CODES

ADOPTS WITH AMENDMENTS:

International Mechanical Code 2015 (IMC 2015)

Section 101 GENERAL

STATE AMENDMENT

101.1 Title

STATE AMENDMENT
Chapters 4101:2-1 to 4101:2-15 of the Administrative Code shall be designated as the "Ohio Mechanical Code" for which the designation "OMC" may be substituted. The "International Mechanical CodeĀ® 2015, first printing, Chapters 2 to 15," as published by the "International Code Council, Inc." is used as the basis of this document. References in these chapters to "this code" or to the "mechanical code" in other sections of the Administrative Code shall mean the "Ohio Mechanical Code".

101.2 Scope

STATE AMENDMENT
The provisions of this code shall apply to the design, installation, maintenance, alteration, repair, relocation, replacement, addition to, use and inspection of mechanical systems within buildings. This code shall also apply to those systems, system components, equipment and appliances specifically addressed herein.
For administrative and enforcement provisions of this code, refer to Sections 101.2 to 115.4 of the building code.

101.4 Referenced standards

STATE AMENDMENT
When a reference is made within the mechanical code to a federal statutory provision, an industry consensus standard, or any other technical publication, the specific date and title of the publication as well as the name and address of the promulgating agency are listed in Chapter 15 of this code. The application of the referenced standards shall be limited and as prescribed in Section 102.5 of the building code.
Resources