UpCodes logo
Table of contentsContents

Chapter 35 Referenced Standards

User note:
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.4.
* Denotes standards that have been incorporated by reference into 19 NYCRR Part 1221.

AA
Aluminum Association
1400 Crystal Drive, Suite 430
Arlington, VA 22202
*ADM—2015
Aluminum Design Manual: Part 1—A Specification for Aluminum Structures
1604.3.5, 2002.1
*ASM 35—00
Aluminum Sheet Metal Work in Building Construction (Fourth Edition)
2002.1
AAMA
American Architectural Manufacturers Association
1827 Waldon Office Square, Suite 550
Schaumburg, IL 60173
711—13
Voluntary Specification for Self Adhering Flashing Used for Installation of Exterior Wall Fenestration Products
1404.4
714—15
Voluntary Specification for Liquid Applied Flashing Used to Create a Water-resistive Seal around Exterior Wall Openings in Buildings
1404.4
1402—09
Standard Specifications for Aluminum Siding, Soffit and Fascia
1403.5.1
AAMA/WDMA/CSA 101/I.S.2/A440—17
North American Fenestration Standard/Specifications for Windows, Doors and Skylights
1709.5.1, 2405.5
ACI
American Concrete Institute
38800 Country Club Drive
Farmington Hills, MI 48331
*216.1—14
Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies
Table 721.1(2), 722.1
*318—14
Building Code Requirements for Structural Concrete
722.2.4.3, 1604.3.2, 1616.2.1, 1616.3.1, 1704.5, Table 1705.3, 1705.3.2, 1808.8.2, Table 1808.8.2, 1808.8.5, 1808.8.6, 1810.1.3, 1810.2.4.1, 1810.3.2.1.1, 1810.3.2.1.2, 1810.3.8.3.1, 1810.3.8.3.3, 1810.3.9.4.2.1, 1810.3.9.4.2.2, 1810.3.10.1, 1810.3.11.1, 1810.3.12, 1901.2, 1901.3, 1902.1, 1903.1, 1904.1, 1904.2, 1905.1, 1905.1.1, 1905.1.2, 1905.1.3, 1905.1.4, 1905.1.5, 1905.1.6, 1905.1.7, 1905.1.8, 1906.1, 2108.3, 2206.1
AISC
American Institute of Steel
130 East Randolph Street, Suite 2000
Chicago, IL 60601-6219
*ANSI/AISC 341—16
Seismic Provisions for Structural Steel Buildings
1705.12.1.1, 1705.12.1.2, 1705.13.1.1, 1705.13.1.2, 2205.2.1.1, 2205.2.1.2, 2205.2.2, 2206.2.1
*ANSI/AISC 360—16
Specification for Structural Steel Buildings
722.5.2.2.1, 1604.3.3, 1705.2.1, 2202.1, 2203.1, 2205.1, 2205.2.1.1, 2206.1
AISI
American Iron and Steel Institute
25 Massachusetts Avenue, NW Suite 800
Washington, DC 20001
AISI S100—16
North American Specification for the Design of Cold-formed Steel Structural Members, 2016
1604.3.3, 1905.1.8, 2202.1, 2203.1, 2210.1, 2210.2
AISI S202—15
Code of Standard Practice for Cold-formed Steel Framing, 2015
2211.1.3.1
AISI S220—15
North American Standard for Cold-formed Steel Framing—Nonstructural Members, 2015
2202.1, 2203.1, 2211.2, Table 2506.2, Table 2507.2
AISI S230—15
Standard for Cold-formed Steel Framing—Prescriptive Method for One- and Two-family Dwellings, 2015
1609.1.1, 1609.1.1.1, 2211.1.2
AISI S240—15
North American Standard for Cold-Formed Steel Structuring Framing, 2015
1705.2.2.2, 2202.1, 2203.1, 2211.1, 2211.1.1.1, 2211.1.3.3, Table 2306.12.2, Table 2506.2, Table 2507.2, Table 2603.12.1
AISI S400—15/S1—16
North American Standard for Seismic Design of Cold-formed Steel Structural Systems, 2015, with Supplement 1, dated 2016.
2210.2, 2211.1.1.1, 2211.1.1.2
ALI
Automotive Lift Institute, Inc.
P.O. Box 85
Cortland, NY 13045
*ALI ALCTV—2011
Standard for Automotive Lifts—Safety Requirements for Construction, Testing and Validation (ANSI)
Table 3001.3
AMCA
Air Movement and Control Association International
30 West University Drive
Arlington Heights, IL 60004
540—13
Test Method for Louvers Impacted by Wind Borne Debris
1609.2.1
ANSI
American National Standards Institute
25 West 43rd Street, Fourth Floor
New York, NY 10036
A13.1—2015
Scheme for the Identification of Piping Systems
415.11.6.5
*A108.1A—99
Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar
2103.2.3
*A108.1B—99
Installation of Ceramic Tile, Quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar
2103.2.3
*A108.4—99
Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-setting Epoxy Adhesive
2103.2.3.6
*A108.5—99
Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex-Portland Cement Mortar
2103.2.3.1, 2103.2.3.2
*A108.6—99
Installation of Ceramic Tile with Chemical-resistant, Water Cleanable Tile-setting and -grouting Epoxy
2103.2.3.3
*A108.8—99
Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout
2103.2.3.4
*A108.9—99
Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout
2103.2.3.5
*A108.10—99
Installation of Grout in Tilework
2103.2.3.7
A118.1—16
American National Standard Specifications for Dry-set Portland Cement Mortar
2103.2.3.1
A118.3—13
American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive
2103.2.3.3
A118.4—16
American National Standard Specifications for Modified Dry-set Cement Mortar
2103.2.3.2, 2103.2.4
A118.5—99
American National Standard Specifications for Chemical Resistant Furan Mortar and Grouts for Tile Installation
2103.2.3.4
A118.6—10
American National Standard Specifications for Cement Grouts for Tile Installation
2103.2.3.7
A118.8—99
American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout
2103.2.3.5
A136.1—08
American National Standard Specifications for the Installation of Ceramic Tile
2103.2.3.6
A137.1—17
American National Standard Specifications for Ceramic Tile
202
Z 97.1—14
Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods of Test
2406.1.2, 2406.2, Table 2406.2(2), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1
APA
APA - Engineered Wood Association
7011 South 19th Street
Tacoma, WA 98466
ANSI 117—15
Standard Specification for Structural Glued Laminated Timber of Softwood Species
2306.1
ANSI/APA A190.1—17
Structural Glued Laminated Timber
2303.1.3, 2306.1
ANSI/APA PRP 210—14
Standard for Performance-Rated Engineered Wood Siding
2303.1.5, 2304.7, 2306.3, Table 2306.3(1)
ANSI/APA PRR 410—16
Standard for Performance-Rated Engineered Wood Rim Boards
2303.1.13
*APA PDS—12
Panel Design Specification
2306.1
*APA PDS Supplement 1—12
Design and Fabrication of Plywood Curved Panels (revised 2013)
2306.1
*APA PDS Supplement 2—12
Design and Fabrication of Plywood-lumber Beams (revised 2013)
2306.1
*APA PDS Supplement 3—12
Design and Fabrication of Plywood Stressed-skin Panels (revised 2013)
2306.1
*APA PDS Supplement 4—12
Design and Fabrication of Plywood Sandwich Panels (revised 2013)
2306.1
*APA PDS Supplement 5—16
Design and Fabrication of All-plywood Beams (revised 2013)
2306.1
ANSI/APA PRG 320—17
Standard for Performance-rated Cross-laminated Timber
2303.1.4
*APA R540—13
Builders Tips: Proper Storage and Handling of Glulam Beams
2306.1
*APA S475—16
Glued Laminated Beam Design Tables
2306.1
*APA S560—14
Field Notching and Drilling of Glued Laminated Timber Beams
2306.1
*APA T300—16
Glulam Connection Details
2306.1
*APA X440—17
Product Guide: Glulam
2306.1
APA X450—01
Glulam in Residential Construction—Western Edition
2306.1
APSP
Pool & Hot Tub Alliance
2111 Eisenhower Avenue, Suite 500
Alexandria, VA 22314
*ANSI/APSP/ICC 7—2013
American National Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs and Catch Basins
3109.4
ASABE
American Society of Agricultural and Biological Engineers
2950 Niles Road
St. Joseph, MI 49085
*EP 484.3 DEC 2017
Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings
2306.1
*EP 486.2 OCT 2012ED
Shallow-post and Pier Foundation Design
2306.1
*EP 559.1 MON2010
Design Requirements and Bending Properties for Mechanically Laminated Wood Assemblies
2306.1
ASCE/SEI
American Society of Civil Engineers
Structural Engineering Institute
1801 Alexander Bell Drive
Reston, VA 20191-4400
7—16
Minimum Design Loads and Associated Criteria for Buildings and Other Structures
202, Table 1504.1.1, Table 1504.8, 1602.1, 1604.3, Table 1604.3, 1604.5, Table 1604.5, 1604.8.2, 1604.9, 1605.1, 1605.2.1, 1605.3.1, 1605.3.1.2, 1605.3.2, 1605.3.2.1, 1607.8.1, 1607.8.1.1, 1607.8.1.2, 1607.9, 1607.13.1, 1607.13.3.1, 1608.1, 1608.2, 1608.3, 1609.1.1, 1609.2, 1609.3, 1609.5.1, 1609.5.3, 1611.2, 1612.2, 1613.1, 1613.2.2, 1613.2.3, 1613.2.5, Table 1613.2.3(1), Table 1613.2.3(2), 1613.2.5.1, 1613.2.5.2, 1613.3, 1614.1, 1615.1, 1705.12, 1705.12.1.1, 1705.12.1.2, 1705.12.4, 1705.13.1.1, 1705.13.1.2, 1705.13.2, 1705.13.3, 1705.13.4, 1709.5, 1803.5.12, 1808.3.1, 1809.13, 1810.3.6.1, 1810.3.8.3.2, 1810.3.8.3.3, 1810.3.9.4, 1810.3.11.2, 1810.3.12, 1901.2, 1905.1.1, 1905.1.2, 1905.1.7, 1905.1.8, 2205.2.1.1, 2205.2.1.2, 2205.2.2, 2206.2.1, 2209.1, 2209.2, 2210.2, 2211.1.1.1, Table 2304.6.1, Table 2306.3(3), Table 2308.7.5, 2404.1, 2505.1, 2505.2, 2506.2.1
8—02
Standard Specification for the Design of Cold-formed Stainless Steel Structural Members
1604.3.3, 2210.1, 2210.2
19—16
Structural Applications of Steel Cables for Buildings
