5.6, 716.5.8.1.1, Table 716.6, 716.6.7.1, 717.5.2, 717.5.3, 717.6.1, 716.6.2.1, Table 721.1(1), 1409.10.2, 2103.1, 2603.5.1 |
E136—2012 | Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C | 703.5.1 |
E283—04 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows Curtain Walls, and Doors Under Specified Pressure Difference Across the Specimen | 202 |
E330—02 | Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference | 1409.10.2, 1709.5.2 |
E331—00 (2009) | Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform Static Air Pressure Difference | 1403.2 |
E492—09 | Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine | 1207.3 |
E605—93 (2011) | Test Method for Thickness and Density of Sprayed Fire-resistive Material (SFRM) Applied to Structural Members | 1705.14.4.1, 1705.14.4.2, 1705.14.4.5, 1705.14.5 |
E681—2009 | Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases | 202 |
E736—00 (2011) | Test Method for Cohesion/Adhesion of Sprayed Fire-resistive Materials Applied to Structural Members | 704.13.2, 1705.14.6 |
E814—2013 | Test Method of Fire Tests of Through-penetration Firestops | 202, 714.3.1.2, 714.3.2, 7143.4.1.1.2 |
E970—2010 | Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source | 720.3.1 |
E1300—12AE1 | Practice for Determining Load Resistance of Glass in Buildings | 2404.1, 2404.2, 2404.3.1, 2404.3.2, 2404.3.3, 2404.3.4, 2404.3.5 |
E1354—2013 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | 424.2 |
E1592—05(2012) | Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference | 1504.3.2 |
E1602—02(2010)E1 | Guide for Construction of Solid Fuel-burning Masonry Heaters | 2112.2 |
E1886—05 | Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Missiles and Exposed to Cyclic Pressure Differentials | 1609.1.2 |
E1966—07A(2011) | Test Method for Fire-resistant Joint Systems | 202, 715.3 |
E1996—2012A | Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes | 1609.1.2, 1609.1.2.2 |
E2072—10 | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings | 1025.3 |
E2174—10AE1 | Standard Practice for On-Site Inspection of Installed Fire Stops | 1705.17.1 |
E2178—13 | Standard Test Method for Air Permeance of Building Materials | 202 |
E2273—03(2011) | Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies | 1408.4.1 |
E2307—2010 | Standard Test Method for Determining Fire-Resistance of a Perimeter Joint System Between an Exterior Wall Assembly and Floor Assembly Using the Intermediate-scale, Multistory Test Apparatus | 715.4 |
E2393—10A | Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barrier | 1705.17.2 |
E2397—11 | Standard Practice for Determination of Dead Loads and Live Loads Associated with Green Roof Systems | 1607.12.3.1 |
E2404—2013E1 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics | 803.1.4 |
E2556—10 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment | 1404.2, 2510.6 |
E2568—09e1 | Standard Specification for PB Exterior Insulation and Finish Systems | 1408.2 |
E2570—07 | Standard Test Method for Evaluating Water-resistive Barrier (WRB) Coatings Used Under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage | 1408.4.1.1, 1705.16.1 |
E2573—12 | Standard Practice for Specimen Preparation and Mounting of Site-fabricated Stretch Systems to Assess Surface Burning Characteristics | 803.13 |
E2599—11 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics | 2614.3 |
E2634—11 | Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems | 1903.4 |
E2751—11 | Standard Practice for Design and Performance of Supported Glass Walkways | 2409.1 |
F547—(2012) | Terminology of Nails for Use with Wood and Wood-based Materials | Table 2506.2 |
F1667—11AE1 | Specification for Driven Fasteners: Nails, Spikes and Staples | Table 721.1(2), Table 721.1(3), 1507.2.6, 1507.17.5, 2303.6, Table 2506.2 |
F2006—00 (2005) 10 | Standard/Safety Specification for Window Fall Prevention Devices for Nonemergency Escape (Egress) and Rescue (Ingress) Windows | 1015.8 |
