ADOPTS WITH AMENDMENTS:

International Building Code 2015 (IBC 2015)

Heads up: There are no amended sections in this chapter.

Chapter 35 Referenced Standards

AMENDMENT
This section has been amended at the state or city level.

3501.1 General

AMENDMENT
This section has been amended at the state or city level.
This chapter lists the standards that are referenced in various sections of the building code. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title. The application of the referenced standards shall be as specified in Section 102.5.

3501.2 Referenced Codes

AMENDMENT
This section has been amended at the state or city level.
When indicated in this code, the following codes refer to provisions in the listed chapters of the administrative code:

REFERENCED CODE OHIO ADMINISTRATIVE CODE CHAPTERS
Building Code 4101:1-1 to 4101:1-35
Energy Code 4101:1-13
Fire Code 1301:7-1 to 1301:7-7
Mechanical Code 4101:2-1 to 4101:2-15
Ohio Boiler and Pressure Vessel Rules 4101:4-1 to 4101:4-10
Ohio Elevator Code 4101:5-1 to 4101:5-3
Residential Code of Ohio for One-, Two- and Three-Family Dwellings 4101:8-1 to 4101:8-44
Plumbing Code 4101:3-1 to 4101:3-15

3501.3 Building Code Referenced Standards

AMENDMENT
This section has been amended at the state or city level.
AA Aluminum Association
1525 Wilson Boulevard, Suite 600
Arlington, VA 22209
 
Standard
reference
number
Title Referenced
in code
section number
ADM1—2015 Aluminum Design Manual: Part 1—A Specification for Aluminum Structures
ASM 35—00 Aluminum Sheet Metal Work in Building Construction (Fourth Edition)

AAMA American Architectural Manufacturers Association
1827 Waldon Office Square, Suite 550
Schaumburg, IL 60173
 
Standard
reference
number
Title Referenced
in code
section number
1402—09
AAMA/WDMA/CSA
Standard Specifications for Aluminum Siding, Soffit and Fascia
101/I.S.2/A440—11 North American Fenestration Standard/Specifications for
Windows, Doors and Skylights

ACI American Concrete Institute
38800 Country Club Drive
Farmington Hills, MI 48331
 
Standard
reference
number
Title Referenced
in code
section number
216.1—14 Code Requirements for Determining Fire Resistance of Concrete
and Masonry Construction Assemblies
318—14 Building Code Requirements for Structural Concrete
530—13 Building Code Requirements for Masonry Structures
530.1—13 Specifications for Masonry Structures
562 - 16 Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures  

AISC American Institute of Steel
Construction One East Wacker Drive, Suite 700
Chicago, IL 60601-18021
 
Standard
reference
number
Title Referenced
in code
section number
341—10 Seismic Provisions for Structural Steel Buildings
360—10 Specification for Structural Steel Buildings

AISI American Iron and Steel Institute
25 Massachusetts Avenue, NW Suite 800
Washington, DC 20001
 
Standard
reference
number
Title Referenced
in code
section number
AISI S100—12 North American Specification for the Design of Cold-formed Steel
Structural Members, 2012
AISI S110—07/
S1-09 (2012)
Standard for Seismic Design of Cold-Formed Steel Structural
Systems—Special Moment Frames, 2007 with Supplement 1, dated 2009 (Reaffirmed 2012)
AISI S200—12 North American Standard for Cold-Formed Steel Framing-General Provisions
AISI S210—07(2012) North American Standard for Cold-Formed Steel Framing-Floor and Roof System
Design (Reaffirmed 2012)
AISI S211—07/
S1-12(2012)
North American Standard for Cold-Formed Steel Framing-Wall Stud Design, 2007 including
Supplement 1, dated 2012 (Reaffirmed 2012)
AISI S212—07(2012) North American Standard for Cold-Formed Steel Framing-Header Design, 2007, (Reaffirmed 2012)
AISI S213—07/
S1-09 (2012)
North American Standard for Cold-Formed Steel Framing-Lateral
Design, with Supplement 1, dated 2009, (Reaffirmed 2012)
S214—12 North American Standard for Cold-formed Steel Framing-Truss Design, 2012
AISI S220—15 North American Standard for Cold-formed Steel Framing-Nonstructural Members
AISI S230—07/
S3-15(2015)
Standard for Cold-formed Steel Framing-Prescriptive Method for
One- and Two-family Dwellings

ALI Automotive Lift Institute
P.O. Box 85
Courtland, NY 13045
 
Standard
reference
number
Title Referenced
in code
section number
ALI ALCTV—2013 Standard for Automotive Lifts—Safety Requirements for
Construction, Testing and Validation (ANSI)

AMCA Air Movement and Control Association International
30 West University Drive
Arlington Heights, IL 60004
 
Standard
reference
number
Title Referenced
in code
section number
540—13 Test Method for Louvers Impacted by Wind Borne Debris

ANSI American National Standards Institute
25 West 43rd Street, Fourth Floor
New York, NY 10036
 
Standard
reference
number
Title Referenced
in code
section number
A13.1—2015 Scheme for the Identification of Piping Systems
A108.1A—14 Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar
A108.1B—14 Installation of Ceramic Tile, quarry Tile on a Cured Portland
Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar
A108.4—14 Installation of Ceramic Tile with Organic Adhesives or
Water-cleanable Tile-setting Epoxy Adhesive
A108.5—14 Installation of Ceramic Tile with Dry-set Portland Cement Mortar
or Latex-Portland Cement Mortar
A108.6—14 Installation of Ceramic Tile with Chemical-resistant, Water
Cleanable Tile-setting and -grouting Epoxy
A108.8—14 Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout
A108.9—14 Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout
A108.10—14 Installation of Grout in Tilework
A118.1—14 American National Standard Specifications for Dry-set Portland Cement Mortar
A118.3—14 American National Standard Specifications for
Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and
Water Cleanable Tile-setting Epoxy Adhesive
A118.4—14 American National Standard Specifications for Latex-Portland Cement Mortar
A118.5—14 American National Standard Specifications for
Chemical Resistant Furan Mortar and Grouts for Tile Installation
A118.6—14 American National Standard Specifications for Cement Grouts for Tile Installation
A118.8—14 American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout
A136.1—14 American National Standard Specifications for
Organic Adhesives for Installation of Ceramic Tile
A137.1—12 American National Standard Specifications for Ceramic Tile
ANSI/A 190.1—12 Structural Glued Laminated Timber
Z 97.1—15 Safety Glazing Materials Used in Buildings—Safety Performance
Specifications and Methods of Test

