ADOPTS WITH AMENDMENTS:

International Residential Code 2015 (IRC 2015)

Part I — Administrative

Part II — Definitions

Part III — Building Planning and Construction

Part IV — Energy Conservation

Part V — Mechanical

Part VI — Fuel Gas

Part VII — Plumbing

Part IX — Referenced Standards

Heads up: There are no amended sections in this chapter.

For SI: 1 inch = 25.4 mm.
FIGURE N1
TYPICAL SINGLE-BATH WET-VENT ARRANGEMENTS



For SI: 1 inch = 25.4 mm.
FIGURE N2
TYPICAL DOUBLE-BATH WET-VENT ARRANGEMENTS



For SI: 1 inch = 25.4 mm.
Note: The lower lavatory connected to the horizontal part of the wet vent illustrates a portion of Section P3105.4 vertical leg for waste fixture drains.
FIGURE N3
TYPICAL HORIZONTAL WET VENTING


R 408.30534


For SI: 1 inch = 25.4 mm.
FIGURE N4
TYPICAL METHODS OF WET VENTING



For SI: 1 inch = 25.4 mm.
FIGURE N5
SINGLE STACK SYSTEM FOR A TWO-STORY DWELLING



For SI: 1 inch = 25.4 mm.
FIGURE N6
WASTE STACK VENTING



For SI: 1 inch = 25.4 mm.
FIGURE N7
CIRCUIT VENT WITH ADDITIONAL NONCIRCUIT-VENTED BRANCH
UpCodes Premium
Leverage the most sophisticated code compliance platform.
TRY FREE FOR TWO WEEKS VISIT PRICING