F2090—10 | Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms | 1015.8, 1015.8.1 |
F2200—2013 | Standard Specification for Automated Vehicular Gate Construction | 3110.3 |
G152—06 | Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials | 1504.6 |
G154—06 | Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials | 1504.6 |
G155—05a | Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials | 1504.6 |
AWC | American Wood Council 222 Catoctin SE, Suite 201 Leesburg, VA 20175 | |
Standard reference number | Title | Referenced in code section number |
AWC WCD No. 4—2003 | Wood Construction Data—Plank and Beam Framing for Residential Buildings | 2306.1.2 |
AWC WFCM—2015 | Wood Frame Construction Manual for One- and Two-Family Dwellings | 1609.1.1, 1609.1.1.1, 2301.2, 2308.2.4, 2309.1 |
ANSI/AWC NDS—2015 | National Design Specification (NDS) for Wood Construction with 2015 NDS Supplement | 202, 722.1, Table 1604.3, 1809.12, 1810.3.2.4, Table 1810.3.2.6, 1905.1.8, 2304.13, 2306.1, Table 2306.2(1), Table 2306.2(2), Table 2306.3(1), Table 2306.3(2), 2307.1 |
AWC STJR—2015 | Span Tables for Joists and Rafters | 2306.1.1, 2308.4.2.1, 2308.7.1, 2308.7.2 |
ANSI/AWC PWF—2015 | Permanent Wood Foundation Design Specification | 1805.2, 1807.1.4, 2304.10.5.2 |
AWC SDPWS—2015 | Special Design Provisions for Wind and Seismic | 202, 2305.1, 2305.2, 2305.3, 2306.1, 2306.2, 2306.3, Table 2306.3(1), Table 2306.3(3), 2307.1 |
AWCI | Association of the Wall and Ceiling Industry 513 West Broad Street, Suite 210 Falls Church, VA 22046 | |
Standard reference number | Title | Referenced in code section number |
12-B—04 | Technical Manual 12-B Standard Practice for the Testing and Inspection of Field Applied Thin Film Intumescent Fire-resistive Materials; an Annotated Guide, Second Edition | 1705.15 |
AWPA | American Wood Protection Association P.O. Box 361784 Birmingham, AL 35236-1784 | |
Standard reference number | Title | Referenced in code section number |
C1—03 | All Timber Products-Preservative Treatment by Pressure Processes | 1505.6 |
M4—11 | Standard for the Care of Preservative-treated Wood Products | 1810.3.2.4.1, 2303.1.9 |
U1—14 | USE CATEGORY SYSTEM: User Specification for Treated Wood Except Section 6, Commodity Specification H | 1403.6, Table 1507.9.6, 1807.1.4, 1807.3.1, 1809.12, 1810.3.2.4.1, 2303.1.9, 2304.12.1, 2304.12.2, 2304.12.3, 2304.2.4, 2304.12.5 |
AWS | American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 | |
Standard reference number | Title | Referenced in code section number |
D1.4/D1.4M—2011 | Structural Welding Code-Reinforcing Steel Including Metal Inserts and Connections In Reinforced Concrete Construction | 1704.5, 1705.3.1, Table 1705.3, 2107.4 |
BHMA | Builders Hardware Manufacturers' Association 355 Lexington Avenue, 17th Floor New York, NY 10017-6603 | |
Standard reference number | Title | Referenced in code section number |
A 156.10—2011 | Power Operated Pedestrian Doors | 1010.1.4.2 |
A 156.19—2013 | Standard for Power Assist and Low Energy Operated Doors | 1010.1.4.2 |
A 156.27—11 | Power and Manual Operated Revolving Pedestrian Doors | 1010.1.4.1 |
CEN | European Committee for Standardization (CEN) Central Secretariat Rue de Stassart 36 B-10 50 Brussels | |
Standard reference number | Title | Referenced in code section number |
EN 1081—98 | Resilient Floor Coverings—Determination of the Electrical Resistance | 406.7.1 |
BS EN 15250—2007 | Slow Heat Release Appliances Fired By Solid Fuel Requirements and Test Methods | 2112.2, 2112.5 |
CGSB | Canadian General Standards Board Place du Portage 111, 6B1 11 Laurier Street Gatineau, Quebec, Canada KIA 1G6 | |
Standard reference number | Title | Referenced in code section number |
37-GP-52M (1984) | Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric | 1504.7, 1507.12.2 |
37-GP-56M (1980) | Membrane, Modified, Bituminous, Prefabricated and Reinforced for Roofing—with December 1985 Amendment | 1507.11.2 |
CAN/CGSB 37.54—95 | Polyvinyl Chloride Roofing and Waterproofing Membrane | 1507.13.2 |