APA APA - Engineered Wood Association
7011 South 19th
Tacoma, WA 98466
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/A 190.1—12 Structural Glued Laminated Timber
ANSI/APA PRP 210—14 Standard for Performance-Rated Engineered Wood Siding
ANSI/APA PRR 410—11 Standard for Performance-Rated Engineered Wood Rim Boards
APA PDS—12 Panel Design Specification
APA PDS
Supplement 1—12
Design and Fabrication of Plywood Curved Panels (revised 2013)
APA PDS
Supplement 2—12
Design and Fabrication of Plywood-lumber Beams (revised 2013)
APA PDS
Supplement 3—12
Design and Fabrication of Plywood Stressed-skin Panels (revised 2013)
APA PDS
Supplement 4—12
Design and Fabrication of Plywood Sandwich Panels (revised 2013)
APA PDS
Supplement 5—12
Design and Fabrication of All-plywood Beams (revised 2013)
APA PRG 320—12 Standard for Performance-Rated Cross-Laminated Timber
EWS R540—13 Builders Tips: Proper Storage and Handling of Glulam Beams
EWS S475—07 Glued Laminated Beam Design Tables
EWS S560—14 Field Notching and Drilling of Glued Laminated Timber Beams
EWS T300—16 Glulam Connection Details
EWS X440—08 Product Guide-Glulam
EWS X450—01 Glulam in Residential Construction-Western Edition

APSP The Association of Pool & Spa Professionals
2111 Eisenhower A venue
Alexandria, VA 22314
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/APSP 7-2013 Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs and Catch Basins

ASABE American Society of Agricultural and Biological Engineers
2950 Niles Road
St. Joseph, MI 49085
 
Standard
reference
number
Title Referenced
in code
section number
EP 484.2 June
1998 (R2008)
Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings
EP 486.2 OCT 2012 Shallow-post and Pier Foundation Design
EP 559.1 W/Corr.1
AUG 2010
Design Requirements and Bending Properties for Mechanically
Laminated Wood Assemblies

ASCE/SEI American Society of Civil Engineers
Structural Engineering Institute
1801 Alexander Bell Drive
Reston, VA 20191-4400
 
Standard
reference
number
Title Referenced
in code
section number
5—13 Building Code Requirements for Masonry Structures
6—13 Specification for Masonry Structures
7—10 Minimum Design Loads for Buildings and Other Structures with
Supplement No. 1
8—14 Standard Specification for the Design of Cold-formed
Stainless Steel Structural Members
19—10 Structural Applications of Steel Cables for Buildings
24—14 Flood Resistant Design and Construction
29—14 Standard Calculation Methods for Structural Fire Protection
32—01 Design and Construction of Frost Protected Shallow Foundations
41-13 Seismic Evaluation and Retrofit of Existing Buildings
49—12 Wind Tunnel Testing for Buildings and Other Structures
55—10 Tensile Membrane Structures

ASHRAE American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE
Atlanta, GA 30329-2305
 
Standard
reference
number
Title Referenced
in code
section number
90.1-2010 Energy Standard for Buildings Except Low-Rise Residential Buildings (as modified in chapter 13 of this code including Addenda ap, cj, and de applicable to computer rooms and data centers and Addenda dd)

ASME American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
Standard
reference
number
Title Referenced
in code
section number
Al7.l/CSA B44-
the edition referenced
in rule 4101:5-3-01 of
the Administrative Code
Safety Code for Elevators and Escalators
Al7.7/CSA B44-
the edition referenced
in rule 4101:5-3-01 of
the Administrative Code
Performance-Based Safety Code for Elevators and Escalators
A18.1-the edition
referenced in rule
4101:5-3-01 of the
Administrative Code
Safety Standard for Platform Lifts and Stairway Chairlifts
A90.1-the edition
referenced in rule
4101:5-3-01 of the
Administrative Code
Safety Standard for Belt Manlifts
B16.18—2012 Cast Copper Alloy Solder Joint Pressure Fittings
B16.22—2013 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
B20.1—2015 Safety Standard for Conveyors and Related Equipment
B31.3—2016 Process Piping

ASSE American Society of Safety Engineers
1800 East Oakton Street
Des Plaines, IL 60018
Standard
reference
number
Title Referenced
in code
section number
ANSI/ASSE Z359.1-2007 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components,
Part of the Fall Protection Code

