The standards listed in Table 1701.1 are referenced in various sections of this code and shall be considered part of the requirements of this document. The standards are listed herein by the standard number and effective date, the title, application and the section(s) of this code that reference the standard. The application of the referenced standard(s) shall be as specified in Section 302.1.2.
The promulgating agency acronym referred to in Table 1701.1 are defined in a list found at the end of the table.
TABLE 1701.1 REFERENCED STANDARDS
| STANDARD NUMBER | STANDARD TITLE | APPLICATION | REFERENCED SECTION |
|---|---|---|---|
| AABC-2016 | Total System Balance, 7th Edition | Balancing | 314.1(1) |
| ACCA Manual B-2009 | Balancing and Testing Air and Hydronic Systems | Balancing | 314.1(1) |
| ACCA Manual D-2016 | Residential Duct Systems | Ducts, Balancing | 601.2 |
| ACCA 4 QM-2013 | Maintenance of Residential HVAC Systems | HVAC Systems | 102.3.2 |
| AHRI 700-2016a | Specifications for Refrigerants | Refrigerants | 1104.7, 1104.7.3 |
| AMCA 540-2013 | Louvers Impacted by Wind Borne Debris | Louvers | 315.1.2 |
| AMCA 550-2015 | Test Method for High Velocity Wind Driven Rain Resistance Louvers | Louvers | 315.1.1 |
| ASHRAE 15-2016 | Safety Standard for Refrigeration Systems | Refrigeration Systems | 1102.1, 1106.1, Table 1113.5 |
| ASHRAE 34-2016 | Designation and Safety Classification of Refrigerants | Refrigeration Classifications | 1102.3, 1103.1, Table 1102.3, Table 1106.2.5.2 |
| ASHRAE 62.1-2016 | Ventilation for Acceptable Indoor Air Quality | Indoor Air Quality Ventilation | 402.4.1 |
| ASHRAE 62.2-2016 | Ventilation and Acceptable Indoor Air Quality in Residential Buildings | Ventilation | 402.1.2 |
| ASHRAE 111-2008 | Measurement, Testing, Adjusting, and Balancing of Building HVAC Systems | Balancing | 314.1(3) |
| ASHRAE 129-1997 (R2002) | Measuring Air-Change Effectiveness | Air Change Effectiveness | Table 403.2.2 |
| ASHRAE 154-2016 | Ventilation for Commercial Cooking Operations | Commercial Kitchens | 510.5.6 |
| ASHRAE 170-2013 | Ventilation of Health Care Facilities | Ventilation | 402.1.3 |
| ASHRAE/ACCA 180-2012 | Inspection and Maintenance of Commercial Building HVAC Systems | Maintenance | 102.3.1, 1013.3 |
| ASHRAE Handbook-2013 | Fundamentals | Climatic Conditions | Figure 803.1.2(6) |
| ASME B1.20.1-2013 | Pipe Threads, General Purpose (Inch) | Joints | 1211.2(3), 1211.4(7), 1211.11(3), 1211.12(2), 1308.5.7 |
| ASME B16.1-2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 | Fittings | 1308.5.10 |
| ASME B16.3-2011 | Malleable Iron Threaded Fittings: Classes 150 and 300 | Fittings | Table 1210.1 |
| ASME B16.5-2013 | Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch | Fittings | Table 1210.1, 1308.5.10.1 |
| ASME B16.9-2012 | Factory-Made Wrought Buttwelding Fittings | Fittings | Table 1210.1 |
| ASME B16.11-2011 | Forged Fittings, Socket-Welding and Threaded | Fittings | Table 1210.1 |
| ASME B16.15-2013 | Cast Copper Alloy Threaded Fittings: Classes 125 and 250 | Fittings | Table 1210.1 |
| ASME B16.18-2012 | Cast Copper Alloy Solder Joint Pressure Fittings | Fittings | Table 1210.1 |
| ASME B16.20-2012 | Metallic Gaskets for Pipe Flanges: Ring- Joint, Spiral-Wound, and Jacketed | Joints | 1308.5.11.2 |
| ASME B16.21 -2011 | Nonmetallic Flat Gaskets for Pipe Flanges | Fuel Gas Piping | 1308.5.11.3 |
| ASME B16.22-2013 | Wrought Copper and Copper Alloy Solder- Joint Pressure Fittings | Fittings | Table 1210.1 |
| ASME B16.23-2011 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | Fittings | Table 1210.1 |
| ASME B16.24-2011 | Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500 | Fittings | Table 1210.1, 1308.5.10.2 |
| ASME B16.26-2013 | Cast Copper Alloy Fittings for Flared Copper Tubes | Fittings | Table 1210.1 |
| ASME B16.29-2012 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings — DWV | Fittings | Table 1210.1 |
| ASME B16.42-2011 | Ductile Iron Pipe Flanges and Flanged Fittings | Fuel Gas Piping | 1308.5.10.3 |
| ASME B16.47-2011 | Large Diameter Steel Flanges | Fuel Gas Piping | 1308.5.10.1 |
| ASME B16.51-2013 | Copper and Copper Alloy Press-Connect Pressure Fittings | Fittings | Table 1210.1 |
| ASME B31.5-2016 | Refrigeration Piping and Heat Transfer Components | Refrigeration Piping | 1109.1.1, 1109.1.3 |
| ASME B36.10M-2015 | Welded and Seamless Wrought Steel Pipe | Fuel Gas Piping | 1308.5.2.1(1) |
| ASME BPVC Section I-2015 | Rules for Construction of Power Boilers | Boilers | 1002.1(1), Table 1003.2.1 |
| ASME BPVC Section IV- 2015 | Rules for Construction of Heating Boilers | Boilers | 1002.1(2) |
| ASME BPVC Section VIII- 2015 | Rules for Construction of Pressure Vessels Division 1 | Pressure Vessels | 1002.1, 1004.3, 1112.10.1, 1112.13, 1113.1, 1115.4, 1115.4.1, 1117.1(2), 1117.1(3), 1117.2, 1209.4 |
| ASME CSD-1-2015 | Controls and Safety Devices for Automatically Fired Boilers | Boilers | 1003.2.1 |
| ASSE 1013-2011 | Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers | Backflow Protection | 1202.2 |
| ASSE 1017-2009 | Temperature Actuated Mixing Valves for Hot Water Distribution Systems | Valves | 1207.3.1 |
| ASSE 1061-2015 | Push-Fit Fittings | Fittings | 1211.2(1), 1211.4(5), Table 1210.1 |
| ASTM A53/A53M-2012 | Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | Piping | 1308.5.2.1(2), Table 1210.1 |
| ASTM A106/A106M-2015 | Seamless Carbon Steel Pipe for High-Temperature Service | Piping | 1308.5.2.1(3), Table 1210.1 |
| ASTM A126-2004 (R2014) | Gray Iron Castings for Valves, Flanges, and Pipe Fittings | Piping | Table 1210.1 |