CPA | Composite Panel Association 19465 Deerfield Avenue, Suite 306 Leesburg, VA 20176 | |
Standard reference number | Title | Referenced in code section number |
ANSI A135.4—2012 | Basic Hardboard | 1404.3.1, 2303.1.7 |
ANSI A135.5—2012 | Prefinished Hardboard Paneling | 2303.1.7, 2304.7 |
ANSI A135.6—2012 | Engineered Wood Siding | 1404.3.2, 2303.1.7 |
A208.1—09 | Particleboard | 2303.1 8, 2303.1. 8.1 |
CPSC | Consumer Product Safety Commission 4330 East West Highway Bethesda, MD 20814-4408 | |
Standard reference number | Title | Referenced in code section number |
16 CFR Part 1201 (2002) | Safety Standard for Architectural Glazing Material | 2406.2, Table 2406.2(1), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3.1, 2409.4.1 |
16 CFR Part 1209 (2002) | Interim Safety Standard for Cellulose Insulation | 720.6 |
16 CFR Part 1404 (2002) | Cellulose Insulation | 720.6 |
16 CFR Part 1500 (2009) | Hazardous Substances and Articles; Administration and Enforcement Regulations | 202 |
16 CFR Part 1500.44(2009) | Method for Determining Extremely Flammable and Flammable Solids | 202 |
16 CFR Part 1507 (2002) | Fireworks Devices | 202 |
16 CFR Part 1630 (2007) | Standard for the Surface Flammability of Carpets and Rugs | 804.4.1 |
CSA | Canadian Standards Association 8501 East Pleasant Valley Cleveland, OH 44131-5516 | |
Standard reference number | Title | Referenced in code section number |
AAMA/WDMA/CSA 101/I.S.2/A440—11 | Specifications for Windows, Doors and Unit Skylights | 1709.5.1, 2405.5 |
CSSB | Cedar Shake and Shingle Bureau P. O. Box 1178 Sumas, WA 98295-1178 | |
Standard reference number | Title | Referenced in code section number |
CSSB—97 | Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau | Table 1507.8.5, Table 1507.9.6 |
DASMA | Door and Access Systems Manufacturers Association International 1300 Summer Avenue Cleveland, OH 44115-2851 | |
Standard reference number | Title | Referenced in code section number |
ANSI/DASMA 107—1997 (R2012) | Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation | 2603.4.1.9 |
108—12 | Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference | 1709.5.2 |
115—12 | Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure | 1609.1.2.3 |
DOC | U.S. Department of Commerce National Institute of Standards and Technology 1401 Constitution Avenue NW Washington, DC 20230 | |
Standard reference number | Title | Referenced in code section number |
PS-1—09 | Structural Plywood | 2303.1.5, 2304.7, Table 2304.7(4), Table 2304.7(5), Table 2306.2(1), Table 2306.2(2) |
PS-2—10 | Performance Standard for Wood-based Structural-use Panels | 2303.1.5, 2304.7, Table 2304.7(5), Table 2306.2(1), Table 2306.2(2) |
PS 20—05 | American Softwood Lumber Standard | 202, 1810.3.2.4, 2303.1.1 |
DOL | U.S. Department of Labor Frances Perkins Building 200 Constitution Avenue NW Washington, DC 20210 | |
Standard reference number | Title | Referenced in code section number |
29 CFR Part 1910.1000 (2009) | Air Contaminants | 202 |
DOTn | U.S. Department of Transportation c/o Superintendent of Documents East Building, 2nd floor Washington, DC 20590 | |
Standard reference number | Title | Referenced in code section number |
49 CFR Parts 100—185 2005 | Hazardous Materials Regulations | 202 |
49 CFR Parts 173.137 (2009) | Shippers—General Requirements for Shipments and Packaging— Class 8—Assignment of Packing Group | 202 |
49 CFR—1998 | Specification of Transportation of Explosive and Other Dangerous Articles, UN 0335, UN 0336 Shipping Containers | 202 |
FEMA | Federal Emergency Management Agency Federal Center Plaza 500 C Street S.W. Washington, DC 20472 | |
Standard reference number | Title | Referenced in code section number |
FEMA-TB-11—01 | Crawlspace Construction for Buildings Located in Special Flood Hazard Areas | 1805.1.2.1 |
FM | Factory Mutual Global Research Standards Laboratories Department 1301 Atwood Avenue, P.O. Box 7500 Johnston, RI 02919 | |