ASTM ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
 
Standard
reference
number
Title Referenced
in code
section number
A6/A6M—16 Standard Specification for General Requirements for Rolled Structural Steel
Bars, Plates, Shapes and Sheet
A36/A36M—14 Specification for Carbon Structural Steel
A153/A153M—16 Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware
A240/A240M—16 Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate,
Sheet and Strip for Pressure Vessels and for General Applications
A252—10 Specification for Welded and Seamless Steel Pipe Piles
A283/A283M—13 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A416/A416M—16 Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete
A463/A463M—15 Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process
A572/A572M—15 Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel
A588/A588M—15 Specification for High-strength Low-alloy Structural Steel with
50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance
A615/A615M—16 Specification for Deformed and Plain Billet-steel Bars for Concrete Reinforcement
A653/A653M—2015el Specification for Steel Sheet, Zinc-coated Galvanized or
Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process
A690/A690M—2013α Standard Specification for High-strength Low-alloy Nickel, Copper,
Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance
for Use in Marine Environments
A706/A706M—16 Specification for Low-alloy Steel Deformed and Plain Bars
for Concrete Reinforcement
A722/A722M—15 Specification for Uncoated High-strength Steel Bar for Prestressing Concrete
A755/A755M—2016el Specification for Steel Sheet, Metallic-coated by the Hot-dip
Process and Prepainted by the Coil-coating Process for
Exterior Exposed Building Products
A792/A792M—2010(2015) Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated
by the Hot-dip Process
A875/A875M—13 Standard Specification for Steel Sheet Zinc-5 percent,
Aluminum Alloy-coated by the Hot-dip Process
A924/A924M—2016el Standard Specification for General Requirements for Steel
Sheet, Metallic-coated by the Hot-dip Process
B42—2015α Specification for Seamless Copper Pipe, Standard Sizes
B43—15 Specification for Seamless Red Brass Pipe, Standard Sizes
B68—11 Specification for Seamless Copper Tube, Bright Annealed (Metric)
B88—14 Specification for Seamless Copper Water Tube
B101—12 Specification for Lead-coated Copper Sheet and Strip for
Building Construction
B209—14 Specification for Aluminum and Aluminum Alloy Steel and Plate
B251—10 Specification for General Requirements for Wrought Seamless
Copper and Copper-alloy Tube
B280—16 Specification for Seamless Copper Tube for Air Conditioning
and Refrigeration Field Service
B370—12 Specification for Copper Sheet and Strip for
Building Construction
B695—04(2009) Standard Specification for Coatings of Zinc Mechanically
Deposited on Iron and Steel Strip for Building Construction
C5—10 Specification for Quicklime for Structural Purposes
C22/C22M-00(2015) Specification for Gypsum
C27—98(2013) Specification for Classification of Fireclay and High-alumina Refractory Brick
C28/C28M—10(2015) Specification for Gypsum Plasters
C31/C31M—2015αel Practice for Making and Curing Concrete Test Specimens in the Field
C33/C33M—2016 Specification for Concrete Aggregates
C35/C35M-2001(2014) Specification for Inorganic Aggregates for Use in Gypsum Plaster
C55—2014α Specification for Concrete Building Brick
C59/C59M—00(2015) Specification for Gypsum Casting Plaster and Molding Plaster
C61/C61M—00(2015) Specification for Gypsum Keene's Cement
C62—2013α Standard Specification for Building Brick
(Solid Masonry Units Made from Clay or Shale)
C67—14 Test Methods of Sampling and Testing Brick and Structural Clay Tile
C73—14 Specification for Calcium Silicate Brick (Sand-lime Brick)
C90—16 Specification for Loadbearing Concrete Masonry Units
C91/91M-12 Specification for Masonry Cement
C94/C94M—2016α Specification for Ready-Mixed Concrete
C140/C140M-2016 Test Method Sampling and Testing Concrete Masonry Units and Related Units
C150C150M-2016el Specification for Portland Cement
C172/C172M—2014α Practice for Sampling Freshly Mixed Concrete
C199—84 (2016) Test Method for Pier Test for Refractory Mortars
C206—14 Specification for Finishing Hydrated Lime
C208—12 Specification for Cellulosic Fiber Insulating Board
C216—16 Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C270—14a Specification for Mortar for Unit Masonry
C315—07(2011) Specification for Clay Flue Liners and Chimney Pots
C317/C317M—00(2015) Specification for Gypsum Concrete
C330/C330M—2014 Specification for Lightweight Aggregates for Structural Concrete
C331/C331M—2014 Specification for Lightweight Aggregates for Concrete Masonry Units
C406/C406M—2015 Specification for Roofing Slate
C472—99(2014) Specification for Standard Test Methods for Physical Testing of
Gypsum, Gypsum Plasters and Gypsum Concrete
C473—15 Test Method for Physical Testing of Gypsum Panel Products
C474—13 Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M—15 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C514—042014) Specification for Nails for the Application of Gypsum Board
C516—08(2013)el Specifications for Vermiculite Loose Fill Thermal Insulation
C547—15 Specification for Mineral Fiber Pipe Insulation
C549—06(2012) Specification for Perlite Loose Fill Insulation
C552—16α Standard Specification for Cellular Glass Thermal Insulation
C557—03(2009)e01 Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C578—15b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C587—04(2014) Specification for Gypsum Veneer Plaster
C595/C595M—16 Specification for Blended Hydraulic Cements
C631—09(2014) Specification for Bonding Compounds for Interior Gypsum Plastering
C635/C635M—13 Specification for the Manufacture, Performance and Testing of
Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M—13 Practice for Installation of Metal Ceiling Suspension
Systems for Acoustical Tile and Lay-in Panels
C645—14el Specification for Nonstructural Steel Framing Members
C652—15 Specification for Hollow Brick (Hollow Masonry
Units Made from Clay or Shale)
C726—12 Standard Specification for Mineral Roof Insulation Board
C728—05(2016) Standard Specification for Perlite Thermal Insulation Board
C744—16 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C754—15 Specification for Installation of Steel Framing Members
to Receive Screw-attached Gypsum Panel Products
C836/C836M—15 Specification for High-solids Content, Cold Liquid-applied
Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C840—13 Specification for Application and Finishing of Gypsum Board
C841—03(2013) Specification for Installation of Interior Lathing and Furring
C842—05(2015) Specification for Application of Interior Gypsum Plaster
C843—99 (2012) Specification for Application of Gypsum Veneer Plaster
C844—04(2015) Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C847—14α Specification for Metal Lath
C887—0513 Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar
C897—15 Specification for Aggregate for Job-Mixed Portland Cement-based Plaster
C920—14α Standard for Specification for Elastomeric Joint Sealants
C926—16α Specification for Application of Portland Cement-based Plaster
C932—06(2013) Specification for Surface-applied Bonding Compounds for Exterior Plastering
C933—14 Specification for Welded Wire Lath
C946—10 Specification for Construction of Dry-stacked, Surface-bonded Walls
C954—15 Specification for Steel Drill Screws for the Application of Gypsum Panel Products
or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm)
to 0.112 inch (2.84 mm) in Thickness
C955—15el Standard Specification for Load-bearing Transverse and Axial Steel Studs,
Runners Tracks, and Bracing or Bridging, for Screw Application of
Gypsum Panel Products and Metal Plaster Bases
C956—04(2015) Specification for Installation of Cast-in-place Reinforced Gypsum Concrete
C957/C957M-15 Specification for High-solids Content, Cold Liquid-applied
Elastomeric Waterproofing Membrane with Integral Wearing Surface
C1002—14 Specification for Steel Self-piercing Tapping Screws for the Application of
Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1007—11a(2015) Specification for Installation of Load Bearing (Transverse and
Axial) Steel Studs and Related Accessories
C1029—15 Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation
C1032—14 Specification for Woven Wire Plaster Base
C1047—14α Specification for Accessories for Gypsum
Wallboard and Gypsum Veneer Base
C1063—16α Specification for Installation of Lathing and Furring to Receive
Interior and Exterior Portland Cement-based Plaster
C1088—14 Specification for Thin Veneer Brick Units Made from Clay or Shale
C1157/C1157M—11 Standard Performance Specification for Hydraulic Cement
C1167—11 Specification for Clay Roof Tiles
C1177/C1177M—13 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M—13 Specification for Coated Mat Water-resistant Gypsum Backing Panel
C1186—08(2012) Specification for Flat Fiber Cement Sheets
C1261—13 Specification for Firebox Brick for Residential Fireplaces
C1278M—07a(2015) Specification for Fiber-reinforced Gypsum Panels
C1280—13 Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
C1283—15 Practice for Installing Clay Flue Lining
C1288—14 Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets
C1289—16 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1313/C1313M—13 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1325—14 Standard Specification for Nonasbestos Fiber-mat Reinforced Cement Backer Units
C1328/C1328M—12 Specification for Plastic (Stucco Cement)
C1364—16 Standard Specification for Architectural Cast Stone
C1386—07 Specification for Precast Autoclaved Aerated
Concrete (AAC) Wall Construction Units
C1396M/C1396M—14 Specification for Gypsum Board
C1492—03(2009) Standard Specification for Concrete Roof Tile
C1600/C 1600M—11 Standard Specification for Rapid Hardening Hydraulic Cement
C1629/
C1629M—15
Standard Classification for Abuse-resistant Nondecorated
Interior Gypsum Panel Products and Fiber-reinforced Cement Panels
C1658/C1658M—13 Standard Specification for Glass Mat Gypsum Panels
D25—12 Specification for Round Timber Piles
D41—16 Specification for Asphalt Primer
Used in Roofing, Dampproofing and Waterproofing
D43—12 Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing
D56—16 Test Method for Flash Point By Tag Closed Tester
D86—16 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D93—16 Test Method for Flash Point By Pensky-Martens Closed Cup Tester
D225—07 Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules
D226/D226M—11 Specification for Asphalt-saturated Organic Felt
Used in Roofing and Waterproofing
D227/D227M—
03(2011)E1
Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing
D312—16 Specification for Asphalt Used in Roofing
D422—63 (2007) Test Method for Particle-size Analysis of Soils
D448—12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
D450—13 Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing
D635—14 Test Method for Rate of Burning and/or Extent and
Time of Burning of Plastics in a Horizontal Position
D1143/D1143M—13 Test Method for Piles Under Static Axial Compressive Load
D1227—13 Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