| ASTM A254/A254M-2012 | Copper-Brazed Steel Tubing | Piping | 1308.5.3.1, Table 1210.1 |
| ASTM A420/A420M-2016 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | Fittings | Table 1210.1 |
| ASTM B32-2008 (R2014) | Solder Metal | Joints | 1211.4(6) |
| ASTM B42-2015a | Seamless Copper Pipe, Standard Sizes | Piping | Table 1210.1 |
| ASTM B43-2015 | Seamless Red Brass Pipe, Standard Sizes | Piping | Table 1210.1 |
| ASTM B75/B75M-2011 | Seamless Copper Tube | Piping | Table 1210.1 |
| ASTM B88-2016 | Seamless Copper Water Tube | Piping | 1308.5.3.2, Table 1210.1 |
| ASTM B135-2010 | Seamless Brass Tube | Piping | Table 1210.1 |
| ASTM B210-2012 | Aluminum and Aluminum-Alloy Drawn Seamless Tubes | Piping | 1308.5.3.3 |
| ASTM B241/B241M-2016 | Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube | Piping | 1308.5.2.3, 1308.5.3.3 |
| ASTM B251-2010 | General Requirements for Wrought Seamless Copper and Copper-Alloy Tube | Piping | Table 1210.1 |
| ASTM B280-2016 | Seamless Copper Tube for Air Conditioning and Refrigeration Field Service | Piping | 1109.1.2, 1308.5.3.2 |
| ASTM B302-2012 | Threadless Copper Pipe, Standard Sizes | Piping | Table 1210.1 |
| ASTM B447-2012a | Welded Copper Tube | Piping | Table 1210.1 |
| ASTM B813-2016 | Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube | Joints | 1211.4(6) |
| ASTM B828-2016 | Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings | Joints | 1211.4(6) |
| ASTM B1003-2016 | Seamless Copper Tube for Linesets | Piping | 1109.1.2 |
| ASTM C315-2007 (R2016) | Clay Flue Liners and Chimney Pots | Venting Systems | 803.1.11.1 |
| ASTM C411-2011 | Hot-Surface Performance of High-Temperature Thermal Insulation | Duct Coverings and Linings | 604.1.2 |
| ASTM D1693-2015 | Environmental Stress-Cracking of Ethylene Plastics | Piping | Table 1210.1 |
| ASTM D1785-2015 | Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 | Piping | Table 1210.1 |
| ASTM D2241-2015 | Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) | Piping | Table 1210.1 |
| ASTM D2464-2015 | Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 | Fittings | Table 1210.1 |
| ASTM D2466-2015 | Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 | Fittings | Table 1210.1 |
| ASTM D2467-2015 | Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 | Fittings | Table 1210.1 |
| ASTM D2513-2014el | Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings | Piping | 1308.5.4, 1308.5.4.2.2, 1308.5.9.2, 1310.1.7.1(1), Table 1210.1 |
| ASTM D2564-2012 | Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems | Joints | 1211.11(2) |
| ASTM D2609-2015 | Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe | Fittings | Table 1210.1 |
| ASTM D2683-2014 | Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing | Fittings | Table 1210.1 |
| ASTM D2737-2012a | Polyethylene (PE) Plastic Tubing | Piping, Plastic | Table 1210.1 |
| ASTM D2846/D2846M-2014 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems | Piping | 1211.2(2), 1211.3(2), Table 1210.1 |
| ASTM D3035-2015 | Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter | Piping | Table 1210.1 |
| ASTM D3139-1998 (R2011) | Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals | Joints | 1211.11(1) |
| ASTM D3261-2016 | Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing | Fittings | Table 1210.1 |
| ASTM D3350-2014 | Polyethylene Plastics Pipe and Fittings Materials | Piping, Fittings | Table 1210.1 |
| ASTM E84-2016 | Surface Burning Characteristics of Building Materials | Miscellaneous | 508.3.4, 602.2, 604.1.2, 1201.2 |
| ASTM E814-2013a | Fire Tests of Penetration Firestop Systems | Miscellaneous | 507.4.4, 507.4.5 |
| ASTM E2231-2015 | Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics | Insulation of Ducts | 604.1.2 |
| ASTM E2336-2016 | Fire Resistive Grease Duct Enclosure Systems | Grease Ducts | 507.4.2.2, 507.4.5 |
| ASTM F437-2015 | Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 | Fittings | Table 1210.1 |
| ASTM F438-2015 | Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 | Fittings | Table 1210.1 |
| ASTM F439-2013 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 | Fittings | Table 1210.1, 1211.2 |
| ASTM F441/F441M-2015 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 | Piping | Table 1210.1 |
| ASTM F442/442M-2013e1 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) | Piping | Table 1210.1, 1211.2(2) |
| ASTM F493-2014 | Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings | Joints | 1211.2(2), 1211.3(2) |
| ASTM F656-2015 | Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings | Joints | 1211.2(2), 1211.3(2), 1211.11(2) |
| ASTM F714-2013 | Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter | Piping, Plastic | Table 1210.1 |
| ASTM F876-2015a | Crosslinked Polyethylene (PEX) Tubing | Piping | 1211.5, Table 1210.1 |
| ASTM F877-2011a | Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems | Piping | Table 1210.1 |
| ASTM F1055-2016a | Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing | Fittings | Table 1210.1 |
| ASTM F1281 -2011 | Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe | Piping | Table 1210.1 |
| ASTM F1282-2010 | Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe | Piping | Table 1210.1 |
| ASTM F1807-2015 | Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing | Fittings | Table 1210.1 |
| ASTM F1960-2015 | Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing | Fittings | Table 1210.1 |
| ASTM F1961-2009 | Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing | Fittings | Table 1210.1 |