Standard reference number | Title | Referenced in code section number |
4430 (2012) | Approval Standard for Heat and Smoke Vents | 910.3.1 |
4450 (1989) | Approval Standard for Class 1 Insulated Steel Deck Roofs—with Supplements through July 1992 | 1509.2 |
4470 (2012) | Approval Standard for Single-Ply Polymer-Modified Bitumen Sheet, Built-Up Roof (BUR) And Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction | 1504.7 |
4474 (2011) | American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures | 1504.3.1, 1504.3.2 |
4880-2010 | Approval Standard for Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings and Exterior Wall Systems | 2603.4, 2603.9 |
GA | Gypsum Association 6525 Belcrest Road, Suite 480 Hyattsville, MD 20782 | |
Standard reference number | Title | Referenced in code section number |
GA 216—13 | Application and Finishing of Gypsum Panel Products | Table 2508.1, 2509.2 |
GA 600—12 | Fire-Resistance Design Manual, 20th Edition | Table 721.1(1), Table 721.1(2), Table 721.1(3) |
HPVA | Hardwood Plywood Veneer Association 1825 Michael Faraday Drive Reston, VA 20190 | |
Standard reference number | Title | Referenced in code section number |
HP-1—2013 | Standard for Hardwood and Decorative Plywood | 2303.3, 2304.7 |
ISO | International Organization for Standardization ISO Central Secretariat 1 ch, de la Voie-Creuse, Case Postale 56 CH-1211 Geneva 20, Switzerland | |
Standard reference number | Title | Referenced in code section number |
ISO 8115—86 | Cotton Bales—Dimensions and Density | Table 307.1(1), Table 415.11.1.1.1 |
ISO 8336—09 | Fiber-Cement Flat Sheets - Product Specification and Test Methods | 1404.10, 1405.16.1, 1405.16.2, Table 2509.2 |
MHI | Material Handling Institute 8720 Red Oak Blvd. Suite 201 Charlotte, NC 28217 | |
Standard reference number | Title | Referenced in code section number |
ANSI MH29.1—08 | Safety Requirements for Industrial Scissors Lifts | 3001.2 |
NAAMM | National Association of Architectural Metal Manufacturers 800 Roosevelt Road, Bldg. C, Suite 312 Glen Ellyn, IL 60137 | |
Standard reference number | Title | Referenced in code section number |
FP 1001—07 | Guide Specifications for Design of Metal Flag Poles | 1609.1.1 |
NCMA | National Concrete Masonry Association 13750 Sunrise Valley Herndon, VA 22071-4662 | |
Standard reference number | Title | Referenced in code section number |
TEK 5—84 (1996) | Details for Concrete Masonry Fire Walls | Table 721.1(2) |
NFPA | National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471 | |
Standard reference number | Title | Referenced in code section number |
10—13 | Standard for Portable Fire Extinguishers | 906.2, 906.3.2, 906.3.4, Table 906.3(1), Table 906.3(2) |
11—10 | Standard for Low Expansion Foam | 904.7 |
12—11 | Standard on Carbon Dioxide Extinguishing Systems | 904.8, 904.11 |
12A—09 | Standard on Halon 1301 Fire Extinguishing Systems | 904.9 |
13—13 | Installation of Sprinkler Systems | 708.2, 903.3.1.1, 903.3.2, 903.3.8.2, 903.3.8.5 904.11, 905.3.4, 907.6.4, 1019.3 |
13D—13 | Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes | 903.3.1.3 |
13R—13 | Standard for the Installation of Sprinkler Systems in Low Rise Residential Occupancies | 903.3.1.2, 903.3.5.2, 903.4 |
14—13 | Standard for the Installation of Standpipe and Hose System | 905.2, 905.3.4, 905.4.2, 905.6.2, 905.8 |
16—15 | Standard for the Installation of Foam-water Sprinkler and Foam-water Spray Systems | 904.7, 904.11 |
17—13 | Standard for Dry Chemical Extinguishing Systems | 904.6, 904.11 |
17A—13 | Standard for Wet Chemical Extinguishing Systems | 904.5, 904.11 |
20—13 | Standard for the Installation of Stationary Pumps for Fire Protection | 913.1, 913.2.1, 913.5 |
30—12 | Flammable and Combustible Liquids Code | 415.6, 507.8.1.1.1, 507.8.1.1.2 |
31—11 | Standard for the Installation of Oil-burning Equipment | 2113.15 |
32—11 | Standard for Dry Cleaning Plants | 415.9.3 |
40—11 | Standard for the Storage and Handling of Cellulose Nitrate Film | 409.1 |
