Heads up: There are no amended sections in this chapter.
Reference Title
Air Conditioning, Heating and Refrigeration Institute (AHRI)
2111 Wilson Blvd., Suite 500, Arlington, VA 22201
 
AHRI 210/240-200 with Addendum 1 and 2 Unitary Air Conditioning and Air-Source Heat Pump Equipment
AHRI 310/380-2004 Packaged Terminal Air-Conditioners and Heat Pumps
AHRI 340/360-2007 with Addenda 1 and 2 Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment
AHRI 365-2009 Commercial and Industrial Unitary Air-Conditioning Condensing Units
AHRI 390-2003 Performance Rating of Single Packaged Vertical Air-Conditioners and Heat Pumps
AHRI 400-2001 with Addendum 2 Liquid-to-Liquid Heat Exchangers
AHRI 460-2005 Remote Mechanical Draft Air Cooled Refrigerant Condensers
AHRI 550/590-2011 (I-P) with Addendum 1 and AHRI 551/591 (SI) Performance Rating of Water-Chilling and Heat-Pump Water-Heating Packages Using the Vapor Compression Cycle
AHRI 560-2000 Absorption Water Chilling and Water Heating Packages
AHRI 1160-2009 Performance Rating of Heat Pump Pool Heaters
AHRI 1200-2010 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
AHRI 1230-2010 with Addendum 1 Performance Rating of Variable Refrigerant Flow (VRF) Multi-split Air-Conditioning and Heat Pump Equipment
BTS 2000 Testing Standard Method to Determine Efficiency of Commercial Space Heating Boilers
Air Movement and Control Association International (AMCA)
30 West University Drive, Arlington Heights, IL 60004-1806
 
AMCA 205-12 Energy Efficiency Classification for Fans
ANSI/AMCA 500-D-12 Laboratory Methods of Testing Dampers for Rating
American Architectural Manufacturers Association (AAMA)
1827 Walden Office Square, Suite 550, Schaumburg, IL 60173-4268
 
AAMA/WDMA/CSA 101/I.S.2/A440-08 Standard/Specification for Windows, Doors, and Unit Skylights
American National Standards Institute (ANSI),
11 West 42nd Street, New York, NY 10036
 
ANSI Z21.10.3-2011 Gas Water Heater, Volume 3, Storage, with Input Ratings above 75,000 Btu/h, Circulating and Instantaneous Water Heaters
ANSI Z21.47-2012 Gas-Fired Central Furnaces
ANSI Z83.8-2009 Gas Unit Heaters and Duct Furnaces
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016-5990
 
ASME A17.1-2010/CSA B44-10 Safety Code for Elevators and Escalators
ASHRAE
1791 Tullie Circle, NE, Atlanta, GA 30329
 
ANSI/ASHRAE/IESNA Standard 90.1-2007 Energy Standard for Buildings Except Low-Rise Residential Buildings
ANSI/ASHRAE/ACCA Standard 183-2007 Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings
ANSI/ASHRAE Standard 62.1-2007 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 127-2007 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners
ANSI/ASHRAE Standard 140-2011 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ANSI/ASHRAE Standard 154-2003 Ventilation for Commercial Cooking Operations
Briggs, R.S., R.G. Lucas, and Z.T. Taylor. 2003 Climate classification for building energy codes and standards: Part 1—Development process
ANSI/ASHRAE Standard 55-2010 Thermal Environmental Conditions for Human Occupancy
Association of Home Appliance Manufacturers (AHAM)
1111 19th Street NW, Suite 402, Washington, DC 20036
 
ANSI/AHAM HRF-1-2008 Energy and Internal Volume of Refrigerating Appliances (including errata issued November 17, 2009)
ANSI/AHAM RAC-1-R2008 Room Air Conditioners
ASTM International
100 Barr Harbor Dr., West Conshohocken, PA 19428-2959
 
ASTM C90-03 Standard Specification for Loadbearing Concrete Masonry Units
ASTM C177-97 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmittance Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C272-01 Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
ASTM C518-04 Standard Test Method for Steady-State Thermal Transmittance Properties by Means of the Heat Flow Meter Apparatus
ASTM C835-01 Standard Test Method for Total Hemispherical Emittance of Surfaces From 20°C to 1400°C
ASTM C1363-97 Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
ASTM D1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM E283-04 Standard Test Method for Determining Rate of Air Leakage
Through Exterior Windows, Curtain Walls, and Doors
Under Specified Pressure Differences Across the Specimen
ASTM E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E972-96 (2002) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM E1175-87 (2003) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
ASTM E1677-2005 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
ASTM E1680-95 (2003) Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM E1918 (2006) Standard Test Method for Measuring Solar Reflectance of Horizontal or Low-Sloped Surfaces in the Field
ASTM E1980 (2001) Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low Sloped Opaque Surfaces
ASTM E2178-03 Standard Test Method for Air Permeance of Building Materials
ASTM E2357-05 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Canadian Standards Association (CSA)
5060 Spectrum Way, Mississauga, Ontario, Canada L4W 5N6
 