| ASTM F1970-2012el | Special Engineered Fittings, Appurtenances or Valves for Use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems | Piping | Table 1210.1 |
| ASTM F1973-2013el | Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems | Fuel Gas | 1310.1.7.1(2) |
| ASTM F1974-2009 (R2015) | Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Poly-ethylene/Aluminum/ Crosslinked Polyethylene Composite Pressure Pipe | Fittings | 1211.6(1), 1211.8(1), Table 1210.1 |
| ASTM F2080-2016 | Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe | Fittings | Table 1210.1 |
| ASTM F2098-2015 | Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings | Joints | Table 1210.1 |
| ASTM F2159-2014 | Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing | Fittings | Table 1210.1 |
| ASTM F2262-2009 | Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 | Piping, Plastic | Table 1210.1 |
| ASTM F2389-2015 | Pressure-Rated Polypropylene (PP) Piping Systems | Piping | 1211.10(1), Table 1210.1 |
| ASTM F2434-2014 | Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing | Fittings | 1211.6(1), Table 1210.1 |
| ASTM F2509-2015 | Field-Assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing | Fuel Gas | 1310.1.7.1(3) |
| ASTM F2620-2013 | Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings | Joints | 1211.7(1), 1211.7(3) |
| ASTM F2623-2014 | Polyethylene of Raised Temperature (PE-RT) SDR9 Tubing | Piping | Table 1210.1 |
| ASTM F2735-2009 (R2016) | Plastic Insert Fittings for SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing | Fittings | Table 1210.1 |
| ASTM F2769-2016 | Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems | Piping, Fittings | Table 1210.1 |
| ASTM F2855-2012 | Specification for Chlorinated Poly (Vinyl Chloride)/Aluminum/Chlorinated Poly (Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing | Piping, Plastic | Table 1210.1 |
| AWS A5.8-2011 | Filler Metals for Brazing and Braze Welding | Joints | 1211.4(1) |
| AWWA C110-2012 | Ductile-Iron and Gray-Iron Fittings | Fittings | Table 1210.1 |
| AWWA C111-2012 | Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings | Joints | 1211.7 |
| AWWA C115-2011 | Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Treaded Flanges | Piping | Table 1210.1 |
| AWWA C151-2009 | Ductile-Iron Pipe, Centrigugally Cast | Piping, Ferrous | Table 1210.1 |
| AWWA C153-2011 | Ductile-Iron Compact Fittings | Fittings | Table 1210.1 |
| AWWA C901-2008 | Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in. (13 mm) Through 3 in. (76 mm) for Water Service | Piping, Plastic | Table 1210.1 |
| CSA B137.1-2013 | Polyethylene (PE) Pipe, Tubing, and Fittings for Cold-Water Pressure Services | Piping | Table 1210.1 |
| CSA B137.2-2013 | Polyvinylchloride (PVC) Injection-Moulded Gasketed Fittings for Pressure Applications | Piping, Plastic | Table 1210.1 |
| CSA B137.3-2013 | Rigid Polyvinylchloride (PVC) Pipe and Fittings for Pressure Applications | Piping, Plastic | Table 1210.1 |
| CSA B137.5-2013 | Crosslinked Polyethylene (PEX) Tubing Systems for Pressure Applications | Piping | Table 1210.1 |
| CSA B137.6-2013 | Chlorinated Polyvinylchloride (CPVC) Pipe, Tubing, and Fittings for Hot-and Cold-Water Distribution Systems | Piping, Plastic | Table 1210.1 |
| CSA B137.9-2013 | Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems | Piping | Table 1210.1 |
| CSA B137.10-2013 | Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Composite Pressure-Pipe Systems | Piping | Table 1210.1 |
| CSA B137.11-2013 | Polypropylene (PP-R) Pipe and Fittings for Pressure Applications | Piping | 1211.10(1) |
| CSA B137.18-2013 | Polyethylene of Raised Temperature Resistance (PE-RT) Tubing Systems for Pressure Applications | Piping, Plastic | Table 1210.1 |
| CSA FC 1-2014 | Fuel Cell Technologies-Part 3-100: Stationary Fuel Cell Power Systems-Safety | Fuel Cell Power Plants | 1601.1 |
| CSA LC 1-2016 | Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (same as CSA 6.26) | Fuel Gas | 1308.5.3.4 |
| CSA LC 4a-2013 | Press-Connect Metallic Fittings For Use in Fuel Gas Distribution Systems (same as CSA 6.32a) | Fuel Gas | 1308.5.8.1, 1308.5.8.2 |
| CSA Z21.8-1994 (R2012) | Installation of Domestic Gas Conversion Burners | Fuel Gas, Appliances | 909.1 |
| CSA Z21.10.1-2014 | Gas Water Heaters-Volume I, Storage Water Heaters with Input Ratings of 75,000 Btu Per Hour or Less (same as CSA 4.1) | Fuel Gas, Appliances | Table 1203.2 |
| CSA Z21.10.3-2015 | Gas-Fired Water Heaters, Volume III, Storage Water Heaters with Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous (same as CSA 4.3) | Fuel Gas, Appliances | Table 1203.2 |
| CSA Z21.24-2015 | Connectors for Gas Appliances (same as CSA 6.10) | Fuel Gas | 1312.1(3), 1312.2 |
| CSA Z21.41-2014 | Quick Disconnect Devices for Use with Gas Fuel Appliances (same as CSA 6.9) | Fuel Gas | 1312.7 |
| CSA Z21.54-2014 | Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4) | Fuel Gas | 1312.3.2 |
| CSA Z21.69-2015 | Connectors for Moveable Gas Appliances (same as CSA 6.16) | Fuel Gas | 1312.1.1 |
| CSA Z21.75-2016 | Connectors for Outdoor Gas Appliances and Manufactured Homes (same as CSA 6.27) | Appliances | 1312.1(4) |
| CSA Z21.80a-2012 | Line Pressure Regulators (same as CSA 6.22a) | Fuel Gas | 1308.7.1, 1308.7.4(1) |
| CSA Z21.90-2015 | Gas Convenience Outlets and Optional Enclosures (same as CSA 6.24) | Gas Outlets | 1312.8 |
| CSA Z21.93-2013 | Excess Flow Valves for Natural and LP Gas with Pressures up to 5 psig (same as CSA 6.30) | Fuel Gas | 1309.1 |