58—14 | Liquefied Petroleum Gas Code | 415.9.2 |
61—13 | Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Product Facilities | 426.1 |
70—14 | National Electrical Code | 108.3, 415.11.1.8, 904.3.1, 907.6.1, 909.12.2, 909.16.3, 1205.4.1, 2701.1, 2702.1.2, G501.4, G1001.6, H106.1, H106.2, K101, K111.1 |
72—13 | National Fire Alarm and Signaling Code | 407.4.4.3, 407.4.4.5, 407.4.4.5.1, 901.6, 903.4.1, 904.3.5, 907.2, 907.2.6, 907.2.11, 907.2.13.2, 907.3, 907.3.3, 907.3.4, 907.5.2.1.2, 907.5.2.2, 907.5.2.2.5, 907.6, 907.6.1, 907.6.2, 907.6.6, 907.7, 907.7.1, 907.7.2, 907.2.9.3, 911.1.5, 2702.2.4, 3005.5, 3007.7 |
80—13 | Standard for Fire Doors and Other Opening Protectives | 410.3.5, 509.4.2, 716.5, 716.5.7, 716.5.8.1, 716.5.9.2, 716.6, 716.6.4, 1010.1.4.3 |
82—14 | Standard on Incinerators and Waste and Linen Handling Systems and Equipment | 713.13 |
85—15 | Boiler and Combustion System Hazards Code | 415.8.1 |
92—15 | Standard for Smoke Control Systems | 909.7, 909.8 |
99—15 | Health Care Facilities Code | 407.10, 425.1 |
101—15 | Life Safety Code | 1029.6.2 |
105—13 | Standard for Smoke Door Assemblies and Other Opening Protectives | 405.4.2, 710.5.2.2, 716.5.3.1, 909.20.4.1 |
110—13 | Standard for Emergency and Standby Power Systems | 2702.1.2 |
111—13 | Standard on Stored Electrical Energy Emergency and Standby Power Systems | 2702.1.2 |
120—15 | Standard for Fire Prevention and Control in Coal Mines | 426.1 |
170—15 | Standard for Fire Safety and Emergency Symbols | 1025.2.6.1 |
211—13 | Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances | 2112.5 |
221—15 | Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls | 706.2 |
252—12 | Standard Methods of Fire Tests of Door Assemblies | 715.4.2, 715.4.3, 715.4.7.3.1, Table 716.3, 716.3.1, 716.4, 716.5.1, 716.5.3, 716.5.8, 716.5.8.1.1 |
253—15 | Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source | 406.8.3, 424.2, 804.2, 804.3 |
257—12 | Standard for Fire Test for Window and Glass Block Assemblies | Table 716.3, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.7.3 |
259—13 | Standard Test Method for Potential Heat of Building Materials | 2603.4.1.10, 2603.5.3 |
265—11 | Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings on Full Height Panels and Walls | 803.1.3, 803.1.3.1 |
268—12 | Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source | 1406.2.1.1, 1406.2.1.1.1, 1406.2.1.1.2, 2603.5.7, D105.1 |
275—13 | Standard Method of Fire Tests for the Evaluation of Thermal Barriers | 1407.10.2, 2603.4 |
276—11 | Standard Method of Fire Tests for Determining the Heat Release Rate of Roofing Assemblies With Combustible Above-Deck Roofing Components | 1508.1, 2603.3, 2603.4.1.5 |
285—12 | Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Nonload-bearing Wall Assemblies Containing Combustible Components | 718.2.6, 1403.5, 1407.10.4, 1409.10.4, 1510.6.2, 2603.5.5 |
286—15 | Standard Methods of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth | 402.6.4.4, 803.1.2, 803.1.2.1, 803.11, 2603.4, 2603.7.2, 2603.9, 2604.2.4, 2614.4 |
288—12 | Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal in Fire-resistance-rated Floor Systems | 712.1.13.1 |
289—13 | Standard Method of Fire Test for Individual Fuel Packages | 402.6.2, 424.2 |
409—11 | Standard for Aircraft Hangars | 412.4.6, Table 412.4.6, 412.4.6.1, 412.6.5 |
418—11 | Standard for Heliports | 412.8.4 |
484—15 | Standard for Combustible Metals | 426.1 |
654—13 | Standard for the Prevention of Fire & Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids | 426.1 |
655—12 | Standard for the Prevention of Sulfur Fires and Explosions | 426.1 |
664—12 | Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities | 426.1 |
701—10 | Standard Method of Fire Tests for Flame-Propagation of Textiles and Films | 410.3.6, 424.2, 801.4, 806.1, 806.3, 806.4, 3102.3, 3102.3.1, 3102.6.1.1, 3105.4, D102.2.8, H106.1.1 |
704—12 | Standard System for the Identification of the Hazards of Materials for Emergency Response | 202, 415.5.2 |