2208.1
*24—14
Flood Resistant Design and Construction
1202.4.2, 1202.4.4, 1612.4, 1612.5, 2702.1.8, 3001.3
29—05
Standard Calculation Methods for Structural Fire Protection
722.1
32—01
Design and Construction of Frost Protected Shallow Foundations
1809.5
49—12
Wind Tunnel Testing for Buildings and Other Structures
1609.1.1
55—16
Tensile Membrane Structures
3102.2
ASME
American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
*ASME/A17.1—2016/CSA B44—16
Safety Code for Elevators and Escalators
907.3.3, 911.1.6, 1009.4.1, 1607.10.1, 3001.2, Table 3001.3, 3001.4, 3001.5, 3002.5, 3003.2, 3007.1, 3008.1.4, 3008.7.1
*A17.7—2007/CSA B44—07(R2012)
Performance-based Safety Code for Elevators and Escalators
Table 3001.3, 3001.5, 3002.5
*A18.1—2014
Safety Standard for Platform Lifts and Stairway Chairlifts
1109.8, Table 3001.3
*A90.1—2015
Safety Standard for Belt Manlifts
Table 3001.3
B16.18—2012
Cast Copper Alloy Solder Joint Pressure Fittings
909.13.1
B16.22—2013
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
909.13.1
*B20.1—2015
Safety Standard for Conveyors and Related Equipment
Table 3001.3, 3004.3
B31.3—2016
Process Piping
415.11.6
ASSE
American Society of Safety Engineers
520 N. Northwest Highway
Park Ridge, IL 60068
*ANSI/ASSE Z359.1—2007
Requirements for the ANSI/ASSE Z359 Fall Protection Code
1015.6, 1015.7
ASTM
ASTM International
100 Barr Harbor Drive, P.O. Box C700
West Conshohocken, PA 19428-2959
A6/A6M—14
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet Piling
1810.3.2.3, 1810.3.5.3.1, 1810.3.5.3.3
A36/A36M—14
Specification for Carbon Structural Steel
1810.3.2.3
A153/A153M—09
Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware
2304.10.5
A240/A240M—15a
Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications
Table 1507.4.3(1)
A252—10
Specification for Welded and Seamless Steel Pipe Piles
1810.3.2.3
A283/A283M—13
Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
1810.3.2.3
A416/A416M—15
Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete
1810.3.2.2
A463/A463M—15
Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process
Table 1507.4.3(2)
A572/A572M—15
Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel
1810.3.2.3
A588/A588M—15
Specification for High-strength Low-alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance
1810.3.2.3
A615/A615M—15ae1
Specification for Deformed and Plain Carbon-steel Bars for Concrete Reinforcement
1704.5, 1810.3.10.2
A653/A653M—15
Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process
Table 1507.4.3(1), Table 1507.4.3(2), 2304.10.5.1
A690/A690M—13a
Standard Specification for High-strength Low-alloy Nickel, Copper, Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
1810.3.2.3
A706/A706M—15
Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement
1704.5, Table 1705.3, 2107.3, 2108.3
A722/A722M—15
Specification for High-strength Steel Bars for Prestressed Concrete
1810.3.10.2
A755/A755M—15
Specification for Steel Sheet, Metallic-coated by the Hot-dip Process and Prepainted by the Coil-coating Process for Exterior Exposed Building Products
Table 1507.4.3(1), Table 1507.4.3(2)
A792/A792M—10(2015)
Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the Hot-dip Process
Table 1507.4.3(1), Table 1507.4.3(2)
A875/A875M—13
Standard Specification for Steel Sheet, Zinc-5%, Aluminum Alloy-coated by the Hot-dip Process
Table 1507.4.3(2)
A924/A924M—14
Standard Specification for General Requirements for Steel Sheet, Metallic-coated by the Hot-dip Process
Table 1507.4.3(1)
B42—2015A
Specification for Seamless Copper Pipe, Standard Sizes
909.13.1
B43—15
Specification for Seamless Red Brass Pipe, Standard Sizes
909.13.1
B68/B68M—11
Specification for Seamless Copper Tube, Bright Annealed (Metric)
909.13.1
B88—14
Specification for Seamless Copper Water Tube
909.13.1
B101—12
Specification for Lead-coated Copper Sheet and Strip for Building Construction
1403.5.3, Table 1507.2.8.2, Table 1507.4.3(1)
B209—14
Specification for Aluminum and Aluminum Alloy Steel and Plate
Table 1507.4.3(1)
B251—10
Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
909.13.1
B280—13
Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
909.13.1
B370—12
Specification for Copper Sheet and Strip for Building Construction
1403.5.2, Table 1507.2.8.2, Table 1507.4.3(1)
B695—04(2009)
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel Strip for Building Construction
2304.10.5.1, 2304.10.5.3
C5—10
Specification for Quicklime for Structural Purposes
Table 2507.2
C22/C22M—00(2015)
Specification for Gypsum
Table 2506.2
C27—98(2013)
Specification for Classification of Fireclay and High-alumina Refractory Brick
2111.6
C28/C28M—10(2015)
Specification for Gypsum Plasters
Table 2507.2
C31/C31M—15
Practice for Making and Curing Concrete Test Specimens in the Field
Table 1705.3
C33/C33M—13
Specification for Concrete Aggregates
722.3.1.4, 722.4.1.1.3
C35/C35—01(2014)
Specification for Inorganic Aggregates for Use in Gypsum Plaster
Table 2507.2
C55—2014a
Specification for Concrete Building Brick
Table 722.3.2
C59/C59M—00(2015)
Specification for Gypsum Casting Plaster and Molding Plaster
Table 2507.2
C61/C61M—00(2015)
Specification for Gypsum Keene's Cement
Table 2507.2
C62—13a
Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)
1807.1.6.3
C67—14
Test Methods of Sampling and Testing Brick and Structural Clay Tile
722.4.1.1.1, 2109.2.1.1
C73—14
Specification for Calcium Silicate Brick (Sand-lime Brick)
Table 722.3.2
C90—14
Specification for Loadbearing Concrete Masonry Units
Table 722.3.2, 1807.1.6.3, 2114.3
C91/C91M—12
Specification for Masonry Cement
Table 2507.2
C94/C94M—15a
Specification for Ready-mixed Concrete
110.3.1
C140/C140M—15
Test Method Sampling and Testing Concrete Masonry Units and Related Units
722.3.1.2
C150/C150M—15
Specification for Portland Cement
1903.1, Table 2507.2
C172/C172M—14a
Practice for Sampling Freshly Mixed Concrete
Table 1705.3
C199—84(2011)
Test Method for Pier Test for Refractory Mortars
2111.6, 2111.9, 2113.12
C206—14
Specification for Finishing Hydrated Lime
Table 2507.2
C208—12
Specification for Cellulosic Fiber Insulating Board
Table 1508.2, 2303.1.6
C216—15
Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Table 721.1(2), 1807.1.6.3
C270—14a
Specification for Mortar for Unit Masonry
2103.2.4
C315—07(2011)
Specification for Clay Flue Liners and Chimney Pots
2111.9, 2113.11.1, Table 2113.16(1)
C317/C317M—00(2015)
Specification for Gypsum Concrete
2514.1
C330/C330M—14
Specification for Lightweight Aggregates for Structural Concrete
202
C331/C331M—14
Specification for Lightweight Aggregates for Concrete Masonry Units
722.3.1.4, 722.4.1.1.3
C406/C406M—15
Specification for Roofing Slate
1507.7.5
C472—99(2014)
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
Table 2506.2
C473—15
Test Methods for Physical Testing of Gypsum Panel Products
Table 2506.2
C474—15
Test Methods for Joint Treatment Materials for Gypsum Board Construction
Table 2506.2
C475/C475M—15
Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
Table 2506.2
C514—04(2014)
Specification for Nails for the Application of Gypsum Board
Table 721.1(2), Table 721.1(3), Table 2506.2
C516—08(2014)e1
Specifications for Vermiculite Loose Fill Thermal Insulation
722.3.1.4, 722.4.1.1.3
C547—15
Specification for Mineral Fiber Pipe Insulation
Table 721.1(2), Table 721.1(3)
C549—06(2012)
Specification for Perlite Loose Fill Insulation
722.3.1.4, 722.4.1.1.3
C552—15
Standard Specification for Cellular Glass Thermal Insulation
Table 1508.2
C557—03(2009)e01
Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
Table 2506.2, 2508.4
C578—15
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Table 1508.2, 2603.10, Table 2603.12.1, Table 2603.12.2, Table 2603.13.1, Table 2603.13.2
C587—04(2014)
Specification for Gypsum Veneer Plaster
Table 2507.2
C595/C595M—14e1
Specification for Blended Hydraulic Cements
1903.1, Table 2507.2
C631—09(2014)
Specification for Bonding Compounds for Interior Gypsum Plastering
Table 2507.2
C635/C635M—13a
Specification for the Manufacture, Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
801.1.1.1, 2506.2.1
*C636/C636M—08
Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels
808.1.1.1
C652—15
Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
1807.1.6.3
C726—12
Standard Specification for Mineral Wool Roof Insulation Board
Table 1508.2
C728—15
Standard Specification for Perlite Thermal Insulation Board
Table 1508.2
C744—14
Specification for Prefaced Concrete and Calcium Silicate Masonry Units
Table 722.3.2
*C754—11
Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products