| CSA Z83.4-2015 | Non-Recirculating Direct Gas-Fired Industrial Air Heaters (same as CSA 3.7) | Air Heaters, Non-Recirculating, Non-Recirculating Heaters | 914.1 |
| CSA Z83.18-2015 | Recirculating Direct Gas-Fired Industrial Air Heaters | Air Heaters, Industrial Heaters, Recirculating | 915.1 |
| IIAR 2-2014 | Standard for the Safe Design of Closed-Circuit Ammonia Refrigeration Systems | Ammonia Refrigeration Systems | 1102.2 |
| IIAR 3-2012 | Ammonia Refrigeration Valves | Ammonia Refrigeration Systems | 1102.2 |
| IIAR 4-2015 | Installation of Closed-Circuit Ammonia Refrigeration Systems | Ammonia Refrigeration | 1102.2 |
| IIAR 5-2013 | Start-Up and Commissioning of Closed Circuit Ammonia Refrigeration Systems | Ammonia Refrigeration Systems | 1102.2 |
| MSS SP-58-2009 | Pipe Hangers and Supports-Materials, Design, Manufacture, Selection, Application, and Installation | Miscellaneous | 1310.2.4 |
| NEBB-2015 | Procedural Standard for Testing, Adjusting and Balancing of Environmental Systems, 8th Edition | Balancing | 314.1(4) |
| NFPA 2-2016 | Hydrogen Technologies Code | Gaseous Hydrogen Systems | 937.1 |
| NFPA 10-2013 | Portable Fire Extinguishers | Fire Extinguishing | 513.11, 513.11.1, 513.12, 517.7.4 |
| NFPA 12-2015 | Carbon Dioxide Extinguishing Systems | Fire Extinguishing | 513.2.3(1) |
| NFPA 13-2016 | Installation of Sprinkler Systems | Miscellaneous | 513.2.3(2), 517.7.6 |
| NFPA 17-2017 | Dry Chemical Extinguishing Systems | Fire Extinguishing | 513.2.3(3), 513.3.2 |
| NFPA 17A-2017 | Wet Chemical Extinguishing Systems | Fire Extinguishing | 513.2.3(4), 513.3.2 |
| NFPA 30A-2015 | Motor Fuel Dispensing Facilities and Repair Garages | Miscellaneous | 303.11.1 |
| NFPA 31-2016 | Installation of Oil-Burning Equipment | Fuel Gas, Appliances | 301.5, 1002.2.2, 1301.1 |
| NFPA 37-2015 | Installation and Use of Stationary Combustion Engines and Gas Turbines | Generators | 1602.1, 1602.3 |
| NFPA 51-2013 | Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes | Fuel Gas Systems | 902.7 |
| NFPA 52-2016 | Vehicular Natural Gas Fuel Systems Code | CNG Vehicle Fuel Systems | 938.1 |
| NFPA 54/Z223.1-2015 | National Fuel Gas Code | Fuel Gas | 516.2.1 |
| NFPA 58-2017 | Liquefied Petroleum Gas Code | Fuel Gas | 303.7, 516.2.1, 1308.5.4.2.3, 1308.5.9.4, 1310.5(6), 1312.11 |
| NFPA 68-2013 | Explosion Protection by Deflagration Venting | Product Conveying Ducts | 505.3.3 |
| NFPA 69-2014 | Explosion Prevention Systems | Explosion Prevention | 505.3.1 |
| NFPA 70-2017 | National Electrical Code | Miscellaneous | 301.4, 511.1.6, 512.2.5, 516.2.7, 516.2.9(4), 602.2.1, 905.8.2, 1104.4(6), 1107.1.7, 1107.1.8, 1217.6.1, 1310.14.5(2), 1311.2.4, 1311.6 |
| NFPA 80-2016 | Fire Doors and Other Opening Protectives | Fire Doors | 510.7.7 |
| NFPA 82-2014 | Incinerators and Waste and Linen Handling Systems and Equipment | Incinerator Chutes | 802.2.8, Table 802.4, 925.1, |
| NFPA 85-2015 | Boiler and Combustion Systems Hazards Code | Appliances | 1002.1(3), 1011.1, Table 1003.2.1 |
| NFPA 86-2015 | Ovens and Furnaces | Product Conveying Ducts | 505.3.2 |
| NFPA 88A-2015 | Parking Structures | Miscellaneous | 303.11 |
| NFPA 90A-2015 | Installation of Air-Conditioning and Ventilating Systems | HVAC | 904.7 |
| NFPA 90B-2015 | Installation of Warm Air Heating and Air-Conditioning Systems | HVAC | 904.7 |
| NFPA 96-2014 | Ventilation Control and Fire Protection of Commercial Cooking Operations | Commercial Cooking | 922.4 |
| NFPA 211-2016 | Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances | Fuel Gas Appliances | 517.7, 517.7.1, 801.2, 801.3, 802.5.2, 802.5.3, 802.5.7.1, 802.5.7.3, 902.10 |
| NFPA 221-2015 | High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls | Building Fire Walls, Fire Barrier | 506.3 |
| NFPA 262-2015 | Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces | Certification | 602.2.1 |
| NFPA 409-2016 | Aircraft Hangars | Miscellaneous | 303.12 |
| NFPA 654-2017 | Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids | Dust Explosion Prevention, Gutters | 506.6, Table 505.9 |
| NFPA 780-2017 | Installation of Lightning Protection Systems | Fuel Gas | 1311.4 |
| NFPA 853-2015 | Installation of Stationary Fuel Cell Power Systems | Fuel Cell Power Plants, Fuel Cells | 1601.1 |
| NFPA 1192-2015 | Recreational Vehicles | Fuel Gas Piping | 1302.3 |
| NSF 358-1-2014 | Polyethylene Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems | Piping, Plastic | Table 1210.1 |
| NSF 358-2-2012 | Polypropylene Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems | Piping, Plastic | Table 1210.1 |
| NSF 358-3-2016 | Cross-linked polyethylene (PEX) pipe and fittings for water-based ground-source (geothermal) heat pump systems | Piping, Plastic | Table 1210.1 |
| SMACNA-2002 | HVAC Systems Testing, Adjusting and Balancing, 3rd Edition | Balancing | 314.1(5) |
| SMACNA-2006 | HVAC Duct Construction Standards Metal and Flexible, 3rd Edition | Ducts, Metal and Flexible | 504.4.5, 506.2, 602.3, 603.3, 603.4, 603.5, 603.8, 603.10, 603.12, 604.1 |
| SMACNA-2012 | HVAC Air Duct Leakage Test Manual, 2nd Edition | Ducts | 603.10.1 |
| SMACNA-2015 | Phenolic Duct Construction Standards | Duct Systems | 602.4 |
| UL 17-2008 | Vent or Chimney Connector Dampers for Oil-Fired Appliances (with revisions through September 25, 2013) | Vent Dampers | 802.15.1 |
| UL 103-2010 | Factory-Built Chimneys for Residential Type and Building Heating Appliances (with revisions through July 27, 2012) | Fuel Gas, Appliances | 802.5.1.1, 802.5.1.2 |
| UL 127-2011 | Factory-Built Fireplaces (with revisions through July 27. 2016) | Fireplaces | 802.5.1.1, 913.1, 913.1.1 |