720—15 | Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment | 9151.6.1, 915.1.6.2 |
750—14 | Standard on Water Mist Fire Protection Systems | 904.12.1.1 |
1124—06 | Code for the Manufacture, Transportation and Storage of Fireworks and Pyrotechnic Articles | 415.6.1.1 |
2001—15 | Standard on Clean Agent Fire Extinguishing Systems | 904.10 |
PCI | Precast Prestressed Concrete Institute 200 West Adams Street, Suite 2100 Chicago, IL 60606-6938 | |
Standard reference number | Title | Referenced in code section number |
MNL 124—11 | Design for Fire-Resistance of Precast Prestressed Concrete | 722.2.3.1 |
MNL 128—01 | Recommended Practice for Glass Fiber Reinforced Concrete Panels | 1903.3 |
PTI | Post-Tensioning Institute 38800 Country Club Drive Farmington Hills, MI 48331 | |
Standard reference number | Title | Referenced in code section number |
PTI DC—10.5-12 | Standard Requirements for Design and Analysis of Shallow Concrete Foundations on Expansive Soils | 1808.6.2 |
RMI | Rack Manufacturers Institute 8720 Red Oak Boulevard, Suite 201 Charlotte, NC 28217 | |
Standard reference number | Title | Referenced in code section number |
ANSI/MH16.1—12 | Specification for Design, Testing and Utilization of Industrial Steel Storage Racks | 2209.1 |
SBCA | Structural Building Components Association 6300 Enterprise Lane Madison, WI 53719 | |
Standard reference number | Title | Referenced in code section number |
ANSI/FS 100-12 | Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating Sheathing Used in Exterior Wall Covering Assemblies | 2603.10 |
SDI | Steel Deck Institute P. O. Box 426 Glenshaw, PA 15116 | |
Standard reference number | Title | Referenced in code section number |
ANSI/NC1.0—10 | Standard for Noncomposite Steel Floor Deck | 2210.1.1.1 |
ANSI/RD1.0—10 | Standard for Steel Roof Deck | 2210.1.1.2 |
SDI-C—2011 | Standard for Composite Steel Floor Deck Slabs | 2210.1.1.3 |
SDI-QA/QC—2011 | Standard for Quality Control and Quality Assurance for Installation of Steel Deck | 1705.2.2 |
SJI | Steel Joist Institute 1173B London Links Drive Forest, VA 24551 | |
Standard reference number | Title | Referenced in code section number |
CJ—10 | Standard Specification for Composite Steel Joists, CJ-series | 1604.3.3, 2203.2, 2207.1 |
JG—10 | Standard Specification for Joist Girders | 1604.3.3, 2203.2, 2207.1 |
K—10 | Standard Specification for Open Web Steel Joists, K-series | 1604.3.3, 2203.2, 2207.1 |
LH/DLH—10 | Standard Specification for Longspan Steel Joists, LH-series and Deep Longspan Steel Joists, DLH-series | 1604.3.3, 2203.2, 2207.1 |
SPRI | Single-Ply Roofing Institute 411 Waverly Oaks Road, Suite 331B Waltham, MA 02452 | |
Standard reference number | Title | Referenced in code section number |
ANSI/SPRI/ FM4435-ES-1—11 | Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems | 1504.5 |
ANSI/SPRI RP-4—13 | Wind Design Guide for Ballasted Single-ply Roofing Systems | 1504.4 |
ANSI/SPRI VF1—10 | External Fire Design Standard for Vegetative Roofs | 1505.10 |
TIA | Telecommunications Industry Association 1320 N. Courthouse Road Arlington, VA 22201-3834 | |
Standard reference number | Title | Referenced in code section number |
222-G—05 | Structural Standards for Antenna Supporting Structures and Antennas, including—Addendum 1, 222-G-1, Dated 2007, Addendum 2, 222-G-2 Dated 2009 Addendum 3, 222-3 dated 2013 and Addendum 4, 222-G-4 dated 2014 | 1609.1.1, 3108.1, 3108.2 |
TMS | The Masonry Society 105 South Sunset Street, Suite Q Longmont, CO 80501 | |
Standard reference number | Title | Referenced in code section number |
216—2013 | Standard Method for Determining Fire-Resistance of Concrete and Masonry Construction Assemblies | Table 721.1(2), 722.1 |
302—2012 | Standard Method for Determining the Sound Transmission Class Rating for Masonry Walls | 1207.2.1 |
