UpCodes logo
Table of contentsContents

Chapter 15 Referenced Standards

User note:
About this chapter: This code contains numerous references to standards that are used to provide requirements for materials and methods of construction. Chapter 15 contains a comprehensive list of all standards that are referenced in this code. These standards, in essence, are part of this code to the extent of the reference to the standard.
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.8.
ANSI
American National Standards Institute
25 West 43rd Street, 4th Floor
New York NY 10036
Z21.22—99 (R2003)
Relief Valves for Hot Water Supply Systems with Addenda Z21.22a—2000 (R2003) and Z21.22b—2001 (R2003)
504.2, 504.4,504.4.1
ASHRAE
ASHRAE
1791 Tullie Circle NE
Atlanta GA 30329
ASHRAE 18—2008 (RA13)
Method of Testing for Rating Drinking-Water Coolers with Self-contained Mechanical Refrigeration (ANSI/ASHRAE Approved)
410.1
ASME
American Society of Mechanical Engineers
Two Park Avenue
New York NY 10016-5990
A112.1.2—2012
Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water Connection Receptors)
406.1, 409.2, Table 608.1, 608.14.1
A112.1.3—2000 (R2015)
Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances
406.1, 409.2, Table 608.1, 608.14.1, 1102.6
A112.3.1—2007 (R2012)
Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground
413.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, 1102.6, Table 1102.7
ASME A112.3.4—2013/CSA B45.9—2013
Macerating Toilet Systems and Related Components
405.5, 712.4.1
A112.4.1—2009
Water Heater Relief Valve Drain Tubes
504.6
A112.4.2—2015/CSA B45.16—15
Water Closet Personal Hygiene Devices
412.9
A112.4.3—1999 (R2010)
Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
405.4
A112.4.14—2004 (R2016)
Manually Operated, Quarter-turn Shutoff Valves for Use in Plumbing Systems
Table 605.7
A112.6.2—2000 (R2016)
Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks
405.4.3
A112.6.3—2001 (R2016)
Floor and Trench Drains
413.1
A112.6.4—2003 (R2012)
Roof, Deck, and Balcony Drains
1102.6
A112.6.7—2010 (R2015)
Sanitary Floor Sinks
414.1
A112.6.9—2005(R2015)
Siphonic Roof Drains
1107.1
A112.14.1—2003 (R2012)
Backwater Valves
714.2
A112.14.3—2016
Grease Interceptors
1003.3.5
A112.14.4—2001 (R2012)
Grease Removal Devices
1003.3.5
A112.14.6—2010 (R2015)
FOG (Fats, Oils and Greases) Disposal Systems
1003.3, 1003.3.5, 1003.3.7
A112.18.1—2017/CSA B125.1—2017
Plumbing Supply Fittings
412.1, 412.2, 412.3, 412.4, 412.6, 412.8, 605.7, 607.4, 608.2
A112.18.2—2015/CSA B125.2—15
Plumbing Waste Fittings
412.1.2
A112.18.3—2002 (R2012)
Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
412.2, 412.6
A112.18.6—2017/CSA B125.6—17
Flexible Water Connectors
605.6
A112.18.9—2011
Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures
404.3
A112.19.1—2013/CSA B45.2—2013
Enameled Cast Iron and Enameled Steel Plumbing Fixtures
407.1, 410.1, 418.1, 419.1, 422.1
A112.19.2—2013/CSA B45.1—13
Ceramic Plumbing Fixtures
401.2, 405.10, 407.1, 408.1, 410.1, 418.1, 419.1, 421.1, 422.1, 424.1, 425.1
A112.19.3—2008/CSA B45.4—08(R2013)
Stainless Steel Plumbing Fixtures
405.9, 407.1, 418.1, 419.1, 425.1
A112.19.5—2017/CSA B45.15—2017
Flush Valves and Spuds for Water-closets, Urinals, and Tanks
415.4
A112.19.7M—2017/CSA B45.10—17
Hydromassage Bathtub Systems
426.1, 426.4
A112.19.12—2014
Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Waste Systems
419.4
A112.19.14—2013
Six-liter Water Closets Equipped with a Dual Flushing Device
425.1
A112.19.15—2012
Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors
407.4, 426.6
A112.19.19—2006(R2011)
Vitreous China Nonwater Urinals
424.1
A112.21.3—1985(R2007)
Hydrants for Utility and Maintenance Use
Table 608.1, 608.14.6
A112.36.2M—1991(R2012)
Cleanouts
708.1.10.2
ASSE 1002—2015/ASME A112.1002—2015/CSA B125.12—15
Anti-Siphon Fill Valves
415.3.1, Table 608.1
ASSE 1016—2017/ASME A112.1016—2017/CSA B125.16—2017
Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings
412.3, 412.4, 607.4
ASSE 1037—2015/ASME A112.1037—2015/CSA B125.37—
Pressurized Flushing Devices for Plumbing Fixtures
415.2
ASSE 1070—2015/ASME A112.1070—2015/CSA B125.1070—15
Water Temperature Limiting Devices
408.3, 412.5, 412.10, 419.5, 423.3, 607.1.2
B1.20.1—2013
Pipe Threads, General Purpose (inch)
605.10.3, 605.12.4, 605.14.3, 605.17.1, 705.2.3, 705.5.4, 705.8.1, 705.10.3
B16.3—2016
Malleable Iron Threaded Fittings Classes 150 and 300