| UL 181-2013 | Factory-Made Air Ducts and Air Connectors | Air Connectors, Air Ducts | 602.6, 603.4, 603.5, 603.8, 604.1.1 |
| UL 181A-2013 | Closure Systems for Use with Rigid Air Ducts | Air Ducts | 603.10, Table 603.10 |
| UL 181B-2013 | Closure Systems for Use with Flexible Air Ducts and Air Connectors | Air Connectors, Air Ducts | 603.10, Table 603.10 |
| UL 197-2010 | Commercial Electric Cooking Appliances (with revisions through September 17, 2014) | Appliances, Commercial Cooking, Electric Appliances | 921.1 |
| UL 207-2009 | Refrigerant-Containing Components and Accessories, Nonelectrical (with revisions through June 27, 2014) | Refrigeration Components | 1109.2 |
| UL 268A-2008 | Smoke Detectors for Duct Application (with revisions through August 12, 2016) | Smoke Detectors | 608.1 |
| UL 295-2007 | Commercial-Industrial Gas Burners (with revisions through January 30, 2015) | Gas Burners | 910.2 |
| UL 296-2003 | Oil Burners (with revisions through June 11, 2015) | Fuel Gas, Appliances | 910.1 |
| UL 300-2005 | Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment (with revisions through December 16, 2014) | Certification | 513.2.2, 513.2.5, 517.3.1.1(6) |
| UL 378-2006 | Draft Equipment (with revisions through September 17, 2013) | Fuel Gas, Appliances | 802.15.1 |
| UL 391-2010 | Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces (with revisions through June 12, 2014) | Furnaces, Solid Fuel | 904.11 |
| UL 412-2011 | Refrigeration Unit Coolers (with revisions through September 17, 2013) | Refrigeration | 934.2 |
| UL 427-2011 | Refrigerating Units (with revisions through February 28, 2014) | Refrigeration Systems | 934.3 |
| UL 441-2016 | Gas Vents (with revisions through July 27, 2016) | Fuel Gas | 802.1 |
| UL 467-2013 | Grounding and Bonding Equipment | Grounding and Bonding | 1311.2.5 |
| UL 471-2010 | Commercial Refrigerators and Freezers (with revisions December 8, 2016) | Freezers, Refrigerators | 934.1 |
| UL 499-2014 | Electric Heating Appliances | Kilns | 931.4 |
| UL 555-2006 | Fire Dampers (with revisions through October 21, 2016) | Dampers | 605.2 |
| UL 555C-2014 | Ceiling Dampers | Dampers | 605.3 |
| UL 555S-2014 | Smoke Dampers (with revisions through October 27, 2016) | Dampers | 605.1 |
| UL 641-2010 | Type L Low-Temperature Venting Systems (with revisions through June 12, 2013) | Equipment | 802.1 |
| UL 651-2011 | Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings (with revisions through June 15, 2016) | Piping, Plastic | 1308.5.4.1 |
| UL 705-2004 | Power Ventilators (with revisions through December 17, 2013) | Power Ventilators | 504.4.2.3 |
| UL 710-2012 | Exhaust Hoods for Commercial Cooking Equipment (with revisions through November 5, 2013) | Exhaust Hoods, Hoods | 507.3.1, 508.2, 508.2.1 |
| UL 710B-2011 | Recirculating Systems (with revisions through August 14, 2014) | Exhaust Hoods | 508.1, 513.2.2, 516.2.2, 516.2.3 |
| UL 710C-2006 | Ultraviolet Radiation Systems For Use In The Ventilation Control of Commercial Cooking Operations | Exhaust Hoods, Hoods | 508.2.1 |
| UL 723-2008 | Test for Surface Burning Characteristics of Building Materials (with revisions through August 12, 2013) | Miscellaneous | 508.3.4, 602.2, 604.1.2, 1201.2 |
| UL 726-1995 | Oil-Fired Boiler Assemblies (with revisions through October 9, 2013) | Fuel Gas, Appliances | 1002.2.1 |
| UL 727-2006 | Oil-Fired Central Furnaces (with revisions through October 9, 2013) | Fuel Gas, Appliances | 904.12 |
| UL 729-2003 | Oil-Fired Floor Furnaces (with revisions through November 22, 2016) | Furnaces, Floor, Oil Fired Furnaces | 906.13 |
| UL 730-2003 | Oil-Fired Wall Furnaces (with revisions through November 22, 2016) | Furnaces, Wall, Oil Fired | 907.4 |
| UL 731-1995 | Oil-Fired Unit Heaters (with revisions through November 22, 2016) | Heaters, Oil Fired | 917.6 |
| UL 737-2011 | Fireplace Stoves (with revisions through August 19, 2015) | Fireplace Stoves | 913.2 |
| UL 762-2013 | Power Roof Ventilators for Restaurant Exhaust Appliances | Ventilators | 511.1 |
| UL 778-2016 | Motor Operater Water Pumps (with revisions through February 22, 2017) | Pumps | 1208.1 |
| UL 791-2006 | Residential Incinerators (with revisions through November 7, 2014) | Incinerators | 925.3 |
| UL 795-2016 | Commercial-Industrial Gas Heating Equipment | Heating Equipment, Gas Fired | 904.13 |
| UL 834-2004 | Heating, Water Supply, and Power Boilers -Electric (with revisions through December 9, 2013) | Appliances | 1002.3, Table 1203.2 |
| UL 858-2014 | Household Electric Ranges (with revisions through April 6, 2016) | Electric Ranges, Ranges | 920.1 |
| UL 867-2011 | Electrostatic Air Cleaners (with revisions through September 16, 2016) | Filters | 936.1 |
| UL 896-1993 | Oil-Burning Stoves (with revisions through November 22, 2016) | Stoves, Oil Fired | 921.3 |
| UL 900-2015 | Air Filter Units | Air Filters, Filters | 311.2 |
| UL 907-2016 | Fireplace Accessories | Fireplace Accessories | 913.3 |
| UL 921-2016 | Commercial Dishwashers | Appliances | 519.1 |
| UL 923-2013 | Microwave Cooking Appliances (with revisions through November 18, 2015) | Microwaves | 920.3.2(3) |
| UL 959-2010 | Medium Heat Appliance Factory-Built Chimneys (with revisions through June 12, 2014) | Fuel Gas, Appliances | 802.5.1.2 |
| UL 1046-2010 | Grease Filters for Exhaust Ducts (with revisions through January 13, 2012) | Filters-Grease | 509.1, 509.1.1, 518.1(4) |
| UL 1240-2005 | Electric Commercial Clothes-Drying Equipment (with revisions through October 17, 2012) | Clothes Dryers, Commercial | 908.1 |