Table 2508.1, Table 2511.1.1
C836/C836M—15
Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
1507.15.2
*C840—11
Specification for Application and Finishing of Gypsum Board
Table 2508.1, 2509.2
*C841—03(2008 E1)
Specification for Installation of Interior Lathing and Furring
Table 2508.1, Table 2511.1.1
*C842—05(2010 E1)
Specification for Application of Interior Gypsum Plaster
Table 2511.1.1, 2511.3, 2511.4
*C843—99(2012)
Specification for Application of Gypsum Veneer Plaster
Table 2511.1.1
*C844—2010
Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
Table 2508.1
C847—14a
Specification for Metal Lath
Table 2507.2
C887—13
Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar
1805.2.2, 2103.2.2
C897—15
Specification for Aggregate for Job-mixed Portland Cement-based Plaster
Table 2507.2
C920—14a
Standard for Specification for Elastomeric Joint Sealants
Table 2506.2
*C926—13
Specification for Application of Portland Cement-based Plaster
2109.2.4.8, 2510.3, Table 2511.1.1, 2511.3, 2511.4, 2512.1, 2512.1.2, 2512.2, 2512.6, 2512.8.2, 2512.9, 2513.7
C932—06(2013)
Specification for Surface-applied Bonding Compounds for Exterior Plastering
Table 2507.2
C933—14
Specification for Welded Wire Lath
Table 2507.2
*C946—10
Specification for Construction of Dry-stacked, Surface-bonded Walls
2103.2.2, 2114.5
C954—15
Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness
Table 2506.2, Table 2507.2
C956—04(2015)
Specification for Installation of Cast-in-place Reinforced Gypsum Concrete
2514.1
C957/C957M—15
Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
1507.15.2
C1002—14
Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
Table 2506.2, Table 2507.2
*C1007—11a(2011)
Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Table 2508.1, Table 2511.1.1
C1029—15
Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation
1507.14.2
C1032—14
Specification for Woven Wire Plaster Base
Table 2507.2
C1047—14a
Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
Table 2506.2, Table 2507.2
*C1063—14d
Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-based Plaster
2109.2.4.8, 2510.3, Table 2511.1.1, 2512.1.1
C1088—14
Specification for Thin Veneer Brick Units Made from Clay or Shale
Table 721.1(2)
C1157/C1157M—11
Standard Performance Specification for Hydraulic Cement
1903.1, Table 2507.2
C1167—11
Specification for Clay Roof Tiles
1507.3.4
C1177/C1177M—13
Specification for Glass Mat Gypsum Substrate for Use as Sheathing
Table 1508.2, Table 2506.2
C1178/C1178M—13
Specification for Coated Mat Water-resistant Gypsum Backing Panel
Table 2506.2, Table 2509.2
C1186—08(2012)
Specification for Flat Fiber Cement Sheets
1403.10, 1404.16.1, 1404.16.2
C1261—13
Specification for Firebox Brick for Residential Fireplaces
2111.6, 2111.9
C1278/C1278M—07a(2011)
Specification for Fiber-reinforced Gypsum Panel
Table 1508.2, Table 2506.2
C1280—13a
Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
Table 2508.1, 2508.2
*C1283—11
Practice for Installing Clay Flue Lining
2113.9.1, 2113.12
C1288—14
Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets
Table 2509.2
C1289—15
Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Table 1508.2, 2603.10, Table 2603.12.1, Table 2603.12.2
C1313/C1313M—13
Standard Specification for Sheet Radiant Barriers for Building Construction Applications
1509.4
C1325—14
Standard Specification for Nonasbestos Fiber-mat Reinforced Cement Backer Units
Table 2509.2
C1328/C1328M—12
Specification for Plastic (Stucco Cement)
Table 2507.2
C1364—10B
Standard Specification for Architectural Cast Stone
2103.1
C1396/C1396M—14a
Specification for Gypsum Board
Figure 722.5.1(2), Figure 722.5.1(3), Table 2506.2
C1492—03(2009)
Standard Specification for Concrete Roof Tile
1507.3.5
C1568—08(2013)
Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
1504.2.1.1
C1600/C1600M—11
Standard Specification for Rapid Hardening Hydraulic Cement
Table 2507.2
C1629/C1629M—15
Standard Classification for Abuse-resistant Nondecorated Interior Gypsum Panel Products and Fiber-reinforced Cement Panels
403.2.3.1, 403.2.3.2, 403.2.3.4
C1658/C1658M—13
Standard Specification for Glass Mat Gypsum Panels
Table 2506.2
C1670—16
Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
2103.1
C1766—13
Standard Specification for Factory-laminated Gypsum Panel Products
Table 2506.2
D25—12
Specification for Round Timber Piles
1810.3.2.4, 2303.1.12
D41/D41M—11
Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D43/D43M—00(2012)e1
Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D56—05(2010)
Test Method for Flash Point by Tag Closed Cup Tester
202
D86—15
Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
202
D93—15
Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
202
D226/D226M—09
Specification for Asphalt-saturated Organic Felt Used in Roofing and Waterproofing
1403.2, 1505.2, 1507.1.1, Table 1507.1.1(1), 1507.3.3, Table 1507.8, 1507.9.5, Table 1507.10.2, 1507.18.3, 1507.18.4.1
D227/D227M—03(2011)e1
Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing
Table 1507.10.2
D312/D312M—15
Specification for Asphalt Used in Roofing
Table 1507.10.2
D422—63(2007)e2
Test Method for Particle-size Analysis of Soils
1803.5.3
D448—2012
Standard Classification for Sizes of Aggregate for Road and Bridge Construction
1507.12.3, 1507.13.3
D450/D450M—07(2013)e1
Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D635—14
Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
2606.4
D1143/D1143M—07(2013)
Test Methods for Deep Foundations Under Static Axial Compressive Load
1810.3.3.1.2
D1227—13
Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
Table 1507.10.2, 1507.15.2
D1557—12e1
Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort [56,000 ft-lb/ft3 (2,700 kN m/m3)]
1705.6, 1804.6
D1863/D1863M—05(2011)e1
Specification for Mineral Aggregate Used on Built-up Roofs
Table 1507.10.2
D1929—16
Standard Test Method for Determining Ignition Temperature of Plastics
402.6.4.4, 406.7.2, 1406.11.2.1, 1406.11.3.3, 1406.11.4.2, 1408.11.2.1, 2606.4
D1970/D1970M—15a
Specification for Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection
1507.1.1, 1502.2.8.2, 1507.3.9, 1507.5.7, 1507.8.8, 1507.9.9, 1507.11.2.1, 1507.18.4.1
D2178/D2178M—15
Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
Table 1507.10.2
D2487—11
Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
Table 1610.1, 1803.5.1
D2626/D2626M—04(2012)e1
Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing
Table 1507.1.1(1), 1507.3.3, Table 1507.10.2
D2822/D2822M—05(2011)e1
Specification for Asphalt Roof Cement, Asbestos Containing
Table 1507.10.2
D2823/D2823M—05(2011)e1
Specification for Asphalt Roof Coatings, Asbestos Containing
Table 1507.10.2
D2824/D2824M—13
Standard Specification for Aluminum-pigmented Asphalt Roof Coatings, Nonfibered and Fibered without Asbestos
Table 1507.10.2
D2843—16
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
2606.4
D2859—16
Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
804.4.1, 804.4.2
D2898—10
Test Methods for Accelerated Weathering of Fire-retardant-treated Wood for Fire Testing
1505.1, 2303.2.4, 2303.2.6
D3019—08
Specification for Lap Cement Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos Fibered
Table 1507.10.2
D3161/D3161M—15
Test Method for Wind Resistance of Steep Slope Roofing Products (Fan Induced Method)
1504.1.1, Table 1504.1.1, 1504.3.3, 1507.17.8
D3200—74(2012)
Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
2303.1.12
D3201/D3201M—13
Test Method for Hygroscopic Properties of Fire-retardant-treated Wood and Wood-based Products
2303.2.7
D3278—96(2011)
Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus
202
D3462/D3462M—10a
Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
1507.2.4
D3468/D3468M—99(2013)e1
Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
1507.15.2
D3679—13
Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
1403.9, 1404.14
D3689/D3698M—07(2013)e1
Test Methods for Deep Foundations under Static Axial Tensile Load
1810.3.3.1.5
D3737—12
Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
2303.1.3
D3746—85(2008)
Test Method for Impact Resistance of Bituminous Roofing Systems
1504.7
D3747—79(2007)
Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
Table 1507.10.2
D3909/D3909M—14
Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
1507.2.8.2, 1507.6.5, Table 1507.10.2
D3957—09
Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
2303.1.11
D4022/D4022M—07(2012)e1
Specification for Coal Tar Roof Cement, Asbestos Containing
Table 1507.10.2
D4272—15
Test Method for Total Energy Impact of Plastic Films by Dart Drop
1504.7
D4318—10e1
Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils
1803.5.3
D4434/D4434M—12
Specification for Poly (Vinyl Chloride) Sheet Roofing
1507.13.2
D4479/D4479M—07(2012)e1
Specification for Asphalt Roof Coatings—Asbestos-free
Table 1507.10.2
D4586/D4586M—07(2012)e1
Specification for Asphalt Roof Cement—Asbestos-free
Table 1507.10.2
D4601/D4601M—04(2012)e1
Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing
Table 1507.10.2, 1507.11.2.1
D4637/D4637M—14e1
Specification for EPDM Sheet Used in Single-ply Roof Membrane
1507.12.2
D4829—11
Test Method for Expansion Index of Soils
1803.5.3
D4869/D4869M—15
Specification for Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope Roofing
1507.1.1, Table 1507.1.1(1), 1507.18.3, 1507.18.4.1
D4897/D4897M—01(2009)
Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing
Table 1507.10.2
D4945—12
Test Method for High-strain Dynamic Testing of Deep Foundations
1810.3.3.1.2
D4990—97a(2013)
Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
Table 1507.10.2
D5019—07a
Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane
1507.12.2
D5055—13e1
Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists
2303.1.2
D5456—14b
Specification for Evaluation of Structural Composite Lumber Products
2303.1.10
D5516—09
Test Method of Evaluating the Flexural Properties of Fire-retardant Treated Softwood Plywood Exposed to Elevated Temperatures
2303.2.5.1
D5643/D5643M—06(2012)e1
Specification for Coal Tar Roof Cement, Asbestos-free
Table 1507.10.2
D5664—10
Standard Test Method for Evaluating the Effects of Fire-retardant Treatment and Elevated Temperatures on Strength Properties of Fire-retardant Treated Lumber
2303.2.5.2
D5665/D5665M—99a(2014)e1
Specification for Thermoplastic Fabrics Used in Cold-applied Roofing and Waterproofing
Table 1507.10.2
D5726—98(2013)
Specification for Thermoplastic Fabrics Used in Hot-applied Roofing and Waterproofing
Table 1507.10.2
D6083—05e01
Specification for Liquid Applied Acrylic Coating Used in Roofing
Table 1507.10.2, Table 1507.14.3, 1507.15.2
D6162/D6162M—00a(2015)e1
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
1507.11.2
D6163/D6163M—00(2015)e1
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
1507.11.2
D6164/D6164M—11
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Metal Materials Using Polyester Reinforcements
1507.11.2
D6222/D6222M—11
Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
1507.11.2
D6223/D6223M—02(2009)e1
Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
1507.11.2
D6298—13
Specification for Fiberglass Reinforced Styrene-butadiene-styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
1507.11.2
D6305—08(2015)e1
Practice for Calculating Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood Roof Sheathing
2303.2.5.1
D6380/D6380M—03(2013)e1
Standard Specification for Asphalt Roll Roofing (Organic) Felt
Table 1507.1.1(1), 1507.2.8.2, 1507.3.3, 1507.6.5
D6464—03a(2009)e1
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
Table 2506.2, 2508.4
D6509/D6509M—09(2015)
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
1507.11.2
D6694/D6694M—08(2013)e1
Standard Specification for Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
Table 1507.14.3, 1507.15.2
D6754/D6754M—10
Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
1507.13.2
D6757—2013
Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep Slope Roofing
1507.1.1, Table 1507.1.1(1), 1507.18.3, 1507.18.4.1
D6841—08
Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-retardant Treated Lumber
2303.2.5.2
D6878/D6878M—13
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
1507.13.2
D6947/D6947M—07(2013)e1
Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
Table 1507.14.3, 1507.15.2
D7032—14
Standard Specification for Establishing Performance Ratings for Wood, Plastic Composite Deck Boards and Guardrail Systems (Guards or Rails)
705.2.3.1, 2612.2, 2612.4, 2612.5.1
D7147—11
Specification for Testing and Establishing Allowable Loads of Joist Hangers
2303.5, 2304.10.3
D7158/D7158M—16
Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
1504.1.1, Table 1504.1.1
D7254—15
Standard Specification for Polypropylene (PP) Siding
1403.12
D7425/D7425M—13
Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
1507.14.2
D7655/D7655M—12
Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems
1507.12.3, 1507.13.3
D7672—14
Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
2303.1.13
E84—16
Standard Test Methods for Surface Burning Characteristics of Building Materials
202, 402.6.4.4, 406.7.2, 703.5.2, 720.1, 720.4, 803.1.2, 803.5.2, 803.10, 803.11, 803.12, 803.13, 806.7, 1402.5, 1403.12.1, 1406.9, 1406.10.1, 1408.9, 1408.10.1, 1510.6.2, 1510.6.3, 2303.2, 2603.3, 2603.4.1.13, 2603.5.4, 2603.5.5, 2603.7, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3, D102.2.8
E90—09
Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
1206.2, 1206.2.1
*E96/E96M—00
Standard Test Methods for Water Vapor Transmission of Materials
202
E108—16
Standard Test Methods for Fire Tests of Roof Coverings
1505.1, 2603.6, 2610.2, 2610.3
E119—16
Standard Test Methods for Fire Tests of Building Construction and Materials
703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.4.1, 714.5.1, 715.1, 715.4, Table 716.1(1), Table 716.1(2), Table 716.1(3), 716.1.2.3, 716.2.5.1.1, 716.2.5.4, 716.3.2.1.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 717.6.2, Table 721.1(1), 2103.1, 2603.5.1
E136—16
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
703.5.1
E283—04(2012)
Standard Test Method for Determining Rate of Air Leakage through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences across the Specimen
202
E330/E330M—14
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
1709.5.2
E331—00(2009)
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform Static Air Pressure Difference
1402.2
E492—09
Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine
1206.3
E605/E605M—93(2015)e1
Test Method for Thickness and Density of Sprayed Fire-resistive Material (SFRM) Applied to Structural Members
1705.14.4.1, 1705.14.4.2, 1705.14.4.5, 1705.14.5
E648—15e1
Standard Test Method for Critical Radiant Flux of Floor-covering Systems Using a Radiant Heat Energy Source
406.2.4, 424.2, 804.2, 804.3
E681—09(2015)
Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases
202
E736/E736M—00(2015)e1
Test Method for Cohesion/Adhesion of Sprayed Fire-resistive Materials Applied to Structural Members
704.13.3.2, 1705.14.6
E814—2013A
Test Method for Fire Tests of Penetration Firestop Systems
202, 714.4.1.2, 714.4.2, 714.5.1.2
E970—14
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
720.3.1
E1300—12ae1
Practice for Determining Load Resistance of Glass in Buildings
2404.1, 2404.2, 2404.3.1, 2404.3.2, 2404.3.3, 2404.3.4, 2404.3.5
E1354—16
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
424.2
E1592—05(2012)
Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
1504.3.2
*E1602—03e1
Guide for Construction of Solid Fuel-burning Masonry Heaters
2112.2
E1886—13A
Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
1609.2
E1966—15
Standard Test Method for Fire-resistive Joint Systems
202, 715.3
E1996—14a
Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
1609.2, 1609.2.2
E2072—14
Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
1025.4
E2174—14b
Standard Practice for On-site Inspection of Installed Fire Stops
1705.17.1
E2178—13
Standard Test Method for Air Permeance of Building Materials
202
E2273—03(2011)
Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
1407.4.1
E2307—15b
Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using the Intermediate-scale, Multistory Test Apparatus
715.4
E2353—14
Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards and Balustrades
2407.1.2
E2393—10a(2015)
Standard Practice for On-site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
1705.17.2
E2404—15a
Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facing and Veneers to Assess Surface Burning Characteristics
803.5.2, 803.12
E2556/E2556M—10
Standard Specification for Vapor Permeable Flexible Sheet Water-resistive Barriers Intended for Mechanical Attachment
2510.6
E2568—09e1
Standard Specification for PB Exterior Insulation and Finish Systems
1407.2
E2570/E2570M—07(2014)e1
Standard Test Method for Evaluating Water-resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage
1407.4.1.1, 1705.16.1
E2573—12
Standard Practice for Specimen Preparation and Mounting of Site-fabricated Stretch Systems to Assess Surface Burning Characteristics
803.10
E2579—13
Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
803.11
E2599—15
Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