Table 1102.7
B16.4—2016
Gray Iron Threaded Fittings Classes 125 and 250
Table 605.5, Table 702.4, Table 1102.7
B16.9—2012
Factory-made Wrought Steel Buttwelding Fittings
Table 605.5, Table 702.4, Table 1102.7
B16.11—2016
Forged Fittings, Socket-welding and Threaded
Table 605.5, Table 702.4, Table 1102.7
B16.12—2009 (R2014)
Cast-iron Threaded Drainage Fittings
Table 702.4, Table 1102.7
B16.15—2013
Cast Alloy Threaded Fittings: Class 125 and 250
Table 605.5, Table 702.4, Table 1102.7
B16.18—2012
Cast Copper Alloy Solder Joint Pressure Fittings
Table 605.5, Table 702.4, Table 1102.7
B16.22—2013
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
Table 605.5, Table 702.4, Table 1102.7
B16.23—2016
Cast Copper Alloy Solder Joint Drainage Fittings DWV
Table 702.4, Table 1102.7
B16.26—2016
Cast Copper Alloy Fittings for Flared Copper Tubes
Table 605.5, Table 702.4, Table 1102.7
B16.28—1994
Wrought Steel Buttwelding Short Radius Elbows and Returns
Table 605.5, Table 702.4, Table 1102.7
B16.29—2012
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV)
Table 702.4, Table 1102.7
B16.34—2015
Valves Flanged, Threaded and Welding End
Table 605.7
B16.51—2013
Copper and Copper Alloy Press-connect Pressure Fittings
Table 605.5
ASPE
American Society of Plumbing Engineers
6400 Shafer Ct., Suite 350
Rosemont IL 60018-4914
45—2013
Siphonic Roof Drainage Systems
1107.1
ASSE
ASSE International
18927 Hickory Creek Drive, Suite 220
Mokena IL 60448
1001—2016
Performance Requirements for Atmospheric Type Vacuum Breakers
415.2, Table 608.1, 608.14.6, 608.17.4.1
ASSE 1002—2015/ASME A112.1002—2015/CSA B125.12—15
Antisiphon Fill Valves
415.3.1, Table 608.1
1003—09
Performance Requirements for Water Pressure Reducing Valves
604.8
1004—2016
Performance Requirements for Commercial Dishwashing Machines
409.1
1005—99
Performance Requirements for Water Heater Drain Valves
501.3
1008—06
Performance Requirements for Plumbing Aspects of Food Waste Disposer Units
413.1
1010—04
Performance Requirements for Water Hammer Arresters
604.9
1011—2016
Performance Requirements for Hose Connection Vacuum Breakers
Table 608.1, 608.14.6
1012—09
Performance Requirements for Backflow Preventers with Intermediate Atmospheric Vent
Table 608.1, 608.14.3, 608.17.2, 608.17.10
1013—2017
Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers
Table 608.1, 608.14.2, 608.17.2
1015—2017
Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.14.7
ASSE 1016—2017/ASME A112.1016—2017/CSA B125.16—2017
Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings
412.3, 412.4, 607.4
1017—2010
Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems
501.2, 613.1
1018—2017
Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied
1002.4.1.2
1019—2016
Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type
Table 608.1, 608.14.6
1020—04
Performance Requirements for Pressure Vacuum Breaker Assembly
Table 608.1, 608.14.5
1022—2016
Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment
Table 608.1, 608.17.1.1, 608.17.1.2
1024—2016
Performance Requirements for Dual Check Valve Type Backflow Preventers, Anti-siphon-type, Residential Applications
605.3.1, Table 608.1, 608.14.9, 608.17.1.2
1035—08
Performance Requirements for Laboratory Faucet Backflow Preventers
Table 608.1, 608.14.6
ASSE 1037—2015/ASME A112.1037—2015/CSA B125.37—15
Pressurized Flushing Devices for Plumbing Fixtures
415.2
1044—2010
Performance Requirements for Trap Seal Primer Devices Drainage Types and Electronic Design Types
1002.4.1.3
1047—2017
Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.14.2
1048—2017
Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.14.7
1049—2009
Performance Requirements for Individual and Branch Type Air Admittance Valves for Chemical Waste Systems
901.3, 918.8
1050—2009
Performance Requirements for Stack Air Admittance Valves for Sanitary Drainage Systems
918.1
1051—2009
Performance Requirements for Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systemsfixture and Branch Devices
918.1
1052—2016
Performance Requirements for Hose Connection Backflow Preventers
Table 608.1, 608.14.6
1055—2016
Performance Requirements for Chemical Dispensing Systems
608.14.8
1056—2013
Performance Requirements for Spill Resistant Vacuum Breaker
Table 608.1, 608.14.5
1060—2016
Performance Requirements for Outdoor Enclosures for Fluid Conveying Components
608.15.1
1061—2015
Performance Requirements for Push Fit Fittings