| UL 1479-2015 | Fire Tests of Penetration Firestops | Miscellaneous | 507.4.4, 507.4.5 |
| UL 1482-2011 | Solid-Fuel Type Room Heaters (with revisions through August 19, 2015) | Room Heaters, Solid Fuel Heaters | 802.5.1.1, 916.3 |
| UL 1777-2015 | Chimney Liners | Chimneys, Liners | 803.1.11.2 |
| UL 1812-2013 | Ducted Heat Recovery Ventilators (with revisions through April 17, 2014) | Heat Recovery Ventilators | 504.5 |
| UL 1815-2012 | Nonducted Heat Recovery Ventilators (with revisions through April 17, 2014) | Heat Recovery Ventilators | 504.5 |
| UL 1820-2004 | Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics (with revisions through May 10, 2013) | Surface Burning Test, Pneumatic Tubing | 602.2.3 |
| UL 1887-2004 | Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics (with revisions through May 3, 2013) | Surface Burning Test, Fire Sprinkler Pipe | 602.2.2 |
| UL 1963-2011 | Refrigerant Recovery/Recycling Equipment (with revisions through October 11, 2013) | Refrigerant Equipment | 1101.2 |
| UL 1978-2010 | Grease Ducts (with revisions through September 19, 2013) | Ducts, Grease | 507.3.1, 510.4.1, 510.5.2, 510.5.3 |
| UL 1995-2015 | Heating and Cooling Equipment | HVAC, Electric | 903.1, 904.14 |
| UL 1996-2009 | Electric Duct Heaters (with revisions through June 13, 2014) | Duct Heaters | 905.8 |
| UL 2021-2015 | Fixed and Location-Dedicated Electric Room Heaters | Product, Heating, Electric | 916.1 |
| UL 2043-2013 | Fire Test for Heat and Visible Smoke Release For Discrete Products and Their Accessories Installed in Air-Handling Spaces | Surface Burning Test, Discrete Products | 602.2.4 |
| UL 2158-2015 | Electric Clothes Dryers | Clothes Dryers, Electric | 908.1 |
| UL 2158A-2013 | Clothes Dryer Transition Duct | Clothes Dryer Exhaust | 504.4 |
| UL 2162-2014 | Commercial Wood-Fired Baking Ovens-Refractory Type | Baking Ovens | 921.2 |
| UL 2200-2012 | Stationary Engine Generator Assemblies (with revisions through July 29, 2015) | Assemblies | 1602.3 |
| UL 2221-2010 | Tests of Fire Resistive Grease Duct Enclosure Assemblies | Duct Wrap, Grease Duct Enclosure | 507.4.4 |
| UL 2518-2005 | Outline of Investigation for Air Dispersion Systems Materials | Duct Systems | 603.13 |
| UL 2523-2009 | Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers (with revisions through February 8, 2013) | Appliances | 1002.4, Table 1203.2 |
| UL 2790-2010 | Commercial Incinerators (with revisions through October 8, 2014) | Incinerators | 925.2 |
| UL 60335-2-40-2012 | Household and Similar Electrical Appliances, Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers | Appliances | 903.1 |
The standards, publications, practices and guides listed in Table 1701.2 are not referenced in other sections of this code. The application of the referenced standards, publications, practices and guides shall be as specified in Section 302.1.2. The promulgating agency acronyms are found at the end of the table.
TABLE 1701.2 STANDARDS, PUBLICATIONS, PRACTICES, AND GUIDES
| DOCUMENT NUMBER | DOCUMENT TITLE | APPLICATION |
|---|---|---|
| ACCA Manual J-2016 | Residential Load Calculations | Ducts |
| ACCA Manual N-2012 | Commercial Load Calculations | Ducts |
| ACCA Manual Q-1990 | Low Pressure, Low Velocity Duct System Design | Ducts |
| AHRI 1200-2013 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Commercial Refrigerated Display Merchandisers and Storage Cabinets |
| AHRI 1230-2010a | Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment | Refrigerants |
| AMCA 500-D-2012 | Laboratory Methods of Testing Dampers for Rating | Dampers |
| ASCE 25-2016 | Earthquake-Actuated Automatic Gas Shutoff Devices | Fuel Gas |
| ASHRAE 52.2-2012 | General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size | Cleaning Devices |
| ASHRAE 55-2013 | Thermal Environmental Conditions for Human Occupancy | Miscellaneous |
| ASHRAE 90.1-2016 | Energy Standard for Buildings Except Low-Rise Residential Buildings | Energy |
| ASHRAE 90.2-2007 | Energy-Efficient Design of Low-Rise Residential Buildings | Energy, Dwellings |
| ASHRAE 127-2012 | Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners | Air Conditioners |
| ASHRAE/ACCA 183-2007 (R2014) | Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings | Cooling and Heating Load, Miscellaneous |
| ASHRAE Handbook-2012 | HVAC Systems and Equipment | Design |
| ASME A13.1-2007 (R2013) | Scheme for the Identification of Piping Systems | Piping |
| ASME A112.18.6/CSA B125.6-2009 (R2014) | Flexible Water Connectors | Piping |
| ASME B1.20.3-1976 (R2013) | Dryseal Pipe Threads (Inch) | Joints |
| ASME B16.33-2012 | Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2) | Valves |
| ASME B16.50-2013 | Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings | Fittings |
| ASTM A312/A312M-2016a | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | Piping, Ferrous |
| ASTM A568/A568M-2015 | Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | Piping |
| ASTM A653/A653M-2015el | Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvan-nealed) by the Hot-Dip Process | Piping, Ferrous |
| ASTM A733-2015 | Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | Piping, Ferrous |
| ASTM B370-2012 | Standard Specification for Copper Sheet and Strip for Building Construction | Miscellaneous |
| ASTM B687-1999 (R2016) | Brass, Copper, and Chromium-Plated Pipe Nipples | Piping, Copper Alloy |
| ASTM C518-2015 | Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | Certification: Calibration, Error Analysis, Heat Flow Meter Apparatus, Heat Flux, Instrument Verification, Thermal Conductivity, Thermal Resistance, Thermal Testing, Tunnel Test |