D1557—12el Test Method for Laboratory Compaction Characteristics
of Soil Using Modified Effort [56,000 ft-lb/ft3 (2,700 KN m/m3)]
D1863/D1863M—
05(2011)E1
Specification for Mineral Aggregate Used on Built-up Roofs
D1929—16 Test Method for Determining Ignition Temperature of Plastics
D1970/D1970M—2015 Specification for Self-adhering Polymer Modified
Bituminous Sheet Materials Used as Steep Roof
Underlayment for Ice Dam Protection
D2178—15 Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
D2487—2011 Practice for Classification of Soils for Engineering
Purposes (Unified Soil Classification System)
D2626/D2626M—
04(2012)E1
Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing
D2822/
D2822M-05(2011)E1
Specification for Asphalt Roof Cement, Asbestos Containing
D2823/D2823M—
05(2011)E1
Specification for Asphalt Roof Coatings, Asbestos Containing
D2824—13 Standard Specification for Aluminum-Pigmented Asphalt Roof Coating,
Nonfibered, Asbestos Fibered and Fibered without Asbestos
D2843—16 Test for Density of Smoke from the Burning or Decomposition of Plastics
D2859—16 Standard Test Method for Ignition Characteristics of Finished
Textile Floor Covering Materials
D2898—10 Test Methods for Accelerated Weathering of Fire-retardant-treated
Wood for Fire Testing
D3019—08 Specification for Lap Cement Used with Asphalt Roll Roofing,
Nonfibered, Asbestos Fibered and Nonasbestos Fibered
D3161/D3161M—16 Test Method for a Wind Resistance of Asphalt Shingles
(Fan Induced Method)
D3200—74 (2012) Standard Specification and Test Method for Establishing Recommended
Design Stresses for Round Timber Construction Poles
D3201—2013 Test Method for Hygroscopic Properties of Fire-retardant-treated
Wood and Wood-based Products
D3278—1996 (2011) Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus
D3462/D3462M—16 Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D3468—13 Specification for Liquid-applied Neoprene and
Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
D3679—13 Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
D3689—2013E1 Test Methods for Deep Foundations Under Static Axial Tensile Load
D3737—2012 Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
D3746—15 Test Method for Impact Resistance of Bituminous Roofing Systems
D3747—79 (2007) Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
D3909/
D3909M—14
Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
D3957—15 Standard Practices for Establishing Stress Grades
for Structural Members Used in Log Buildings
D4022/D4022M—
2007(2012)E1
Specification for Coal Tar Roof Cement, Asbestos Containing
D4272—15 Test Method for Total Energy Impact of Plastic Films by Dart Drop
D4318—10el Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils
D4434/D4434M—15 Specification for Poly (Vinyl Chloride) Sheet Roofing
D4479/D4479M—
07(2012)E1
Specification for Asphalt Roof Coatings-Asbestos-free
D4586/D4586M—
07(2012)E1
Specification for Asphalt Roof Cement-Asbestos-free
D4601/D4601M—
04(2012)E1
Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing
D4637/D4637M—13 Specification for EPDM Sheet Used in Single-ply Roof Membrane
D4829—11 Test Method for Expansion Index of Soils
D4869/D4869M—16 Specification for Asphalt-saturated (Organic Felt)
Underlayment Used in Steep Slope Roofing
D4897/D4897M—16 Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing
D4945—12 Test Method for High-strain Dynamic Testing of Piles
D4990—13 Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
D5019—07a Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane
D5055—16 Specification for Establishing and Monitoring Structural
Capacities of Prefabricated Wood I-joists
D5456—14 Specification for Evaluation of Structural Composite Lumber Products
D5516—09 Test Method of Evaluating the Flexural Properties of Fire-retardant-treated
Softwood Plywood Exposed to the Elevated Temperatures
D5643/D5643M—
06(2012)E1
Specification for Coal Tar Roof Cement, Asbestos-free
D5664—10 Test Methods for Evaluating the Effects of Fire-retardant Treatment and
Elevated Temperatures on Strength Properties of Fire-retardant-treated Lumber
D5665—14 Specification for Thermoplastic Fabrics Used in Cold-applied
Roofing and Waterproofing
D5726—13 Specification for Thermoplastic Fabrics Used in Hot-applied
Roofing and Waterproofing
D6083—05e01 Specification for Liquid Applied Acrylic Coating Used in Roofing
D6162—15 Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous
Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6163—15 Specification for Styrene-butadiene-styrene (SBS) Modified
Bituminous Sheet Materials Using Glass Fiber Reinforcements
D6164/D6164M—11 Specification for Styrene-butadiene-styrene (SBS) Modified
Bituminous Sheet Metal Materials Using Polyester Reinforcements
D6222/D6222M—11 Specification for Atactic Polypropylene (APP) Modified
Bituminous Sheet Materials Using Polyester Reinforcements
D6223/D6223M—
02(2011)E1
Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet
Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6298—13 Specification for Fiberglass Reinforced Styrene-butadiene-styrene
(SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
D6305—15 Practice for Calculating Bending Strength Design Adjustment
Factors for Fire-retardant-treated Plywood Roof Sheathing
D6380—13 Standard Specification for Asphalt Roll Roofing (Organic) Felt
D6509/D6509M—15 Standard Specification for Atactic Polypropylene (APP)
Modified Bituminous base Sheet Materials Using Glass Fiber Reinforcements
D6694—15 Standard Specification for Liquid-applied Silicone Coating
Used in Spray Polyurethane Foam Roofing Systems
D6754/D6745M—15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
D6757—16 Standard Specification for Underlayment for Use with Steep Slope Roofing
D6841—16 Standard Practice for Calculating Design Value Treatment
Adjustment Factors for Fire-retardant-treated Lumber
D6878/D6878M—13 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
D6947—16 Standard Specification for Liquid Applied Moisture Cured
Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
D7032—15 Standard Specification for Establishing Performance Ratings for Wood,
Plastic Composite Deck Boards and Guardrail Systems (Guards or Rails)
D7147—11 Specification for Testing and Establishing Allowable Loads of Joist Hangers
D7158/D7158M—16 Standard Test Method for Wind Resistance of Sealed
Asphalt Shingles (Uplift Force/Uplift Resistance Method)
D7254—15 Standard Specification for polypropylene (PP) siding
D7655—12 Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems
D7672—14 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
E84—16 Test Methods for Surface Burning Characteristics of Building Materials
E90—09 Test Method for Laboratory Measurement of Airborne Sound
Transmission Loss of Building Partitions and Elements
E96/E96M—16 Test Method for Water Vapor Transmission of Materials
E108—2011 Test Methods for Fire Tests of Roof Coverings
E119—16 Standard Test Methods for Fire Tests of Building Construction and Materials
E136—2012 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
E283—12 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows
Curtain Walls, and Doors Under Specified Pressure Difference Across the Specimen
E330—14 Test Method for Structural Performance of Exterior Windows, Curtain Walls and
Doors by Uniform Static Air Pressure Difference
E331—16 Test Method for Water Penetration of Exterior Windows, Skylights,
Doors and Curtain Walls by Uniform Static Air Pressure Difference
E492—16 Test Method for Laboratory Measurement of Impact Sound Transmission Through
Floor-ceiling Assemblies Using the Tapping Machine
E605—15 Test Method for Thickness and Density of Sprayed
Fire-resistive Material (SFRM) Applied to Structural Members
E681—15 Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases
E736—15 Test Method for Cohesion/Adhesion of Sprayed Fire-resistive
Materials Applied to Structural Members
E814—2013 Test Method of Fire Tests of Through-penetration Firestops
E970—14 Test Method for Critical Radiant Flux of Exposed Attic
Floor Insulation Using a Radiant Heat Energy Source
E1300—16 Practice for Determining Load Resistance of Glass in Buildings
E1354—2016 Standard Test Method for Heat and Visible Smoke Release Rates for
Materials and Products Using an Oxygen Consumption Calorimeter
E1592—05(2012) Test Method for Structural Performance of Sheet Metal Roof and Siding Systems
by Uniform Static Air Pressure Difference
E1602—02(2010)E1 Guide for Construction of Solid Fuel-burning Masonry Heaters
E1886—05 Test Method for Performance of Exterior Windows, Curtain Walls, Doors and
Storm Shutters Impacted by Missiles and Exposed to Cyclic Pressure Differentials
E1966—15 Test Method for Fire-resistant Joint Systems
E1996—14 Specification for Performance of Exterior Windows, Curtain Walls,
Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E2072—14 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
E2174—14 Standard Practice for On-Site Inspection of Installed Fire Stops
E2178—13 Standard Test Method for Air Permeance of Building Materials
E2273—03(2011) Standard Test Method for Determining the Drainage Efficiency of
Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2307—15 Standard Test Method for Determining Fire Resistance of
a Perimeter Joint System Between an Exterior Wall Assembly and
Floor Assembly Using the Intermediate-scale, Multistory Test Apparatus
E2393—15 Standard Practice for On-Site Inspection of Installed
Fire Resistive Joint Systems and Perimeter Fire Barrier
E2397—15 Standard Practice for Determination of Dead Loads and Live Loads Associated
with Green Roof Systems
E2404—15 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or
Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
E2556—10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers
Intended for Mechanical Attachment
E2568—09e1 Standard Specification for PB Exterior Insulation and Finish Systems
E2570—14 Standard Test Method for Evaluating Water-resistive Barrier (WRB)
Coatings Used Under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage
E2573—12 Standard Practice for Specimen Preparation and Mounting of Site-fabricated
Stretch Systems to Assess Surface Burning Characteristics
E2599—16 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation
Materials and Vinyl Stretch Ceiling Materials for Building Applications to
Assess Surface Burning Characteristics
E2634—15 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
E2751—13 Standard Practice for Design and Performance of Supported Glass Walkways
F547—(2012) Terminology of Nails for Use with Wood and Wood-based Materials
F1346-91 (2010) Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
F1667—15 Specification for Driven Fasteners: Nails, Spikes and Staples
F2006—10 Standard/Safety Specification for Window Fall Prevention Devices for
Nonemergency Escape (Egress) and Rescue (Ingress) Windows
F2090—13 Specification for Window Fall Prevention Devices with Emergency
Escape (Egress) Release Mechanisms
F2200—2014 Standard Specification for Automated Vehicular Gate Construction
G152—13 Practice for Operating Open Flame Carbon Arc Light Apparatus for
Exposure of Nonmetallic Materials
G154—12 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
G155—13 Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials  