2614.3
E2634—11(2015)
Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
1903.4
E2751/E2751M—13
Practice for Design and Performance of Supported Laminated Glass Walkways
2409.1
F547—06(2012)
Terminology of Nails for Use with Wood and Wood-base Materials
Table 2506.2
F1346—91(2010)
Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
3109.3.1
F1667—15
Specification for Driven Fasteners: Nails, Spikes and Staples
Table 721.1(2), Table 721.1(3), 1507.2.5, 1507.17.5, 2303.6, Table 2304.10.1, 2304.10.5, Table 2506.2, Table 2603.13.1, Table 2603.13.2
F2006—17
Standard/Safety Specification for Window Fall Prevention Devices for Nonemergency Escape (Egress) and Rescue (Ingress) Windows
1015.8
F2090—17
Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms
1015.8, 1015.8.1
F2200—14
Standard Specification for Automated Vehicular Gate Construction
3110.2
F2208—09(2014)
Standard Safety Specification for Residential Pool Alarms
3109.5
G152—13
Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
1504.6
G154—12a
Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
1504.6
G155—13
Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials
1504.6
AWC
American Wood Council
222 Catoctin Circle SE, Suite 201
Leesburg, VA 20175
*AWC WCD No. 4—2003
Wood Construction Data—Plank and Beam Framing for Residential Buildings
2306.1.2
*ANSI/AWC WFCM—2018
Wood Frame Construction Manual for One- and Two-Family Dwellings
1609.1.1, 1609.1.1.1, 2302.1, 2308.2.4, 2308.6.7.2, 2309.1
*ANSI/AWC NDS—2018
National Design Specification (NDS) for Wood Construction—with 2018 NDS Supplement
202, 722.1, Table 1604.3, 1809.12, 1810.3.2.4, Table 1810.3.2.6, 1905.1.8, 2304.13, 2306.1, Table 2306.2(1), Table 2306.2(2), Table 2306.3(1), Table 2306.3(2), 2307.1, Table 2603.1.3.1, Table 2603.13.2
*AWC STJR—2015
Span Tables for Joists and Rafters
2306.1.1, 2308.4.2.1, 2308.7.1, 2308.7.2
*ANSI/AWC PWF—2015
Permanent Wood Foundation Design Specification
1805.2, 1807.1.4, 2304.10.5.2
*ANSI/AWC SDPWS—2015
Special Design Provisions for Wind and Seismic
202, 2305.1, 2305.2, 2305.3, 2306.1, 2306.2, 2306.3, Table 2306.3(1), Table 2306.3(3), 2307.1
AWCI
Association of the Wall and Ceiling Industry
513 West Broad Street, Suite 210
Falls Church, VA 22046
12-B—14
Technical Manual 12B, Third Edition; Standard Practice for the Testing and Inspection of Field Applied Thin Film Intumescent Fire-resistive Materials; an Annotated Guide
1705.15
AWPA
American Wood Protection Association
P.O. Box 361784
Birmingham, AL 35236-1784
C1—03
All Timber Products—Preservative Treatment by Pressure Processes
1505.6
M4—16
Standard for the Care of Preservative-treated Wood Products
1810.3.2.4.1, 2303.1.9
U1—16
USE CATEGORY SYSTEM: User Specification for Treated Wood Except Commodity Specification H
Table 1507.9.6, 1807.1.4, 1807.3.1, 1809.12, 1810.3.2.4.1, 2303.1.9, 2304.12.1, 2304.12.2, 2304.12.3, 2304.12.4, 2304.12.5
AWS
American Welding Society
8669 NW 36 Street, #130
Miami, FL 33166
D1.4/D1.4M—2011
Structural Welding Code—Reinforcing Steel Including Metal Inserts and Connections In Reinforced Concrete Construction
1704.5, Table 1705.3, 1705.3.1, 2107.3
BHMA
Builders Hardware Manufacturers' Association
355 Lexington Avenue, 15th Floor
New York, NY 10017-6603
*A 156.10—2011
Power Operated Pedestrian Doors
1010.1.4.2
*A 156.19—2013
Standard for Power Assist and Low Energy Power Operated Doors
1010.1.4.2
*A 156.27—2011
Power and Manual Operated Revolving Pedestrian Doors
1010.1.4.1.1
A 156.38—2014
Low Energy Power Operated Sliding and Folding Doors
1010.1.4.2
CEN
European Committee for Standardization (CEN)
Central Secretariat
Rue de Stassart 36
B-10 50 Brussels
EN 1081—98
Resilient Floor Coverings—Determination of the Electrical Resistance
406.7.1
BS EN 15250—2007
Slow Heat Release Appliances Fired by Solid Fuel Requirements and Test Methods
2112.2, 2112.5
CPA
Composite Panel Association
19465 Deerfield Avenue, Suite 306
Leesburg, VA 20176
ANSI A135.4—2012
Basic Hardboard
1403.3.1, 2303.1.7
ANSI A135.5—2012
Prefinished Hardboard Paneling
2303.1.7, 2304.7
ANSI A135.6—2012
Engineered Wood Siding
1403.3.2, 2303.1.7
A208.1—2016
Particleboard
2303.1.8, 2303.1.8.1
CPSC
Consumer Product Safety Commission
4330 East/West Highway
Bethesda, MD 20814
16 CFR Part 1201 (2002)
Safety Standard for Architectural Glazing Material
2406.2, Table 2406.2(1), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3.1, 2409.4.1
16 CFR Part 1209 (2002)
Interim Safety Standard for Cellulose Insulation
720.6
16 CFR Part 1404 (2002)
Cellulose Insulation
720.6
16 CFR Part 1500 (2009)
Hazardous Substances and Articles; Administration and Enforcement Regulations
202
16 CFR Part 1500.44 (2009)
Method for Determining Extremely Flammable and Flammable Solids
202
16 CFR Part 1507 (2002)
Fireworks Devices
202
16 CFR Part 1630 (2007)
Standard for the Surface Flammability of Carpets and Rugs
804.4.1
CSA
Canadian Standards Association
8501 East Pleasant Valley Road
Cleveland, OH 44131-5516
AAMA/WDMA/CSA 101/I.S.2/A440—17
North American Fenestration Standard/Specifications for Windows, Doors and Unit Skylights
1709.5.1, 2405.5
*ASME A17.1—2016/CSA B44-—16
Safety Code for Elevators and Escalators
907.3.3, 911.1.6, 1009.4.1, 1607.10.1, 3001.2, Table 3001.3, 3001.5, 3002.5, 3003.2, 3007.1, 3008.1.4, 3008.7.1
ASME A17.7—2007/CSA B44.7—07
Performance-based Safety Code for Elevators and Escalators
Table 3001.3, 3001.5, 3002.5
CSSB
Cedar Shake & Shingle Bureau
P. O. Box 1178
Sumas, WA 98295-1178
CSSB—97
Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau
Table 1507.8.5, Table 1507.9.6
DASMA
Door & Access Systems Manufacturers Association International
1300 Sumner Avenue
Cleveland, OH 44115-2851
ANSI/DASMA 107—2017
Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
2603.4.1.9
ANSI/DASMA 108—2017
Standard Method for Testing Sectional Garage Doors, Rolling Doors and Flexible Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference
1709.5.2
ANSI/DASMA 115—2016
Standard Method for Testing Sectional Garage Doors, Rolling Doors and Flexible Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure
1609.2.3
DOC
U.S. Department of Commerce
National Institute of Standards and Technology
1401 Constitution Avenue NW
Washington, DC 20230
PS 1—09
Structural Plywood
2303.1.5, 2304.7, Table 2304.8(4), Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS 2—10
Performance Standard for Wood-based Structural-use Panels
2303.1.5, 2304.7, Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS 20—05
American Softwood Lumber Standard
202, 1810.3.2.4, 2303.1.1
DOL
U.S. Department of Labor
Occupational Safety and Health Administration
c/o Superintendent of Documents
U.S. Government Printing Office
Washington, DC 20402-9325
29 CFR Part 1910.1000 (2015)
Air Contaminants
202
DOTn
U.S. Department of Transportation
Office of Hazardous Material Safety
1200 New Jersey Avenue, SE
East Building, 2nd Floor
Washington, DC 20590
49 CFR Parts 100—185—2015
Hazardous Materials Regulations
202
*49 CFR Parts 173.137—(2009)
Shippers—General Requirements for Shipments and Packaging—Class 8—Assignment of Packing Group
202
49 CFR Parts 173—178—2015
Specification of Transportation of Explosive and Other Dangerous Articles, UN 0335,UN 0336 Shipping Containers
202
FEMA
Federal Emergency Management Agency
Federal Center Plaza
500 C Street S.W.
Washington, DC 20472
*FEMA-TB-11—01
Crawlspace Construction for Buildings Located in Special Flood Hazard Areas
1805.1.2.1
FM
FM Approvals
Headquarters Office
1151 Boston-Providence Turnpike
P.O. Box 9102
Norwood, MA 02062
4430—2012
Approval Standard for Heat and Smoke Vents
910.3.1
4450—(1989)
Approval Standard for Class 1 Insulated Steel Deck Roofs—with Supplements through July 1992
1509.2
4470—2016
Approval Standard for Single-ply Polymer-modified Bitumen Sheet, Built-up Roof (BUR) and Liquid Applied Roof Assemblies for Use in Class 1 and Noncombustible Roof Deck Construction
1504.7
4474—2011
American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
1504.3.1, 1504.3.2, 1504.3.3
4880—2015
Approval Standard for Class 1 Fire Rating of Building Panels or Interior Finish Materials
2603.4, 2603.9
GA
Gypsum Association
962 Wayne Ave, Suite 620
Silver Springs, MD 20910
*GA 216—2013
Application and Finishing of Gypsum Panel Products
Table 2508.1, 2509.2
GA 600—2015
Fire-resistance Design Manual, 21st Edition
Table 721.1(1), Table 721.1(2), Table 721.1(3)
HPVA
Hardwood Plywood & Veneer Association
1825 Michael Faraday Drive
Reston, VA 20190
ANSI/HPVA HP-1—2016
American National Standard for Hardwood and Decorative Plywood
2303.3, 2304.7
ICC
International Code Council, Inc.