| ASTM D93-2016a | Flash Point by Pensky-Martens Closed Cup Tester | Certification |
| ASTM D396-2016 | Fuel Oils | Boiler |
| ASTM D2517-2006 (R2011) | Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | Piping, Plastic |
| ASTM E96/E96M-2016 | Water Vapor Transmission of Materials | Miscellaneous |
| ASTM E136-2016a | Behavior of Materials in a Vertical Tube Furnace at 750°C | Furnace |
| ASTM F1476-2007 (R2013) | Performance of Gasketed Mechanical Couplings for Use in Piping Applications | Joints |
| ASTM F2158-2008 (R2016) | Residential Central-Vacuum Tube and Fittings | Central Vacuum, Fittings, PVC, Tube |
| AWS B2.4-2012 | Welding Procedure and Performance Qualification for Thermoplastics | Joints, Certification |
| CSA C448-2016 | Design and Installation of Ground Source Heat Pump Systems for Commercial and Residential Buildings | Miscellaneous |
| CSA Z21.1-2016 | Household Cooking Gas Appliances | Household Cooking Appliances, Gas Fired |
| CSA Z21.5.1-2016 | Gas Clothes Dryers- Volume I, Type 1 Clothes Dryers (same as CSA 7.1) | Fuel Gas, Appliances |
| CSA Z21.5.2-2016 | Gas Clothes Dryers-Volume II, Type 2 Clothes Dryers (same as CSA 7.2) | Fuel Gas, Appliances |
| CSA Z21.11.2-2013 | Gas-Fired Room Heaters, Volume II, Unvented Room Heaters | Room Heaters, Unvented Heaters |
| CSA Z21.12b-1994 (R2010) | Draft Hoods | Fuel Gas, Appliances |
| CSA Z21.13-2014 | Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9) | Fuel Gas, Appliances |
| CSA Z21.15b-2013 (R2014) | Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CSA 9.1b) | Fuel Gas |
| CSA Z21.17a-2008 | Domestic Gas Conversion Burners (same as CSA 2.7a) | Conversion Burner Installation, Gas Burners |
| CSA Z21.18b-2012 (R2012) | Gas Appliance Pressure Regulators (same as CSA 6.3b) | Appliance Regulators, Gas Refrigerators, Pressure Regulators |
| CSA Z21.19-2014 | Refrigerators Using Gas Fuel (same as CSA 1.4) | Gas Refrigerators, Refrigerators |
| CSA Z21.20a-2008 | Automatic Gas Ignition Systems and Components | Automatic Ignition, Gas Ignition, Ignition |
| CSA Z21.21-2015 | Automatic Valves for Gas Appliances (same as CSA 6.5) | Appliance Valves, Automatic Gas Valves, Valves |
| CSA Z21.22-2015 | Relief Valves for Hot Water Supply Systems (same as CSA 4.4) | Valves |
| CSA Z21.40.1a-1997/CGA 2.91a-M97 (R2012) | Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances | Gas Fired Air Conditioning, Gas Fired Heat Pump |
| CSA Z21.42-2013 | Gas-Fired Illuminating Appliances | Illuminating Appliances |
| CSA Z21.47-2012 | Gas-Fired Central Furnaces (same as CSA 2.3) | Fuel Gas, Appliances |
| CSA Z21.50-2014 | Vented Gas Fireplaces (same as CSA 2.22) | Appliances, Decorative Appliances |
| CSA Z21.56-2014 | Gas-Fired Pool Heaters (same as CSA 4.7) | Fuel Gas, Swimming Pools, Spas, and Hot Tubs |
| CSA Z21.58-2015 | Outdoor Cooking Gas Appliances (same as CSA 1.6) | Cooking Appliances |
| CSA Z21.60-2012 | Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces (same as CSA 2.26) | Decorative Appliances, Decorative Fireplace Appliances |
| CSA Z21.61-1983 (R2004) | Gas-Fired Toilets | Toilets |
| CSA Z21.66-2015 | Automatic Damper Devices for Use with Gas-Fired Appliances (same as CSA 6.14) | Vent Dampers, Automatic Dampers |
| CSA Z21.71a-2005 (R2007) | Automatic Intermittent Ignition Systems for Field Installation | Automatic Pilot Ignition, Pilot Ignition |
| CSA Z21.86-2008 | Vented Gas-Fired Space Heating Appliances (same as CSA 2.32) | Fuel Gas Appliances |
| CSA Z21.88-2014 | Vented Gas Fireplace Heaters (same as CSA 2.33) | Fireplace Heaters |
| CSA Z83.8-2016 | Gas Unit Heaters, Gas Packaged Heaters, Gas Utility Heaters, and Gas-Fired Duct Furnaces (same as CSA 2.6) | Fuel Gas Appliances |
| CSA Z83.11-2016 | Gas Food Service Equipment (same as CSA 1.8) | Fuel Gas, Appliances |
| CSA Z83.19a-2011 | Gas-Fired High-Intensity Infrared Heaters (same as CSA 2.35a) | High Intensity Heaters, Infrared Heaters |
| CSA Z83.20b-2011 | Gas-Fired Low-Intensity Infrared Heaters (same as CSA 2.34b) | Infrared Heaters, Low Intensity Heaters |
| IAPMO IGC 293-2012 | Tubing and Fittings for Special Hydronic Radiant Drywall Panels | HVAC, Fittings, Tubing |
| IAPMO PS 117-2012ael | Press and Nail Connections | Fittings |
| IAPMO PS 120-2004 | Flashing and Stand Combination for Air Conditioning Units (Residential or Commercial Unit Curb) | Air Conditioning Flashing Stand |
| ISO 13256-1-1998 (R2012) | Water Source Heat Pumps-Testing and Rating for Performance-Water-to-Air and Brine-to-Air Heat Pumps | Water-Source Heat Pumps |
| ISO 13256-2-1998 | Water Source Heat Pumps-Testing and Rating for Performance-Water-to-Water and Brine-to-Water Heat Pumps | Water-Source Heat Pumps |
| MSS SP-67-2011 | Butterfly Valves | Valves |
| MSS SP-80-2013 | Bronze Gate, Globe, Angle, and Check Valves | Valves |
| MSS SP-104-2012 | Wrought Copper Solder-Joint Pressure Fittings | Fittings |
| MSS SP-106-2012 | Cast Copper Alloy Flanges and Flanged Fittings: Class 125, 150, and 300 | Fittings |
| MSS SP-109-2012 | Weld-Fabricated Copper Solder-Joint Pressure Fittings | Fittings |
| NFPA 30-2015 | Flammable and Combustible Liquids Code | Combustible Liquids, Flammable Liquids |
| NFPA 91-2015 | Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate Solids | Product Conveying Ducts |
| NFPA 259-2013 | Potential Heat of Building Materials | Testing, Building Materials |
| NFPA 274-2013 | Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation | Pipe Insulation |
