This chapter lists the standards that are referenced in various sections of this appendix. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of referenced standards shall be as specified in Section 102.5.

* denotes standards that are incorporated by reference to 19 NYCRR part 1227.

Margin markings have not been made in this chapter. The date of the reference standard will denote the new standards from the 2007 code.

 

ASCE American Society of Civil Engineers
1801 Alexander Bell Drive
Reston, VA 20191-4400
 
Standard
reference
number
Title  Referenced
in code
Section number
*7—05 Minimum Design Loads for Buildings and Other Structures with Supplement No. 1 A104
*31—03 Seismic Evaluation of Existing Buildings A506.1, A507.1
     
ASTM ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
 
Standard
reference
number
Title  Referenced
in code
Section number
A615/A615M—04a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement Table A505.2
C90—03 Standard Specification for Load-bearing Concrete Masonry Units A505.2.3
C496—96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens A104, A106.3.3.2
E519—07 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages A104, A106.3.3.2
     
DOC U.S. Department of Commerce
National Institute of Standards and Technology
100 Bureau Drive Stop 3460
Gaithersburg, MD 20899
 
Standard
reference
number
Title  Referenced
in code
Section number
PS 1—95 Construction and Industrial Plywood A302
PS 2—92 Performance Standard for Wood-based Structural-use Panels A302
     
ICC International Code Council
5203 Leesburg Pike, Suite 600
Falls Church, VA 22041
 
Standard
reference
number
Title  Referenced
in code
Section number
BCNYS—03 Building Code of New York State A202, A402, A502
BCNYS—10 Building Code of New York State A102.1, A102.2, A103, A104, A105.4, A108.2, A203, A204, A205.4, A206.2, A301.2, A402, A403.1, A403.3, A403.4, A403.6, A403.7, A403.8, A403.11.2.1, A403.11.2.2, A406.2, A406.3.2.1, A408.1, A505.2.3, A505.3, A508.4
  ICC—continued  
UBC-Standard 21-4 Hollow and Solid Load-bearing Concrete Masonry Units  A106.2
UBC-Standard 21-6 In-place Masonry Shear Tests A104
UBC-Standard 21-7 Tests of Anchors in Unreinforced Masonry A105.3, A107.3, A107.4, Table A1-E
UBC-Standard 21-8 Pointing of Unreinforced Masonry Walls A103, A106.3.3.9


Resources