500 New Jersey Ave NW
6th Floor
Washington, DC 20001
*EBCNYS—20
Existing Building Code of New York State
101.4.7, 102.6, 201.3, Table 504.3, Table 504.4, Table 504.6, 2701.1, 2801.1, 3113.1.1
*ECCCNYS—20
Energy Conservation Construction Code of New York State
101.4.6, 201.3, 202, 1202.1, 1202.4.3.2, 1301.1.1, 1405.3
*FCNYS—20
Fire Code of New York State
101.4.5, 102.6, 201.3, 202, 307.1, Table 307.1(1), Table 307.1(2), 307.1.1, 307.1.2, 403.4.5, 404.2, 406.2.9, 406.7, 406.8, 407.4, 410.2.6, 411.1, 412.1, 412.5.1, 413.1, 414.1.1, 414.1.2, 414.1.2.1, 414.2, Table 414.2.5(1), 414.2.5.1, 414.2.5.2, Table 414.2.5(2), 414.2.5.3, 414.3, 414.5, 414.5.1, Table 414.5.1, 414.5.2, 414.5.3, 414.6, 415.2, 415.6, 415.6.1, 415.6.1.1, 415.6.1.4, Table 415.6.2, 415.7.3, 415.8.2, 415.9, 415.9.1, 415.9.1.3, 415.9.1.4, 415.9.1.6, 415.9.1.7, 415.9.1.8, 415.9.2, 415.9.3, 415.10, 415.11, 415.11.1.7, 415.11.4, 415.11.7.2, 415.11.9.3, 415.11.10.1, 416.1, 416.2.3, 416.4, 422.3.1, 426.1, 426.1.4, 427.1, 427.2.3, 428.1, 428.2, 428.3, Table 504.3, Table 504.4, Table 506.2, 507.4, 507.8.1.1.1, 507.8.1.1.2, 507.8.1.1.3, Table 509, 705.8.1, 707.1, 806.3, 901.2, 901.3, 901.5, 901.6.3, 901.6.4, 903.2.7.1, Table 903.2.11.6, 903.2.12, 903.5, 904.2.2, 904.11.3, 905.1, 905.3.6, 905.3.7, 906.1, Table 906.1, 906.4, 907.1.1, 907.2.5, 907.2.6, 907.2.8, 907.2.12.2, 907.2.14, 907.2.15, 907.2.22, 907.5.2.2, 907.6.6, 907.6.6.2, 907.8, 909.6.3, 909.12.1, 909.19, 909.20, 910.2.2, 910.5, 912.4.3, 915.1, 916.7, 916.11, 918.1, 1002.1, 1002.2, 1010.1.9.7, 1202.5.2, 1202.6, 1507.16, 1512.1, Table 1604.5, 2603.4.1.12, 2701.1, 2702.1.3, 2702.2.3, 2702.2.7, 2702.2.10, 2702.2.12, 2702.2.14, 2702.4, 3003.3, 3008.1.3, 3102.1, 3102.8.3, 3103.1, 3111.1.2, 3111.2, 3111.3, 3111.3.4, 3111.3.5, 3302.3, 3303.7, 3309.2
*FGCNYS—20
Fuel Gas Code of New York State
101.4.1, 201.3, Table 307.1(1), 415.9.2, 2113.11.1.2, 2113.15, 2702.2.6, 2801.1
*ICC A117.1—09
Accessible and Usable Buildings and Facilities
202, 907.5.2.3.3, 1009.8.2, 1009.9, 1009.11, 1010.1.9.8.1, 1012.1, 1012.6.5, 1012.10, 1013.4, 1023.9, 1102.1, 1107.2, 1109.1, 1109.2, 1109.5.1, 1109.5.2, 1111.2, 1111.3, 1111.4, 1111.4.2
*ICC 300—17
ICC Standard on Bleachers, Folding and Telescopic Seating and Grandstands
1029.1.1, 1029.7, Table 1607.1
*ICC 400—17
Standard on Design and Construction of Log Structures
2302.2
*ICC 500—14
ICC/NSSA Standard on the Design and Construction of Storm Shelters
202, 423.1, 423.2, 423.3, 423.4, 1604.5.1, 1604.10
*ICC 600—14
Standard for Residential Construction in High-wind Regions
1609.1.1, 1609.1.1.1, 2308.2.4
ICC 900/SRCC 300—2015
Solar Thermal System Standard
3111.2.1
ICC 901/SRCC 100—2015
Solar Thermal Collector Standard
3111.2.1
IPSDC—18
International Private Sewage Disposal Code®
101.4.3, 2901.1
ISPSC—18
International Swimming Pool and Spa Code®
3109.1
IWUIC—18
International Wildland-Urban Interface Code®
Table 1505.1
*MCNYS—20
Mechanical Code of New York State
101.4.2, 201.3, Table 307.1(1), 406.2.9, 406.6.2, 406.8.1, 406.8.4, 407.2.6, 409.3, 412.5.6, 414.1.2, 414.3, 415.9.1, 415.9.2, 415.9.3, 415.11.11, 416.2.3, 420.8, 420.9, 420.10.1, 421.4, 426.1.4, 427.2.2, 427.2.3, 428.4.7, 603.1, 603.1.1, 603.1.2, 712.1.6, 717.2.2, 717.5.3, 715.4, 715.5, 717.6.1, 717.6.2, 717.6.3, 718.5, 720.1, 720.7, 903.2.11.4, 904.2.2, 904.12, 907.3.1, 909.1, 909.10.2, 909.13.1, 910.4.7, 1006.2.2.3, 1011.16, 1020.5.1, 1202.1, 1202.2.2, 1202.4.3.2, 1202.5.2.1, 1202.6, 1208.3, 2702.2.5, 2801.1, 3111.2
*PCNYS—20
Plumbing Code of New York State
101.4.3, 201.3, 415.9.3, 603.1.2, 718.5, 903.3.5, 1205.3.3, 1502.1, 1502.2, 1805.4.3, 2901.1, Table 2902.1, 3111.2, 3305.1
*PMCNYS—20
Property Maintenance Code of New York State
101.4.4, 102.6, 103.3, 2701.1, 2801.1
*RCNYS—20
Residential Code of New York State
101.2, 305.2.3, 308.2.4, 308.3.2, 308.5.4, 310.1, 310.4.1, 310.4.2, 2308.1
SBCCI SSTD 11—97
Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles
1504.2.1.1, 1504.2.1.2
ISO
International Organization for Standardization
Chemin de Blandonnet 8
CP 401
1214 Vernier
Geneva, Switzerland
ISO 8115—86
Cotton Bales—Dimensions and Density
Table 307.1(1), Table 415.11.1.1.1
ISO 8336—09
Fiber-cement Flat Sheets—Product Specification and Test Methods
1403.10, 1404.16.1, 1404.16.2, Table 2509.2
MHI
Material Handling Institute
8720 Red Oak Blvd. Suite 201
Charlotte, NC 28217
ANSI MH29.1—08
Safety Requirements for Industrial Scissors Lifts
Table 3001.3
NAAMM
National Association of Architectural Metal Manufacturers
800 Roosevelt Road, Bldg. C, Suite 312
Glen Ellyn, IL 60137
FP 1001—07
Guide Specifications for Design of Metal Flag Poles
1609.1.1
NCMA
National Concrete Masonry Association
13750 Sunrise Valley
Herndon, VA 22071-4662
TEK 5—84(1996)
Details for Concrete Masonry Fire Walls
Table 721.1(2)
NFPA
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
*10—18
Standard for Portable Fire Extinguishers
906.2, 906.3.2, 906.3.4, Table 906.3(1), Table 906.3(2)
*11—16
Standard for Low Expansion Foam
904.7
*12—15
Standard on Carbon Dioxide Extinguishing Systems
904.8, 904.12
*12A—15
Standard on Halon 1301 Fire Extinguishing Systems
904.9
*13—16
Standard for Installation of Sprinkler Systems
712.1.3.1, 903.3.1.1, 903.3.2, 903.3.8.2, 903.3.8.5, 904.12, 905.3.4, 907.6.4, 1019.3
*13D—16
Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes
903.3.1.3
*13R—16
Standard for the Installation of Sprinkler Systems in Low-rise Residential Occupancies
903.3.1.2, 903.3.5.2, 903.4
*14—16
Standard for the Installation of Standpipe and Hose System
905.2, 905.3.4, 905.4.2, 905.6.2, 905.8
*16—15
Standard for the Installation of Foam-water Sprinkler and Foam-water Spray Systems
904.7, 904.12
*17—17
Standard for Dry Chemical Extinguishing Systems
904.6, 904.12
*17A—17
Standard for Wet Chemical Extinguishing Systems
904.5, 904.12
*20—16
Standard for the Installation of Stationary Pumps for Fire Protection
412.2.4.1, 913.1, 913.2, 913.2.1, 913.5
*30—18
Flammable and Combustible Liquids Code
415.6, 507.8.1.1.1, 507.8.1.1.2
*30A—18
Code for Motor Fuel Dispensing Facilities and Repair Garages
406.2.9.2
*31—16
Standard for the Installation of Oil-burning Equipment
2113.15
*32—16
Standard for Dry Cleaning Plants
415.9.3
*40—16
Standard for the Storage and Handling of Cellulose Nitrate Film
409.1
*45—15
Standard on Fire Protection Laboratories Using Chemicals (2015 Edition)
428.3.7
*58—17
Liquefied Petroleum Gas Code
415.9.2
*61—17
Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Product Facilities
426.1
*70—17
National Electrical Code
108.3, 406.2.7, 406.2.9, 412.5.7, 415.11.1.8, Table 509, 904.3.1, 907.6.1, 909.12.2, 909.16.3, 910.4.6, 1204.4.1, 2701.1, 2702.1.3, 3111.3
*72—16
National Fire Alarm and Signaling Code
407.4.4.3, 407.4.4.5, 407.4.4.5.1, 901.6, 903.4.1, 904.3.5, 907.1.2, 907.2, 907.2.6, 907.2.9.3, 907.2.10, 907.2.12.2, 907.3, 907.3.3, 907.3.4, 907.5.2.1.2, 907.5.2.2, 907.5.2.2.5, 907.6, 907.6.1, 907.6.2, 907.6.6, 907.7, 907.7.1, 907.7.2, 911.1.6, 917.1, 2702.2.4, 3005.5, 3007.7
*80—16
Standard for Fire Doors and Other Opening Protectives
410.2.5, 509.4.2, 716.1, 716.2.5.1, 716.2.6.4, 716.2.9, 716.3.4.1, 716.3.5, 1010.1.4.3