| NFPA 501A-2017 | Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities | Miscellaneous |
| NFPA 5000-2015 | Building Construction and Safety Code | Miscellaneous |
| SAE J512-1997 | Automotive Tube Fittings | Fittings |
| SMACNA-2003 | Fibrous Glass Duct Construction Standard, 7th Edition | Fiberglass Ducts |
| SMACNA-2008 | IAQ Guidelines for Occupied Buildings Under Construction, 2nd Edition | Ventilation |
| UL 21-2014 | LP-Gas Hose (with revisions through September 29, 2015) | Hose, LPG Hose |
| UL 33-2010 | Heat Responsive Links for Fire-Protection Service (with revisions through April 14, 2015) | Fusible Links |
| UL 51-2013 | Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia, LP-Gas, and Propylene (with revisions through May 18, 2015) | Ammonia Pumps, LPG Pumps, Pumps |
| UL 80-2007 | Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids (with revisions through January 16, 2014) | Fuel Gas |
| UL 125-2014 | Flow Control Valves for Anhydrous Ammonia and LP-Gas (with revisions through February 18, 2015) | Fuel Gas |
| UL 132-2015 | Safety Relief Valves for Anhydrous Ammonia and LP-Gas (with revisions through February 17, 2016) | Fuel Gas |
| UL 144-2012 | LP-Gas Regulators (with revisions through November 05, 2014) | Fuel Gas |
| UL 174-2004 | Household Electric Storage Tank Water Heaters (with revisions through April 10, 2015) | Appliances |
| UL 180-2012 | Liquid-Level Gauges for Oil Burner Fuels and other combustible liquids | Gauges, Level Gauges |
| UL 252-2010 | Compressed Gas Regulators (with revisions through January 28, 2015) | Fuel Gas |
| UL 343-2008 | Pumps for Oil-Burning Appliances (with revisions through June 12, 2013) | Fuel Gas, Appliances |
| UL 353-1994 | Limit Controls (with revisions through November 8, 2011) | Controls |
| UL 404-2010 | Gauges, Indicating Pressure, for Compressed Gas Service (with revisions through February 11, 2015) | Fuel Gas |
| UL 429-2013 | Electrically Operated Valves | Valves |
| UL 443-2006 | Steel Auxiliary Tanks for Oil-Burner Fuel (with revisions through March 8, 2013) | Fuel Gas |
| UL 525-2008 | Flame Arresters (with revisions through August 10, 2012) | Flame Arrestors |
| UL 565-2013 | Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas | Fuel Gas |
| UL 569-2013 | Pigtails and Flexible Hose Connectors for LP-Gas | Fuel Gas |
| UL 732-1995 | Oil-Fired Storage Tank Water Heaters (with revisions through October 9, 2013) | Fuel Gas, Appliances |
| UL 733-1993 | Oil-Fired Air Heaters and Direct-Fired Heaters (with revisions through October 9, 2013) | Water Heaters, Direct Fired, Oil Fired |
| UL 842-2015 | Valves for Flammable Fluids | Valves |
| UL 984-1996 | Hermetic Refrigerant Motor-Compressors (with revisions through September 23, 2005) | Compressors, Refrigeration |
| UL 1453-2016 | Electric Booster and Commercial Storage Tank Water Heaters | Appliances |
| UL 1746-2007 | External Corrosion Protection Systems for Steel Underground Storage Tanks (with revisions through December 19, 2014) | Tanks |
ABBREVIATIONS IN TABLE 1701.1 AND TABLE 1701.2
| AABC | Associated Air Balance Council, 1518 K Street NW, Suite 503, Washington, DC 20005. |
| ACCA | Air Conditioning Contractors of America Association, Inc., 2800 S Shirlington Road, Suite 300, Arlington, VA22206. |
| AHRI | Air-Conditioning, Heating, and Refrigeration Institute, 2111 Wilson Boulevard, Suite 500, Arlington, VA 22201. |
| AMCA | Air Movement and Control Association, 30 West University Drive, Arlington Heights, IL 60004-1806. |
| ANSI | American National Standards Institute, Inc., 25 W. 43rd Street, 4th Floor, New York, NY 10036. |
| ASCE | American Society of Civil Engineers, 1801 Alexander Bell Drive, Reston, VA20191-4400. |
| ASHRAE | American Society of Heating, Refrigerating, and Air Conditioning Engineers, Inc., 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. |
| ASME | American Society of Mechanical Engineering, Two Park Avenue, New York, NY 10016-5990. |
| ASSE | American Society of Sanitary Engineering, 18927 Hickory Creek Drive, Suite 220, Mokena, IL 60448. |
| ASTM | ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. |
| AWS | American Welding Society, 8669 NW 36 Street, #130, Miami, FL 33166-6672. |
| AWWA | American Water Works Association, 6666 W. Quincy Avenue, Denver, CO 80235. |
| CGA | Canadian Gas Association, 243 Consumers Road, Suite 1200, North York, Ontario, Canada M2J 5E3. |
| CSA | Canadian Standards Association, 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3. |
| el | An editorial change since the last revision or reapproval. |
| IAPMO | International Association of Plumbing and Mechanical Officials, 4755 E. Philadelphia Street, Ontario, CA 91761. |
| IIAR | International Institute of Ammonia Refrigeration, 1001 N. Fairfax Street, Suite 503, Alexandria, VA22314. |
| ISO | International Organization for Standardization, 1 ch. de la Voie-Creuse, Casa Postale 56, CH-1211 Geneva 20, Switzerland. |
| MSS | Manufacturers Standardization Society of the Valve and Fittings Industry, 127 Park Street NE, Vienna, VA22180. |
| NEBB | NEBB, 8575 Grovemont Circle, Gaithersburg, MD 20877. |
| NFPA | National Fire Protection Association, 1 Batterymarch Park, Quincy, MA02169-7471. |
| NSF | NSF International, 789 N. Dixboro Road, Ann Arbor, MI48105. |
| SAE | Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096. |
| SMACNA | Sheet Metal and Air Conditioning Contractors National Association, 4201 Lafayette Center Drive, Chantilly, VA20151-1219. |
| UL | Underwriters Laboratories, Inc., 333 Pfingsten Road, Northbrook, IL 60062. |