Table 605.5, 605.14.4, 605.16.3
1062—2016
Performance Requirements for Temperature Actuated, Flow Reduction (TAFR) Valves to Individual Supply Fittings
1066—2016
Performance Requirements for Individual Pressure Balancing In-line Valves for Individual Fixture Fittings
604.11
1069—05
Performance Requirements for Automatic Temperature Control Mixing Valves
412.4
ASSE 1070—2015/ASME A112.1070—2015/CSA B125.70—15
Water-temperature Limiting Devices
408.3, 419.5, 423.3, 607.1.2
1071—2012
Performance Requirements for Temperature Actuated Mixing Valves for Plumbed Emergency Equipment
411.3, 412.5, 412.10, 419.5, 423.3, 607.1.2
1072—07
Performance Requirements for Barrier Type Floor Drain Tap Seal Protection Devices
1079—2005
Performance Requirements for Dielectric Pipe Unions
605.23.1, 605.23.3
5013—2015
Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP)
312.10.2
5015—2015
Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF)
312.10.2
5020—2015
Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA)
312.10.2
5047—2015
Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA)
312.10.2
5048—2015
Performance Requirements for Testing Double Check Valve Detector Assembly (DCDA)
312.10.2
5052—98
Performance Requirements for Testing Hose Connection Backflow Preventers
312.10.2
5056—2015
Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB)
312.10.2
ASTM
ASTM International
100 Barr Harbor Drive, P.O. Box C700
West Conshohocken PA 19428-2959
A53/A53M—12
Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless
Table 605.3, Table 605.4, Table 702.1
A74—15
Specification for Cast-iron Soil Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7
A312/A312M—15a
Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
Table 605.3, Table 605.4, Table 605.5, 605.22.2
A733—15
Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
Table 605.8
A778/A778M—15
Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products
Table 605.3, Table 605.4, Table 605.5
A888—15
Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
B32—08(2014)
Specification for Solder Metal
605.12.3, 605.13.6, 705.5.3, 705.6.1
B42—15a
Specification for Seamless Copper Pipe, Standard Sizes
Table 605.3, Table 605.4, Table 702.1
B43—15
Specification for Seamless Red Brass Pipe, Standard Sizes
Table 605.4, Table 702.1
B75/B75M—11
Specification for Seamless Copper Tube
Table 605.3, Table 605.4, Table 702.1, Table 702.2, Table 702.3, Table 1102.4
B88—14
Specification for Seamless Copper Water Tube
Table 605.3, Table 605.4, Table 702.1, Table 702.2, Table 702.3, Table 1102.4
B152/B152M—13
Specification for Copper Sheet, Strip Plate and Rolled Bar
402.3, 415.3.3, 902.2
B251—10
Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
Table 605.3, Table 605.4, Table 702.1, Table 702.2, Table 702.3, Table 1102.4
B302—12
Specification for Threadless Copper Pipe, Standard Sizes
Table 605.3, Table 605.4, Table 702.1
B306—13
Specification for Copper Drainage Tube (DWV)
Table 702.1, Table 702.2, Table 1102.4
B447—12a
Specification for Welded Copper Tube
Table 605.3, Table 605.4
B687—99(2011)
Specification for Brass, Copper and Chromium-plated Pipe Nipples
Table 605.8
B813—10
Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
605.12.3, 605.13.6, 705.5.3, 705.6.1
B828—02(2010)
Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
605.12.3, 605.13.6, 705.5.3, 705.6.1
C4—04(2014)
Specification for Clay Drain Tile and Perforated Clay Drain Tile
Table 702.3, Table 1102.4, Table 1102.5
C14—15a
Specification for Nonreinforced Concrete Sewer, Storm Drain and Culvert Pipe
Table 702.3, Table 1102.4
C76—15a
Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe
Table 702.3, Table 1102.4
C425—04(2013)
Specification for Compression Joints for Vitrified Clay Pipe and Fittings
705.11, 705.16
C443—12
Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
705.4, 705.16
C564—14
Specification for Rubber Gaskets for Cast-iron Soil Pipe and Fittings
705.3.2, 705.3.3, 705.16
C700—13
Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
Table 702.3, Table 702.4, Table 1102.4, Table 1102.5
C1053—00(2010)
Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
Table 702.1, Table 702.4
C1173—10(2014)
Specification for Flexible Transition Couplings for Underground Piping System
705.2.1, 705.5, 705.10.1, 705.11, 705.12.2, 705.16
C1277—15
Specification for Shielded Coupling Joining Hubless Cast-iron Soil Pipe and Fittings