402—2013 | Building Code for Masonry Structures | 1405.6, 1405.6.1, 1405.6.2, 1405.10, 1604.3.4, 1705.4, 1705.4.1, 1807.1.6.3, 1807.1.6.3.2, 1808.9 2101.2, 2106.1, 2107.1, 2107.2, 2107.3, 2107.4, 2108.1, 2108.2, 2108.3, 2109.1, 2109.1.1, 2109.2, 2109.2.1, 2109.3, 2110.1 |
403—2013 | Direct Design Handbook for Masonry Structures | 2101.2 |
602—2013 | Specification for Masonry Structures | 1405.6.1, 1705.4, 1807.1.6.3, 2103.1, 2103.2.1, 2103.3, 2103.4, 2104.1, 2105.1 |
TPI | Truss Plate Institute 218 N. Lee Street, Suite 312 Alexandria, VA 22314 | |
Standard reference number | Title | Referenced in code section number |
TPI 1—2014 | National Design Standard for Metal-plate-connected Wood Truss Construction | 2303.4.6, 2306.1 |
UL | UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096 | |
Standard reference number | Title | Referenced in code section number |
9—2009 | Fire Tests of Window Assemblies | 715.5.2, 716.3.2, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.8.1 |
10A—2009 | Tin Clad Fire Doors | 716.5 |
10B—2008 | Fire Tests of Door Assemblies—with Revisions through April 2009 | 716.5.2 |
10C—2009 | Positive Pressure Fire Tests of Door Assemblies | 716.5.1, 716.5.3, 1010.1.10.1 |
14B—2008 | Sliding Hardware for Standard Horizontally mounted Tin Clad Fire Doors— with Revisions Through May 3, 2013 | 716.5 |
14C—06 | Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs— with Revisions through May 2013 | 716.5 |
55A—04 | Materials for Built-Up Roof Coverings | 1507.10.2 |
103—2010 | Factory-built Chimneys, for Residential Type and Building Heating Appliances— with Revisions through July 2012 | 718.2.5.1 |
127—2011 | Factory-built Fireplaces | 718.2.5.1, 2111.11 |
199E—04 | Outline of Investigation for Fire Testing of Sprinklers and Water Spray Nozzles for Protection of Deep Fat Fryers | 904.11.4.1 |
217—06 | Single and Multiple Station Smoke Alarms—with Revisions through April 2012 | 907.2.11 |
263—11 | Standard for Fire Tests of Building Construction and Materials | 703.2, 703.2.1, 703.2.3, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.7, 711.3.2, 714.3.1, 714.4.1.1, 715.1, 716.2, Table 716.3, 716.5.6, 716.5.8.1.1, 716.7.1, 717.5.2, 717.5.3, 717.6.2.1, Table 721.1(1), 1407.10.2, 2103.1, 2603.4, 2603.5.1 |
268—09 | Smoke Detectors for Fire Alarm Systems | 407.8, 907.2.6.2, 907.2.11.7 |
294—1999 | Access Control System Units—with Revisions through September 2010 | 1010.1.9.6, 1010.1.9.8, 1010.1.9.9 |
300—05(R2010) | Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment—with Revisions through July 16, 2010 | 904.11 |
300A—06 | Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces | 407.2.6, 904.13 |
305—2012 | Panic Hardware | 1010.1.10.1 |
325—02 | Door, Drapery, Gate, Louver and Window Operations and Systems— with Revisions through June 2013 | 406.3.6, 3110.4 |
555—2006 | Fire Dampers—with Revisions through May 2012 | 717.3 |
555C—2006 | Ceiling Dampers—with Revisions through May 2010 | 717.3 |
555S—99 | Smoke Dampers—with Revisions through May 2012 | 717.3, 717.3.1 |
580—2006 | Test for Uplift Resistance of Roof Assemblies— with Revisions through July 2009 | 1504.3.1, 1504.3.2 |
641—2010 | Type L Low-temperature Venting Systems—with Revisions through May 2013 | 2113.11.1.4 |
710B—2011 | Recirculating Systems | 904.11 |
723—2008 | Standard for Test for Surface Burning Characteristics of Building Materials—with Revisions through September 2010 | 202, 402.6.4.4, 406.7.2, 703.5.2, 720.1, 720.4, 803.1.1, 803.1.4, 803.10, 803.11, 806.7, 1404.12.1, 1407.9, 1407.10.1, 1409.9, 1409.10.1, 1510.6.2, 1510.6.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2603.7.1, 2603.7.2, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.4 |
790—04 | Standard Test Methods for Fire Tests of Roof Coverings— with Revisions through October 2008 | 1505.1, 2603.6, 2610.2, 2610.3 |
793—08 | Standards for Automatically Operated Roof Vents for Smoke and Heat— with Revisions through September 2011 | 406.8.5.1.1, 910.3.1 |
864—03 | Standards for Control Units and Accessories for Fire Alarm Systems— with Revisions through August 2012 | 421.6.2, 909.12 |