*82—14
Standard on Incinerators and Waste and Linen Handling Systems and Equipment
713.13
*85—15
Boiler and Combustion System Hazards Code
426.1
*92—15
Standard for Smoke Control Systems
909.7, 909.8
*99—18
Health Care Facilities Code
407.11, 422.6, 425.1
*101—18
Life Safety Code
1029.6.2
*105—16
Standard for Smoke Door Assemblies and Other Opening Protectives
405.4.2, 710.5.2.2, 716.2.10, 909.20.4.1
*110—16
Standard for Emergency and Standby Power Systems
2702.1.3
*111—13
Standard on Stored Electrical Energy Emergency and Standby Power Systems
2702.1.3
*120—15
Standard for Fire Prevention and Control in Coal Mines
426.1
*170—18
Standard for Fire Safety and Emergency Symbols
1025.2.6.1
*211—16
Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances
2112.5
*221—18
Standard for High Challenge Fire Walls, Fire Walls and Fire Barrier Walls
706.2
*252—17
Standard Methods of Fire Tests of Door Assemblies
Table 716.1(1), 716.1.1, 716.1.2.2.1, 716.2.1.1, 716.2.1.2, 716.2.2.1, 716.2.2.2, 716.2.2.3.1, 716.2.5.1.1
*253—15
Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
406.2.4, 424.2, 804.2, 804.3
*257—17
Standard for Fire Test for Window and Glass Block Assemblies
Table 716.1(1), 716.1.1, 716.1.2.2.2, T716.2.1.3, 716.3.1.1, 716.3.1.2, 716.3.2.1.3, 716.3.4
*259—18
Standard Test Method for Potential Heat of Building Materials
2603.4.1.10, 2603.5.3
*265—15
Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings on Full Height Panels and Walls
803.5.1, 803.5.1.1
*268—17
Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source
1405.1.1.1, 1405.1.1.1.1, 1405.1.1.1.2, 2603.5.7
*275—17
Standard Method of Fire Tests for the Evaluation of Thermal Barriers
1406.10.2, 1408.10.2, 2603.4
*276—15
Standard Method of Fire Tests for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-deck Roofing Components
1508.1, 2603.3, 2603.4.1.5
*285—12
Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Nonload-bearing Wall Assemblies Containing Combustible Components
718.2.6, 1402.5, 1406.10.4, 1408.10.4, 1510.6.2, 2603.5.5
*286—15
Standard Methods of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
402.6.4.4, 803.1.1, 803.1.1.1, 803.11, 803.12, 803.13, 1406.10.3, 2603.7, 2603.9, 2604.2.4, 2614.4, 3105.3
*288—17
Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal in Fire-resistance-rated Floor Systems
712.1.13.1
*289—13
Standard Method of Fire Test for Individual Fuel Packages
402.6.2, 402.6.4.5, 424.2, 806.4
*409—16
Standard for Aircraft Hangars
412.3.6, Table 412.3.6, 412.3.6.1, 412.5.5
*418—16
Standard for Heliports
412.7.4
*484—15
Standard for Combustible Metals
426.1
*652—16
Standard on the Fundamentals of Combustible Dust
426.1
*654—17
Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids
426.1
*655—17
Standard for the Prevention of Sulfur Fires and Explosions
426.1
*664—17
Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
426.1
*701—15
Standard Methods of Fire Tests for Flame Propagation of Textiles and Films
410.2.6, 424.2, 806.4, 3102.3, 3102.3.1, 3102.6.1.1, 3105.3
*704—17
Standard System for the Identification of the Hazards of Materials for Emergency Response
202, 415.5.2
*750—15
Standard on Water Mist Fire Protection Systems
202, 904.11.1.1, 904.12
*1124—06
Code for the Manufacture, Transportation, Storage and Retail Sales of Fireworks and Pyrotechnic Articles
415.6.1.1
*1402—19
Guide to Building Fire Service Training Centers
430.1
*1403—18
Standard on Live Fire Training Evolutions
430.1
*2001—15
Standard on Clean Agent Fire Extinguishing Systems
904.10
*2010—15
Standard for Fixed Aerosol Fire-extinguishing Systems
904.14
PCI
Precast Prestressed Concrete Institute
200 West Adams Street, Suite 2100
Chicago, IL 60606-6938
MNL 124—11
Design for Fire Resistance of Precast Prestressed Concrete
722.2.3.1
MNL 128—01
Recommended Practice for Glass Fiber Reinforced Concrete Panels
1903.3
PTI
Post-Tensioning Institute
38800 Country Club Drive
Farmington Hills, MI 48331
PTI DC—10.5-12
Standard Requirements for Design and Analysis of Shallow Concrete Foundations on Expansive Soils
1808.6.2
RMI
Rack Manufacturers Institute
8720 Red Oak Boulevard, Suite 201
Charlotte, NC 28217
*ANSI/MH16.1—12
Specification for Design, Testing and Utilization of Industrial Steel Storage Racks
2209.1
ANSI/MH16.3—16
Specification for the Design, Testing and Utilization of Industrial Steel Cantilevered Storage Racks
2209.2
SBCA
Structural Building Components Association
6300 Enterprise Lane
Madison, WI 53719
ANSI/FS 100-12
Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating Sheathing Used in Exterior Wall Covering Assemblies
2603.10
SDI
Steel Deck Institute
2661 Clearview Road #3
Allison Park, PA 15101
*SDI NC—2010
Standard for Noncomposite Steel Floor Deck
2210.1.1.1
*SDI RD—2010
Standard for Steel Roof Deck
2210.1.1.2
*SDI-C—2011
Standard for Composite Steel Floor Deck—Slabs
2210.1.1.3
SDI-QA/QC—2017
Standard for Quality Control and Quality Assurance for Installation of Steel Deck
1705.2.2
SJI
Steel Joist Institute
140 West Evans Street,
Suite 203,
Florence, SC 29501
*SJI 100—15
44th Edition Standard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders K-Series, LH-Series, DHL-Series, Joist Girders
1604.3.3, 2203.2, 2207.1
*SJI 200—15
Standard Specification for Composite Steel Joists, CJ-Series
1604.3.3, 2203.2, 2207.1
SPRI
Single-Ply Roofing Institute
465 Waverly Oaks Road, Suite 421
Waltham, MA 02452
*ANSI/SPRI/FM 4435-ES-1—11
Wind Test Design Standard for Edge Systems Used with Low Slope Roofing Systems
1504.5
*ANSI/SPRI RP-4—13
Wind Design Guide for Ballasted Single-ply Roofing Systems
1504.4
ANSI/SPRI VF1—10
External Fire Design Standard for Vegetative Roofs
1505.10
SRCC
Solar Rating & Certification Corporation
400 High Point Drive, Suite 400
Cocoa, FL 32926
ICC 900/SRCC 300—2015
Solar Thermal System Standard
3111.2.1
ICC 901/SRCC 100—2015
Solar Thermal Collector Standard
3111.2.1
TIA
Telecommunications Industry Association
1320 N. Courthouse Road #200
Arlington, VA 22201-3834
*222-H—2017
Structural Standards for Antenna Supporting Structures, Antennas and Small Wind Turbine Support Structures, second printing — June 25, 2018
1609.1.1, 3108.1, 3108.2
TMS
The Masonry Society
105 South Sunset Street, Suite Q
Longmont, CO 80501
*216—2014
Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies
Table 721.1(2), 722.1
*302—2012
Standard Method for Determining the Sound Transmission Class Rating for Masonry Walls
1207.2.1
*402—2013
Building Code for Masonry Structures
1404.6, 1404.6.2, 1404.10, 1604.3.4, 1705.4, 1705.4.1, 1807.1.6.3.2, 1808.9, 2101.2, 2106.1, 2107.1, 2107.2, 2107.3, 2108.1, 2108.2, 2108.3, 2109.1, 2109.1.1, 2109.2, 2110.1, 2114.1, 2114.4
403—2017
Direct Design Handbook for Masonry Structures
2101.2
404—2016
Standard for the Design of Architectural Cast Stone
2102.2
504—2016
Standard for the Fabrication of Architectural Cast Stone
2103.1
*602—2013
Specification for Masonry Structures
1404.6.1, 1705.4, 1807.1.6.3, 2103.1, 2103.2.1, 2103.3, 2103.4, 2104.1, 2105.1
604—2016
Standard for the Installation of Architectural Cast Stone
2104.1
TPI
Truss Plate Institute