AAMA/WDMA/CSA 101/I.S.2/A440-08 Standard/Specification for Windows, Doors, and Unit Skylights
Cool Roof Rating Council (CRRC)
1610 Harrison Street, Oakland, CA 94612
 
ANSI/CRRC-1 Standard-2012 Cool Roof Rating Council—ANSI/CRRC-1 Standard
Cooling Technology Institute (CTI)
2611 FM 1960 West, Suite A-101, Houston, TX 77068-3730; P.O. Box 73383, Houston, TX 77273-3383
 
CTI ATC-105 (00) Acceptance Test Code for Water Cooling Towers
CTI ATC-105S (11) Acceptance Test Code for Closed-Circuit Cooling Towers
CTI ATC-106 (11) Acceptance Test Code for Mechanical Draft Evaporative Vapor Condensers
CTI STD-201 (11) Standard for Thermal Performance Certification of Evaporative Heat Transfer Equipment
Door and Access Systems Manufacturers Association (DASMA)
1300 Sumner Avenue, Cleveland, OH 44115-2851
 
ANSI/DASMA 105-92 (R 1998) Test Method for Thermal Transmittance and Air Infiltration of Garage Doors
Illuminating Engineering Society (IES)
120 Wall street, Floor 17, New York, NY 10005-4001
 
ANSI/IES RP-28-2007 Lighting and the Visual Environment for Senior Living
International Organization for Standardization (ISO)
1, rue de Varembe, Case postale 56, CH-1211 Geneve 20, Switzerland
 
ISO 13256-1 (1998) Water-Source Heat Pumps—Testing and Rating for Performance— Part 1: Water-to-Air and Brine-to-Air Heat Pumps
ISO 13256-2 (1998) Water-Source Heat Pumps—Testing and Rating for Performance— Part 2: Water-to-Water and Brine-to-Water Heat Pumps
National Electrical Manufacturers Association (NEMA)
1300 N. 17th Street, Suite 1847, Rosslyn, VA 22209
 
ANSI/NEMA MG 1-2006 Motors and Generators
National Fenestration Rating Council (NFRC)
6305 Ivy Lane, Suite 140, Greenbelt, MD 20770-6323
 
NFRC 100-2010 Procedure for Determining Fenestration Product U-Factors
NFRC 200-2010 Procedure for Determining Fenestration Product
Solar Heat Gain Coefficients and Visible Transmittance at Normal Incidence
NFRC 300-2010 Test Method for Determining the Solar Optical Properties of Glazing Materials and Systems
NFRC 301-2010 Test Method for Emittance of Specular Surfaces Using Spectrometric Measurements
NFRC 400-2010 Procedure for Determining Fenestration Product Air Leakage
National Fire Protection Association (NFPA)
1 Battery March Park, P.O. Box 9101, Quincy, MA 02269-9101
 
ANSI/NFPA 70-2008 National Electric Code
NFPA 70 Article 708-2011 Critical Operations Power Systems (COPS)
NFPA 96-12 Ventilation Control and Fire Protection of Commercial Cooking Operations
Telecommunications Industry Association (TIA)
2500 Wilson Boluevard, Arlington, VA 22201
 
ANSI/TIA-942-2005 Telecommunication Infrastructure Standard for Data Centers
Underwriters Laboratories, Inc. (UL)
333 Pfingsten Rd., Northbrook, IL 60062
 
UL 181A-2005 Closure Systems for Use with Rigid Air Ducts and Air Connectors
UL 181B-2005 Closure Systems for Use with Flexible Air Ducts and Air Connectors
UL 727-06 UL Standard for Safety—Oil Fired Central Furnaces
UL 731-12 UL Standard for Safety—Oil-Fired Unit Heaters
U.S. Department of Energy (DOE)
1000 Independence Avenue, SW, Washington, DC 20585
 
10 CFR Part 430, App N Uniform Test Method for Measuring the Energy Consumption of Furnaces
10 CFR 431 Subpart K, App A Uniform Test Method for Measuring the Energy Consumption of Distribution Transformers
10 CFR Part 431, Subpart B, App B Uniform Test Method for Measuring Nominal Full-Load Efficiency of Electric Motors
42 USC 6831, et seq., Public Law 102-486 Energy Policy Act of 1992
U.S. Security and Exchange Commission (SEC)
100 F Street, NE, Washington, DC 2-549
 
The Interagency Paper on Sound Practices to Strengthen the Resilience of the US Financial System The Interagency Paper on Sound Practices to Strengthen the Resilience of the US Financial System, April 7, 2003
Window and Door Manufacturers Association (WDMA)
2025 M Street, NW, Washington, DC 20036
 
AAMA/WDMA/CSA 101/I.S.2/A440-08 North American Fenestration Standard/Specification for Windows, Doors, and Skylights
UpCodes Premium
Leverage the most sophisticated code compliance platform.
TRY FREE FOR TWO WEEKS VISIT PRICING