AWC American Wood Council
222 Catoctin SE, Suite 201
Leesburg, VA 20175
 
Standard
reference
number
Title Referenced
in code
section number
AWC WCD No. 4—2003 Wood Construction Data—Plank and Beam Framing for Residential Buildings
AWC WFCM—2015 Wood Frame Construction Manual for One- and Two-Family Dwellings
ANSI/AWC NDS—2015 National Design Specification (NDS) for
Wood Construction with 2015 NDS Supplement
AWC STJR—2015 Span Tables for Joists and Rafters
ANSI/AWC PWF—2015 Permanent Wood Foundation Design Specification
AWC SDPWS—2015 Special Design Provisions for Wind and Seismic

AWCI Association of the Wall and Ceiling Industry
513 West Broad Street, Suite 210
Falls Church, VA 22046
 
Standard
reference
number
Title Referenced
in code
section number
12-B—14 Technical Manual 12-B Standard Practice for the Testing and Inspection of
Field Applied Thin Film Intumescent Fire-resistive
Materials; an Annotated Guide, Second Edition

AWPA American Wood Protection Association
P.O. Box 361784
Birmingham, AL 35236-1784
 
Standard
reference
number
Title Referenced
in code
section number
C1—03 All Timber Products-Preservative Treatment by Pressure Processes
M4—15 Standard for the Care of Preservative-treated Wood Products
U1—16 USE CATEGORY SYSTEM: User Specification for Treated Wood
Except Section 6, Commodity Specification H

AWS American Welding Society
8669 NW 36 Street, #130
Doral, FL 33166
 
Standard
reference
number
Title Referenced
in code
section number
D1.4/D1.4M—2011 Structural Welding Code-Reinforcing Steel Including Metal Inserts and
Connections In Reinforced Concrete Construction

BHMA Builders Hardware Manufacturers' Association
355 Lexington Avenue, 17th Floor
New York, NY 10017-6603
 
Standard
reference
number
Title Referenced
in code
section number
A 156.10—2011 Power Operated Pedestrian Doors
A 156.19—2013 Standard for Power Assist and Low Energy Operated Doors
A 156.27—11 Power and Manual Operated Revolving Pedestrian Doors

CEN European Committee for Standardization (CEN)
Central Secretariat
Rue de Stassart 36
B-10 50 Brussels
 
Standard
reference
number
Title Referenced
in code
section number
EN 1081—98 Resilient Floor Coverings—Determination of the Electrical Resistance
BS EN 15250—2007 Slow Heat Release Appliances Fired By Solid Fuel Requirements and Test Methods

CGSB Canadian General Standards Board
Place du Portage 111, 6B1
11 Laurier Street
Gatineau, Quebec, Canada KIA 1G6
Standard
reference
number
Title Referenced
in code
section number
37-GP-52M (1984) Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric
37-GP-56M (1980) Membrane, Modified, Bituminous, Prefabricated and
Reinforced for Roofing—with December 1985 Amendment
CAN/CGSB 37.54—95 Polyvinyl Chloride Roofing and Waterproofing Membrane

CPA Composite Panel Association
19465 Deerfield Avenue, Suite 306
Leesburg, VA 20176
 
Standard
reference
number
Title Referenced
in code
section number
ANSI A135.4—2012 Basic Hardboard
ANSI A135.5—2012 Prefinished Hardboard Paneling
ANSI A135.6—2012 Engineered Wood Siding
A208.1—09 Particleboard

