Heads up: There are no amended sections in this chapter.
Standards, or specific sections thereof, cited in this Code, including Annex, Appendixes, or Supplements where prescribed, are referenced without exception in this Code, unless specifically noted. Cited standards are listed in the following with their serial designations, including year of adoption or revision.
American Association of State Highway and Transportation Officials (AASHTO)
LRFDUS-6—LRFD Bridge Design Specifications, 6th Edition, 2012, Articles 5.10.9.6, 5.10.9.7.2, and 5.10.9.7.3
LRFDCONS-3—LRFD Bridge Construction Specifications, 3rd Edition, 2010, Article 10.3.2.3
American Concrete Institute (ACI)
301-10—Specifications for Structural Concrete, Article 4.2.3
318.2-14—Building Code Requirements for Concrete Thin Shells and Commentary
332-14—Residential Code Requirements for Structural Concrete and Commentary
355.2-07—Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary
355.4-11—Qualification of Post-Installed Adhesive Anchors in Concrete
374.1-05—Acceptance Criteria for Moment Frames Based on Structural Testing
423.7-14—Specification for Unbonded Single-Strand Tendon Materials
550.3-13—Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI 374.1 and Commentary
ITG-5.1-07—Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing
ITG-5.2-09—Requirements for Design of a Special Unbonded Post-Tensioned Precast Wall Sastifying ACI ITG-5.1 and Commentary
American Society of Civil Engineers (ASCE)
ASCE/SEI 7-10—Minimum Design Loads for Buildings and Other Structures, Sections 2.3.3, Load Combinations Including Flood Loads; and 2.3.4, Load Combinations Including Atmospheric Ice Loads
ASTM International
A36/A36M-12—Standard Specification for Carbon Structural Steel
A53/A53M-12—Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A184/A184M-06(2011)—Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A242/A242M-13—Standard Specification for High-Strength Low-Alloy Structural Steel
A307-12—Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
A370-14—Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A416/A416M-12a—Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A421/A421M-10—Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete, including Supplementary Requirement SI, Low-Relaxation Wire and Relaxation Testing
A500/A500M-13—Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501-07—Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A572/A572M-13a—Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A588/A588M-10—Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A615/A615M-14—Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A706/A706M-14—Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A722/A722M-12—Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A767/A767M-09—Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A775/A775M-07b(2014)—Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A820/A820M-11—Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A884/A884M-14—Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A934/A934M-13—Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A955/A955M-14—Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A970/A970M-13a—Standard Specification for Headed Steel Bars for Concrete Reinforcement, including Annex A1 Requirements for Class HA Head Dimensions
A992/A992M-11—Standard Specification for Structural Steel Shapes
A996/A996M-14—Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A1022/A1022M-14—Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1035/A1035M-14—Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1044/A1044M-05(2010)—Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1055/A1055M-10ε1—Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1060/A1060M-14—Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1064/A1064M-13—Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1085-13—Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
C29/C29M-09—Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
C31/C31M-12—Standard Practice for Making and Curing Concrete Test Specimens in the Field
C33/C33M-13—Standard Specification for Concrete Aggregates
C39/C39M-14a—Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C42/C42M-13—Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C94/C94M-14—Standard Specification for Ready-Mixed Concrete
C144-11—Standard Specification for Aggregate for Masonry Mortar
C150/C150M-12—Standard Specification for Portland Cement
C172/C172M-14—Standard Practice for Sampling Freshly Mixed Concrete
C173/C173M-14—Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C231/C231M-14—Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C260/C260M-10a—Standard Specification for Air-Entraining Admixtures for Concrete
C330/C330M-14—Standard Specification for Lightweight Aggregates for Structural Concrete
C494/C494M-13—Standard Specification for Chemical Admixtures for Concrete
C496/C496M-11—Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C567/C567M-14—Standard Test Method for Determining Density of Structural Lightweight Concrete
C595/C595M-14—Standard Specification for Blended Hydraulic Cements
C618-12a—Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C685/C685M-11—Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C845/C845M-12—Standard Specification for Expansive Hydraulic Cement
C989/C989M-13—Standard Specification for Slag Cement for Use in Concrete and Mortars
C1012/C1012M-13—Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1017/C1017M-13—Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1077-14—Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
C1116/C1116M-10a—Standard Specification for Fiber-Reinforced Concrete
C1157/C1157M-11—Standard Performance Specification for Hydraulic Cement
C1218/C1218M-99(2008)—Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1240-14—Standard Specification for Silica Fume Used in Cementitious Mixtures
C1580-09ε1—Standard Test for Water-Soluble Sulfate in Soil
C1582/C1582M-11—Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1602/C1602M-12—Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1609/C1609M-12—Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading)
D516-11—Standard Test Method for Sulfate Ion in Water
D4130-08—Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
American Welding Society (AWS)
D1.1/D1.1M: 2010—Structural Welding Code — Steel
D1.4/D1.4M: 2011—Structural Welding Code — Reinforcing Steel
Linked Resources
P
P Premium Feature

This feature is included in the premium subscription. Visit the feature page to learn more.

Learn More
Bookmarks
P
P Premium Feature

This feature is included in the premium subscription. Visit the feature page to learn more.

Learn More