924—06 | Standard for Safety Emergency Lighting and Power Equipment— with Revisions through February 2011 | 1013.5 |
1040—96 | Fire Test of Insulated Wall Construction— with Revisions through October 2012 | 1407.10.3, 1409.10.3, 2603.4, 2603.9 |
1256—02 | Fire Test of Roof Deck Construction— with Revisions through January 2007 | 1508.1, 2603.3, 2603.4.1.5 |
1479—03 | Fire Tests of Through-penetration Firestops— with Revisions through October 2012 | 202, 714.3.1.2, 714.3.2, 714.4.1.2, 714.4.4 |
1482—2011 | Solid-Fuel-type Room Heaters | 2112.2, 2112.5 |
1703—02 | Flat-Plate Photovoltaic Modules and Panels— with Revisions through November 2014 | 1505.9, 1507.17.1, 1507.17.6, 1509.7.4 |
1715—97 | Fire Test of Interior Finish Material— with Revisions through January 2013 | 1407.10.3, 1409.10.2, 1409.10.3, 2603.4, 2603.9, 2614.4 |
1777—2007 | Chimney Liners—with Revisions through July 2009 | 2113.11.1, 2113.19 |
1784—01 | Air Leakage Tests of Door Assemblies— with Revisions through July 2009 | 710.5.2.2, 710.5.2.2.1, 716.5.3.1, 716.5.7.1, 716.5.7.3, 3006.3, 3007.6.3, 3008.6.3 |
1897—12 | Uplift Tests for Roof Covering Systems | 1504.3.1 |
1975—06 | Fire Test of Foamed Plastics Used for Decorative Purposes | 402.6.2, 402.6.4.5, 424.2 |
1994—04 | Luminous Egress Path Marking Systems— with Revisions through November 2010 | 411.7, 1025.2.1, 1025.2.3, 1025.2.4, 1025.4 |
2017—2008 | Standards for General-purpose Signaling Devices and Systems— with Revisions through May 2011 | 406.8.5.1.1 |
2034—2008 | Standard for Single- and Multiple-Station Carbon Monoxide Alarm— with Revisions through February 2009 | 915.4.2, 915.4.3 |
2075—2013 | Standard for Gas and Vapor Detectors and Sensors | 421.6.2, 406.8.5.1.1, 915.5.1, 915.5.3 |
2079—04 | Tests for Fire-Resistance of Building Joint Systems— with Revisions through December 2012 | 202, 715.3, 715.6 |
2196—2001 | Tests for Fire Resistive Cables—with Revisions through March 2012 | 913.2.2, 2702.3 |
2200—2012 | Stationary Engine Generator Assemblies—with Revisions through June 2013 | 2702.1.1 |
ULC | Underwriters Laboratories of Canada 7 Underwriters Road Toronto, Ontario, Canada M1R3B4 | |
Standard reference number | Title | Referenced in code section number |
CAN/ULC S 102.2—2010 | Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies—with 2000 Revisions | 720.4 |
USC | United States Code c/o Superintendent of Documents U.S. Government Printing Office 732 North Capitol Street NW Washington, DC 20401 | |
Standard reference number | Title | Referenced in code section number |
18 USC Part 1, Ch.40 | Importation, Manufacture, Distribution and Storage of Explosive Materials | 202 |
WCLIB | West Coast Lumber Inspection Bureau P. O. Box 23145 Portland, OR 97281 | |
Standard reference number | Title | Referenced in code section number |
AITC Technical Note 7—96 | Calculation of Fire-Resistance of Glued Laminated Timbers | 722.6.3.3 |
AITC 104—03 | Typical Construction Details | 2306.1 |
AITC 110—01 | Standard Appearance Grades for Structural Glued Laminated Timber | 2306.1 |
AITC 113—10 | Standard for Dimensions of Structural Glued Laminated Timber | 2306.1 |
AITC 117—10 | Standard Specifications for Structural Glued Laminated Timber of Softwood Species | 2306.1 |
AITC 119—96 | Standard Specifications for Structural Glued Laminated Timber of Hardwood Species | 2306.1 |
AITC 200—09 | Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber | 2306.1 |
WDMA | Window and Door Manufacturers Association 2025 M Street, NW Suite 800 Washington, DC 20036-3309 | |
Standard reference number | Title | Referenced in code section number |
AAMA/WDMA/CSA 101/I.S.2/A440—11 | Specifications for Windows, Doors and Unit Skylights | 1709.5.1, 2405.5 |
WRI | Wire Reinforcement Institute, Inc. 942 Main Street, Suite 300 Hartford, CT 06103 | |
Standard reference number | Title | Referenced in code section number |
WRI/CRSI—81 | Design of Slab-on-ground Foundations—with 1996 Update | 1808.6.2 |