CPSC Consumer Product Safety Commission
4330 East West Highway
Bethesda, MD 20814-4408
 
Standard
reference
number
Title Referenced
in code
section number
16 CFR Part 1201 (2002) Safety Standard for Architectural Glazing Material
16 CFR Part 1209 (2002) Interim Safety Standard for Cellulose Insulation
16 CFR Part 1301 (1977) Ban of Unstable Refuse Bins
16 CFR Part 1404 (2002) Cellulose Insulation
16 CFR Part 1500 (2009) Hazardous Substances and Articles; Administration and Enforcement Regulations
16 CFR Part 1500.44(2009) Method for Determining Extremely Flammable and Flammable Solids
16 CFR Part 1507 (2002) Fireworks Devices
16 CFR Part 1630 (2007) Standard for the Surface Flammability of Carpets and Rugs

CSA Canadian Standards Association
8501 East Pleasant Valley
Cleveland, OH 44131-5516
 
Standard
reference
number
Title Referenced
in code
section number
AAMA/WDMA/CSA
101/I.S.2/A440—14
Specifications for Windows, Doors and Unit Skylights

CSSB Cedar Shake and Shingle Bureau
P. O. Box 1178
Sumas, WA 98295-1178
Standard
reference
number
Title Referenced
in code
section number
CSSB—97 Grading and Packing Rules for Western Red Cedar Shakes and
Western Red Shingles of the Cedar Shake and Shingle Bureau

DASMA Door and Access Systems Manufacturers Association International
1300 Summer Avenue
Cleveland, OH 44115-2851
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/DASMA 107—1997
(R2012)
Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
108—12 Standard Method for Testing Sectional Garage Doors and
Rolling Doors: Determination of Structural Performance
Under Uniform Static Air Pressure Difference
115—12 Standard Method for Testing Sectional Garage Doors and
Rolling Doors: Determination of Structural
Performance Under Missile Impact and Cyclic Wind Pressure

DOC U.S. Department of Commerce
National Institute of Standards and Technology
1401 Constitution Avenue NW
Washington, DC 20230
 
Standard
reference
number
Title Referenced
in code
section number
PS-1—10 Structural Plywood
PS-2—14 Performance Standard for Wood-based Structural-use Panels
PS 20—15 American Softwood Lumber Standard

DOL U.S. Department of Labor
Frances Perkins Building
200 Constitution Avenue NW
Washington, DC 20210
 
Standard
reference
number
Title Referenced
in code
section number
29 CFR Part 1910.1000 (2014) Air Contaminants 202

DOTn U.S. Department of Transportation
c/o Superintendent of Documents
East Building, 2nd floor
Washington, DC 20590
 
Standard
reference
number
Title Referenced
in code
section number
49 CFR Parts 100—185 (2015) Hazardous Materials Regulations
49 CFR Parts 173.137
(2009)
Shippers—General Requirements for Shipments and Packaging—
Class 8—Assignment of Packing Group
49 CFR—1998 Specification of Transportation of Explosive and Other
Dangerous Articles, UN 0335, UN 0336 Shipping Containers

FEMA Federal Emergency Management Agency
Federal Center Plaza
500 C Street S.W.
Washington, DC 20472
 
Standard
reference
number
Title Referenced
in code
section number
44 CFR Parts 59-77 (2002) National Flood Insurance Program
FEMA-TB-11—01 Crawlspace Construction for Buildings Located in Special Flood Hazard Areas

FM Factory Mutual Global Research
Standards Laboratories Department
1301 Atwood Avenue, P.O. Box 7500
Johnston, RI 02919
 
Standard
reference
number
Title Referenced
in code
section number
4430 (2012) Approval Standard for Heat and Smoke Vents
4470 (2012) Approval Standard for Single-Ply Polymer-Modified Bitumen Sheet, Built-Up Roof (BUR)
And Liquid Applied Roof Assemblies for use in Class 1 and
Noncombustible Roof Deck Construction
4474 (2011) American National Standard for Evaluating the Simulated Wind Uplift Resistance of
Roof Assemblies Using Static Positive and/or Negative Differential Pressures
4880-2010 Approval Standard for Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels,
Interior Finish Materials or Coatings and Exterior Wall Systems

GA Gypsum Association
6525 Belcrest Road, Suite 480
Hyattsville, MD 20782
 
Standard
reference
number
Title Referenced
in code
section number
GA 216—16 Application and Finishing of Gypsum Panel Products
GA 600—15 Fire-Resistance Design Manual, 20th Edition

HPVA Hardwood Plywood Veneer Association
1825 Michael Faraday Drive
Reston, VA 20190
 
Standard
reference
number
Title Referenced
in code
section number
HP-1—2016 Standard for Hardwood and Decorative Plywood

HUD U.S. Department of Housing and Urban Development
451 7th Street, SW
Washington, DC 20410
 
Standard
reference
number
Title Referenced
in code
section number
HUD 24 CFR Part 3280 (1994) Manufactured Home Construction and Safety Standards

ICC International Code Council, Inc.
500 New Jersey Ave, NW
6th Floor
Washington, DC 20001
 
Standard
reference
number
Title Referenced
in code
section number
ICC A117.1—09 Accessible and Usable Buildings and Facilities
ICC 300—12 ICC Standard on Bleachers, Folding and Telescopic Seating and Grandstands
ICC 400—12 Standard on Design and Construction of Log Structures
ICC 500—14 ICC/NSSA Standard on the Design and Construction of Storm Shelters
ICC 600—14 Standard for Residential Construction in High-wind Regions
IEBC—15 International Existing Building Code®
IECC—12 International Energy Conservation Code® (adoption includes Chapters 2 through 5 of both the commercial provisions and the residential provisions, but only Section 101 of Chapters 1 and as further modified in Chapter 13 of this code)
IFGC—15 International Fuel Gas Code®
SBCCI SSTD 11—13 Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles

ISO International Organization for Standardization
ISO Central Secretariat
1 ch, de la Voie-Creuse, Case Postale 56
CH-1211 Geneva 20, Switzerland
 
Standard
reference
number
Title Referenced
in code
section number
ISO 8115—86 Cotton Bales—Dimensions and Density
ISO 8336—09 Fiber-Cement Flat Sheets - Product Specification and Test Methods

MHI Material Handling Institute
8720 Red Oak Blvd. Suite 201
Charlotte, NC 28217
Standard
reference
number
Title Referenced
in code
section number
ANSI MH29.1—08 Safety Requirements for Industrial Scissors Lifts

NAAMM National Association of Architectural Metal Manufacturers
800 Roosevelt Road, Bldg. C, Suite 312
Glen Ellyn, IL 60137
Standard
reference
number
Title Referenced
in code
section number
FP 1001—07 Guide Specifications for Design of Metal Flag Poles

NCMA National Concrete Masonry Association
13750 Sunrise Valley
Herndon, VA 22071-4662
Standard
reference
number
Title Referenced
in code
section number
TEK 5—84 (1996) Details for Concrete Masonry Fire Walls

