Part I — Administration

Part II — Definitions

Part III — Building Planning and Construction

Part IV — Energy Conservation

Part V — Mechanical

Part VI — Fuel Gas

Part VII — Plumbing

Part VIII — Electrical

Part IX — Referenced Standards

Heads up: There are no amended sections in this chapter.






For SI: 1 inch = 25.4 mm, 1 degree = 0.0175 rad.

Figure 706.3 (1) COMPARISON OF DIFFERENT 11/2-INCH LONG SWEEPS FOR VARIOUS PIPING MATERIALS


 





 


For SI: 1 inch = 25.4 mm, 1 degree = 0.0175 rad.

Figure 706.3(2) COMPARISON OF DIFFERENT 3-INCH COMBINATION WYE AND EIGHTH BEND FOR VARIOUS PIPING MATERIALS


 





For SI: 1 degree = 0.0175 rad.

Figure 706.3(3)—continued DRAINAGE PATTERN FITTINGS


 





For SI: 1 degree = 0.0175 rad.

Figure 706.3 (3)—continued DRAINAGE PATTERN FITTINGS


 





Figure 706.3(4)
DIFFERENCE BETWEEN PVC PLASTIC 1/4-BEND SHORT SWEEP AND 1/4-BEND VENT

 





Figure 706.3(5) BACK-TO-BACK BLOWOUT FIXTURES


 





Figure 706.3(6) HEEL INLET FITTINGS


 





Figure 706.3(7)
COMBINATION TEES

 





Figure 706.3(8) FITTING USES


UpCodes Premium
Leverage the most sophisticated code compliance platform.
TRY FREE FOR TWO WEEKS VISIT PRICING