218 N. Lee Street, Suite 312
Alexandria, VA 22314
TPI 1—2014
National Design Standard for Metal-plate-connected Wood Truss Construction
2303.4.6, 2306.1
UL
UL LLC
333 Pfingsten Road
Northbrook, IL 60062-2096
9—2009
Fire Tests of Window Assemblies—with Revisions through February 2015
Table 716.1(1), 716.1.1, 716.1.2.2.2, 716.2.1.3, 716.3.1.1, 716.3.1.2, 716.3.2.1.3, 716.3.4, 1013.5
10A—2009
Tin Clad Fire Doors—with Revisions through December 2013
716.2.1
10B—2008
Fire Tests of Door Assemblies—with Revisions through February 2015
Table 716.1(1), 716.1.1, 716.1.2.2.1, 716.2.1.2, 716.2.2.2, 716.2.2.3.1, 716.2.5.1.1
10C—2009
Positive Pressure Fire Tests of Door Assemblies—with Revisions through February 2015
Table 716.1(1), 716.1.1, 716.1.2.2.1, 716.2.1.1, 716.2.2.1, 716.2.2.2, 716.2.2.3.1, 716.2.5.1.1, 1010.1.10.1
14B—2008
Sliding Hardware for Standard Horizontally Mounted Tin Clad Fire Doors—with Revisions through May 2013
716.2.1
14C—06
Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs—with Revisions through May 2013
716.2.1
55A—04
Materials for Built-up Roof Coverings
1507.10.2
103—2010
Factory-built Chimneys, for Residential Type and Building Heating Appliances—with Revisions through July 2012
718.2.5.1
127—2011
Factory-built Fireplaces—with Revisions through May 2015
718.2.5.1, 2111.12
199E—04
Outline of Investigation for Fire Testing of Sprinklers and Water Spray Nozzles for Protection of Deep Fat Fryers
904.12.4.1
217—06
Single and Multiple Station Smoke Alarms—with Revisions through October 2015
907.2.10
263—11
Fire Tests of Building Construction and Materials—with Revisions through June 2015
703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.4.1, 714.5.1, 715.1, Table 716.1(1), Table 716.1(3), 716.1.2.3, 716.2.5.1.1, 716.2.5.4, 716.3.2.1.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 717.6.2, Table 721.1(1), 2103.1, 2603.5.1
268—09
Smoke Detectors for Fire Alarm Systems
407.9, 907.2.6.2, 907.2.10.7
294—1999
Access Control System Units—with Revisions through February 2015
1010.1.9.7, 1010.1.9.8.1, 1010.1.9.9, 1010.1.9.10
300—05(R2010)
Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment—with Revisions through December 2014
904.12
300A—06
Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces
904.13.1.1
305—2012
Panic Hardware—with Revisions through August 2014
1010.1.10.1
325—02
Door, Drapery, Gate, Louver and Window Operations and Systems—with Revisions through May 2015
406.2.1, 3110.3
555—2006
Fire Dampers—with Revisions through May 2014
717.3.1
555C—2006
Ceiling Dampers—with Revisions through December 2014
717.3.1
555S—99
Smoke Dampers—with Revisions through February 2014
717.3.1
580—2006
Test for Uplift Resistance of Roof Assemblies—with Revisions through October 2013
1504.3.1, 1504.3.2
641—2010
Type L Low-temperature Venting Systems—with Revisions through June 2013
2113.11.1.4
710B—2011
Recirculating Systems—with Revisions through August 2014
904.12
723—2008
Test for Surface Burning Characteristics of Building Materials—with Revisions through August 2013
202, 402.6.4.4, 406.7.2, 703.5.2, 720.1, 720.4, 803.1.2, 803.5.2, 803.10, 803.11, 803.12, 803.13, 806.7, 1402.5, 1403.12.1, 1406.9, 1406.10.1, 1408.9, 1408.10.1, 1510.6.2, 1510.6.3, 2303.2, 2603.3, 2603.4.1.13, 2603.5.4, 2603.5.5, 2603.7, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3
790—04
Standard Test Methods for Fire Tests of Roof Coverings—with Revisions through July 2014
1505.1, 2603.6, 2610.2, 2610.3
793—08
Automatically Operated Roof Vents for Smoke and Heat—with Revisions through September 2011
910.3.1
864—03
Control Units and Accessories for Fire Alarm Systems—with Revisions through December 2014
909.12
924—06
Safety Emergency Lighting and Power Equipment—with Revisions through April 2014
1013.5
1040—96
Fire Test of Insulated Wall Construction—with Revisions through October 2012
1406.10.3, 1408.10.3, 2603.9
1256—02
Fire Test of Roof Deck Construction—with Revisions through July 2013
1508.1, 2603.3, 2603.4.1.5
1479—03
Fire Tests of Penetration Firestops—with Revisions through June 2015
202, 714.4.1.2, 714.4.2, 714.5.1.2, 714.5.4
1482—2011
Solid-fuel Type Room Heaters—with Revisions through August 2015
2112.2, 2112.5
1703—02
Flat-plate Photovoltaic Modules and Panels—with Revisions through October 2015
1505.9, 1507.17.6, 1507.18.5, 1510.7.2, 3111.3.1
1715—97
Fire Test of Interior Finish Material—with Revisions through January 2013
1406.10.3, 1408.10.3, 2603.9, 2614.4
1741—2010
Inverters, Converters, Controllers and Interconnection System Equipment for Use with Distributed Energy Resources—with Revisions through January 2015
3111.3.1
1777—2007
Chimney Liners—with Revisions through October 2015
2113.11.1, 2113.19
1784—01
Air Leakage Tests of Door Assemblies—with Revisions through February 2015
405.4.3, 710.5.2.2, 710.5.2.2.1, 716.2.1.4, 716.2.9.1, 716.2.9.3, 3006.3, 3007.6.3, 3008.6.3
1897—12
Uplift Tests for Roof Covering Systems—with Revisions through September 2015
1504.3.1, 1504.3.3, 1507.18.7
1975—06
Fire Tests for Foamed Plastics Used for Decorative Purposes
402.6.2, 402.6.4.5, 424.2
1994—04
Luminous Egress Path Marking Systems—with Revisions through May 2015
411.6, 1008.2.1, 1025.2.1, 1025.2.3, 1025.2.4, 1025.2.5, 1025.4
2079—04
Tests for Fire Resistance of Building Joint Systems—with Revisions through August 2015
202, 715.3, 715.6
2196—2001
Tests for Fire Resistive Cables—with Revisions through March 2012
909.20.6.1, 913.2.2, 2702.3, 3007.8.1, 3008.8.2
2200—2012
Stationary Engine Generator Assemblies—with Revisions through July 2015
2702.1.1
2202—2009
Electric Vehicle (EV) Charging System Equipment
406.2.7
2594—2013
Electric Vehicle Supply Equipment
406.2.7
2703—2014
Outline of Investigation for Mounting Systems, Mounting Devices, Clamping/Retention Devices and Ground Lugs for Use with Flat-plate Photovoltaic Modules and Panels
1505.9
ULC
Underwriters Laboratories of Canada
13775 Commerce Parkway
Richmond, BC V6V 2V4
CAN/ULC S 102.2—2010
Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies—with 2000 Revisions
720.2, 720.3, 720.4
USC
United States Code
c/o Superintendent of Documents
U.S. Government Printing Office
732 North Capitol Street NW
Washington, DC 20401
18 USC Part 1, Ch.40
Importation, Manufacture, Distribution and Storage of Explosive Materials
202
WCLIB
West Coast Lumber Inspection Bureau
P.O. Box 23145
Portland, OR 97281
*AITC 104—03
Typical Construction Details
2306.1
*AITC 110—01
Standard Appearance Grades for Structural Glued Laminated Timber
2306.1
*AITC 113—10
Standard for Dimensions of Structural Glued Laminated Timber
2306.1
*AITC 119—96
Standard Specifications for Structural Glued Laminated Timber of Hardwood Species
2306.1
*AITC 200—09
Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber
2306.1
WDMA
Window and Door Manufacturers Association
2025 M Street NW, Suite 800
Washington, DC 20036-3309
AAMA/WDMA/CSA 101/I.S.2/A440—17
Specifications for Windows, Doors and Unit Skylights
1709.5.1, 2405.5
WRI
Wire Reinforcement Institute, Inc.
942 Main Street, Suite 300
Hartford, CT 06103
*WRI/CRSI—81
Design of Slab-on-ground Foundations—with 1996 Update
1808.6.2