NFPA National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
 
Standard
reference
number
Title Referenced
in code
section number
10—13 Standard for Portable Fire Extinguishers
11—16 Standard for Low Expansion Foam
12—15 Standard on Carbon Dioxide Extinguishing Systems
12A—15 Standard on Halon 1301 Fire Extinguishing Systems
13—16 Installation of Sprinkler Systems (including TIA 16-6, TIA 16-7, and TIA 16-8)
13D—16 Standard for the Installation of Sprinkler Systems in One- and Two-family
Dwellings and Manufactured Homes
13R—16 Standard for the Installation of Sprinkler Systems in
Low Rise Residential Occupancies
14—16 Standard for the Installation of Standpipe and Hose System
16—15 Standard for the Installation of Foam-water Sprinkler and Foam-water Spray Systems
17—17 Standard for Dry Chemical Extinguishing Systems
17A—17 Standard for Wet Chemical Extinguishing Systems
20—16 Standard for the Installation of Stationary Pumps for Fire Protection
30—15 Flammable and Combustible Liquids Code
31—16 Standard for the Installation of Oil-burning Equipment
32—16 Standard for Dry Cleaning Plants
37-15 Installation and Use of Stationary Combustion Engines and Gas Turbines
40—16 Standard for the Storage and Handling of Cellulose Nitrate Film
58—17 Liquefied Petroleum Gas Code
61—17 Standard for the Prevention of Fires and Dust Explosions in
Agricultural and Food Product Facilities
70—17 National Electrical Code
72—16 National Fire Alarm and Signaling Code
80—16 Standard for Fire Doors and Other Opening Protectives
82—14 Standard on Incinerators and Waste and Linen Handling Systems and Equipment
85—the edition referenced in rule 4101:4-3-01 of the Administrative Code Boiler and Combustion System Hazards Code
92—15 Standard for Smoke Control Systems
99—15 Health Care Facilities Code
101—15 Life Safety Code (only applies for Section 1029.6.2)
105—16 Standard for Smoke Door Assemblies and Other Opening Protectives
110—16 Standard for Emergency and Standby Power Systems
111—16 Standard on Stored Electrical Energy Emergency and Standby Power Systems
120—15 Standard for Fire Prevention and Control in Coal Mines
170—15 Standard for Fire Safety and Emergency Symbols
211—16 Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances
221—15 Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls
252—12 Standard Methods of Fire Tests of Door Assemblies
253—15 Standard Method of Test for Critical Radiant Flux of Floor Covering Systems
Using a Radiant Heat Energy Source
257—12 Standard for Fire Test for Window and Glass Block Assemblies
259—13 Standard Test Method for Potential Heat of Building Materials
265—15 Standard Methods of Fire Tests for Evaluating Room Fire Growth
Contribution of Textile Wall Coverings on Full Height Panels and Walls
268—12 Standard Test Method for Determining Ignitability of Exterior
Wall Assemblies Using a Radiant Heat Energy Source
275—13 Standard Method of Fire Tests for the Evaluation of Thermal Barriers
276—15 Standard Method of Fire Tests for Determining the Heat Release Rate of
Roofing Assemblies With Combustible Above-Deck Roofing Components
285—12 Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of
Exterior Nonload-bearing Wall Assemblies Containing Combustible Components
286—15 Standard Methods of Fire Test for Evaluating Contribution of
Wall and Ceiling Interior Finish to Room Fire Growth
288—12 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies
Installed in Horizontal in Fire-resistance-rated Floor Systems
289—13 Standard Method of Fire Test for Individual Fuel Packages
409—16 Standard for Aircraft Hangars
418—16 Standard for Heliports
484—15 Standard for Combustible Metals
654—17 Standard for the Prevention of Fire & Dust Explosions from the Manufacturing,
Processing and Handling of Combustible Particulate Solids
655—12 Standard for the Prevention of Sulfur Fires and Explosions
664—17 Standard for the Prevention of Fires and Explosions in Wood Processing and
Woodworking Facilities
701—15 Standard Method of Fire Tests for Flame-Propagation of Textiles and Films
704—17 Standard System for the Identification of the Hazards of
Materials for Emergency Response
720—15 Standard for the Installation of Carbon Monoxide (CO) Detection and
Warning Equipment
750—15 Standard on Water Mist Fire Protection Systems
2001—15 Standard on Clean Agent Fire Extinguishing Systems  
2010-15 Standard for Fixed Aerosol Fire Extinguishing Systems  

PCI Precast Prestressed Concrete Institute
200 West Adams Street, Suite 2100
Chicago, IL 60606-6938
 
Standard
reference
number
Title Referenced
in code
section number
MNL 124—11 Design for Fire Resistance of Precast Prestressed Concrete
MNL 128—01 Recommended Practice for Glass Fiber Reinforced Concrete Panels

PTI Post-Tensioning Institute
38800 Country Club Drive
Farmington Hills, MI 48331
 
Standard
reference
number
Title Referenced
in code
section number
PTI DC—10.5-12 Standard Requirements for Design and Analysis of Shallow Concrete
Foundations on Expansive Soils

RMI Rack Manufacturers Institute
8720 Red Oak Boulevard, Suite 201
Charlotte, NC 28217
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/MH16.1—12 Specification for Design, Testing and Utilization of Industrial Steel Storage Racks

SBCA Structural Building Components Association
6300 Enterprise Lane
Madison, WI 53719
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/FS 100-12 Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating
Sheathing Used in Exterior Wall Covering Assemblies

SDI Steel Deck Institute
P. O. Box 426
Glenshaw, PA 15116
Standard
reference
number
Title Referenced
in code
section number
ANSI/NC1.0—10 Standard for Noncomposite Steel Floor Deck
ANSI/RD1.0—10 Standard for Steel Roof Deck
SDI-C—2011 Standard for Composite Steel Floor Deck Slabs
SDI-QA/QC—2011 Standard for Quality Control and Quality Assurance for Installation of Steel Deck

SJI Steel Joist Institute
1173B London Links Drive
Forest, VA 24551
 
Standard
reference
number
Title Referenced
in code
section number
CJ—10 Standard Specification for Composite Steel Joists, CJ-series
JG—10 Standard Specification for Joist Girders
K—10 Standard Specification for Open Web Steel Joists, K-series
LH/DLH—10 Standard Specification for Longspan Steel Joists, LH-series
and Deep Longspan Steel Joists, DLH-series

SPRI Single-Ply Roofing Institute
411 Waverly Oaks Road, Suite 331B
Waltham, MA 02452
 
Standard
reference
number
Title Referenced
in code
section number
ANSI/SPRI/
FM4435-ES-1—11
Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems
ANSI/SPRI RP-4—13 Wind Design Guide for Ballasted Single-ply Roofing Systems
ANSI/SPRI VF1—10 External Fire Design Standard for Vegetative Roofs

TIA Telecommunications Industry Association
1320 N. Courthouse Road
Arlington, VA 22201-3834
 
Standard
reference
number
Title Referenced
in code
section number
222-G—05 Structural Standards for Antenna Supporting Structures and Antennas,
including—Addendum 1, 222-G-1, Dated 2007, Addendum 2, 222-G-2 Dated 2009
Addendum 3, 222-3 dated 2013 and Addendum 4, 222-G-4 dated 2014

TMS The Masonry Society
105 South Sunset Street, Suite Q
Longmont, CO 80501
 
Standard
reference
number
Title Referenced
in code
section number
216—2013 Standard Method for Determining Fire Resistance of Concrete
and Masonry Construction Assemblies
302—2012 Standard Method for Determining the Sound Transmission Class
Rating for Masonry Walls
402—2013 Building Code for Masonry Structures
403—2013 Direct Design Handbook for Masonry Structures
602—2013 Specification for Masonry Structures

TPI Truss Plate Institute
218 N. Lee Street, Suite 312
Alexandria, VA 22314
Standard
reference
number
Title Referenced
in code
section number
TPI 1—2014 National Design Standard for Metal-plate-connected Wood Truss Construction

UL UL LLC
333 Pfingsten Road
Northbrook, IL 60062-2096
 
Standard
reference
number
Title Referenced
in code
section number
9—2009 Fire Tests of Window Assemblies
10A—2009 Tin Clad Fire Doors
10B—2008 Fire Tests of Door Assemblies—with Revisions through April 2009
10C—2016 Positive Pressure Fire Tests of Door Assemblies
14B—2008 Sliding Hardware for Standard Horizontally mounted Tin Clad Fire Doors
with Revisions Through May 3, 2013
14C—06 Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs—
with Revisions through May 2013
55A—04 Materials for Built-Up Roof Coverings
103—2010 Factory-built Chimneys, for Residential Type and Building Heating Appliances—
with Revisions through July 2012
127—2011 Factory-built Fireplaces
199E—04 Outline of Investigation for Fire Testing of Sprinklers and
Water Spray Nozzles for Protection of Deep Fat Fryers
217—15 Single and Multiple Station Smoke Alarms—with Revisions through April 2012
263—11 Standard for Fire Tests of Building Construction and Materials
268—16 Smoke Detectors for Fire Alarm Systems
294—2013 Access Control System Units—with Revisions through September 2010
300—05(R2010) Fire Testing of Fire Extinguishing Systems for Protection of
Commercial Cooking Equipment—with Revisions through July 16, 2010
300A—06 Outline of Investigation for Extinguishing System Units for Residential Range
Top Cooking Surfaces
305—2012 Panic Hardware
325—13 Door, Drapery, Gate, Louver and Window Operations and Systems—
with Revisions through June 2013
555—2006 Fire Dampers—with Revisions through May 2012
555C—2014 Ceiling Dampers—with Revisions through May 2010
555S—14 Smoke Dampers—with Revisions through May 2012
580—2006 Test for Uplift Resistance of Roof Assemblies
with Revisions through July 2009
641—2010 Type L Low-temperature Venting Systems—with Revisions through May 2013
710B—2011 Recirculating Systems
723—2008 Standard for Test for Surface Burning Characteristics of
Building Materials—with Revisions through September 2010
790—04 Standard Test Methods for Fire Tests of Roof Coverings
with Revisions through October 2008
793—08 Standards for Automatically Operated Roof Vents for Smoke and Heat—
with Revisions through September 2011
864—14 Standards for Control Units and Accessories for Fire Alarm Systems
with Revisions through August 2012
924—16 Standard for Safety Emergency Lighting and Power Equipment—
with Revisions through February 2011
1040—96 Fire Test of Insulated Wall Construction—
with Revisions through October 2012
1256—02 Fire Test of Roof Deck Construction—
with Revisions through January 2007
1479—15 Fire Tests of Through-penetration Firestops
with Revisions through October 2012
1482—2011 Solid-Fuel-type Room Heaters
1703—02 Flat-Plate Photovoltaic Modules and Panels
with Revisions through November 2014
1715—97 Fire Test of Interior Finish Material—
with Revisions through January 2013
1777—2015 Chimney Liners—with Revisions through July 2009
1784—15 Air Leakage Tests of Door Assemblies—
with Revisions through July 2009
1897—15 Uplift Tests for Roof Covering Systems
1975—06 Fire Test of Foamed Plastics Used for Decorative Purposes
1994—15 Luminous Egress Path Marking Systems—
with Revisions through November 2010
2017—2008 Standards for General-purpose Signaling Devices and Systems—
with Revisions through May 2011
2034—2008 Standard for Single- and Multiple-Station Carbon Monoxide Alarm—
with Revisions through February 2009
2075—2013 Standard for Gas and Vapor Detectors and Sensors
2079—15 Tests for Fire Resistance of Building Joint Systems—
with Revisions through December 2012
2196—2001 Tests for Fire Resistive Cables—with Revisions through March 2012
2200—2012 Stationary Engine Generator Assemblies—with Revisions through June 2013

ULC Underwriters Laboratories of Canada
7 Underwriters Road
Toronto, Ontario, Canada M1R3B4
Standard
reference
number
Title Referenced
in code
section number
CAN/ULC S 102.2—2010 Standard Method of Test for Surface Burning Characteristics of Flooring,
Floor Coverings and Miscellaneous Materials and Assemblies—with 2000 Revisions

USC United States Code
c/o Superintendent of Documents
U.S. Government Printing Office
732 North Capitol Street NW
Washington, DC 20401
 
Standard
reference
number
Title Referenced
in code
section number
18 USC Part 1, Ch.40 Importation, Manufacture, Distribution and Storage of Explosive Materials

WCLIB West Coast Lumber Inspection Bureau
P. O. Box 23145
Portland, OR 97281
 
Standard
reference
number
Title Referenced
in code
section number
AITC Technical
Note 7—96
Calculation of Fire Resistance of Glued Laminated Timbers
AITC 104—03 Typical Construction Details
AITC 110—01 Standard Appearance Grades for Structural Glued Laminated Timber
AITC 113—10 Standard for Dimensions of Structural Glued Laminated Timber
AITC 117—10 Standard Specifications for Structural Glued Laminated Timber of Softwood Species
AITC 119—96 Standard Specifications for Structural Glued Laminated Timber of Hardwood Species
AITC 200—09 Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber

WDMA Window and Door Manufacturers Association
2025 M Street, NW Suite 800
Washington, DC 20036-3309
 
Standard
reference
number
Title Referenced
in code
section number
AAMA/WDMA/CSA
101/I.S.2/A440—11
Specifications for Windows, Doors and Unit Skylights

WRI Wire Reinforcement Institute, Inc.
942 Main Street, Suite 300
Hartford, CT 06103
 
Standard
reference
number
Title Referenced
in code
section number
WRI/CRSI—81 Design of Slab-on-ground Foundations—with 1996 Update
UpCodes Premium
Leverage the most sophisticated code compliance platform.
TRY FREE FOR TWO WEEKS VISIT PRICING