705.3.3
C1440—08(2013)
Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
705.16
C1460—2012
Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
705.16
C1461—08(2013)
Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use
705.19
C1540—15
Specification for Heavy Duty Shielded Couplings Joining Hubless Cast-iron Soil Pipe and Fittings
705.3.3
C1563—08(2013)
Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications
705.3.2
D1253—14
Standard Test Method For Residual Chlorine in Water
1301.2.1, 1303.9
D1527—99(2005)
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
Table 605.3
D1785—15
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120
Table 605.3
D2235—04(2011)
Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
605.10.2, 705.2.2
D2239—12a
Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
Table 605.3
D2241—15
Specification for Poly (Vinyl Chloride) (PVC) Pressure-rated Pipe (SDR-Series)
Table 605.3
D2282—99(2005)
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
Table 605.3
D2464—15
Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Table 605.5, 605.21.3
D2466—15
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
Table 605.5
D2467—15
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Table 605.5
D2468—96a
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
Table 605.5
D2564—12
Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
605.21.3, 705.10.2, 705.14.2
D2609—15
Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
Table 605.5
D2657—07
Practice for Heat Fusion-joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings
605.18.2, 705.12.1
D2661—14
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 705.2.2, Table 1102.4, Table 1102.7
D2665—14
Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
D2672—14
Specification for Joints for IPS PVC Pipe Using Solvent Cement
Table 605.3
D2683—14
Standard Specification for Socket-type Polyethylene Fittings for Outside Diameter-controlled Polyethylene Pipe and Tubing
Table 605.5, Table 702.4, 716.5
D2729—11
Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Table 1102.5, Table 1403.2
D2737—2012a
Specification for Polyethylene (PE) Plastic Tubing
Table 605.3
D2751—05
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
Table 702.3, Table 702.4, Table 1102.7
D2846/D2846M—14
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Table 605.3, Table 605.4, Table 605.5, 605.14.2, 605.15.2
D2855—96(2010)
Standard Practice for Making Solvent-cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
605.21.3, 705.10.2
D2949—10
Specification for 3.25-in. Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.7
D3034—14a
Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
D3035—15
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
Table 605.3
D3138—04(2011)
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-pressure Piping Components
D3139—98(2011)
Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
605.10.1, 605.22.1
D3212—07(2013)
Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
705.2.1, 705.10.1, 705.12.2, 705.15
D3261—12e1
Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Table 605.5
D3311—11
Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns
Table 1102.7
D4068—15
Specification for Chlorinated Polyethlene (CPE) Sheeting for Concealed Water-containment Membrane
D4551—12
Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-containment Membrane
421.5.2.1
E2635—14
Standard Practice for Water Conservation Through In-Situ Water Reclamation
1302.1
E2727—10e1
Standard Practice for the Assessment of Rainwater Quality
1303.15.9
F405—05
Specification for Corrugated Polyethylene (PE) Pipe and Fittings
Table 1102.5, Table 1403.2
F409—12
Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
412.1.2, Table 1102.7
F437—15
Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 605.5
F438—15
Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
Table 605.5
F439—13
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 605.5
F441/F441M—15
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe,Schedules 40 and 80
Table 605.3, Table 605.4
F442/F442M—13e1
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
Table 605.3, Table 605.4
F477—14
Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
605.23,705.16
F493—14
Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
605.14.2
605.15.2
F628—12e1
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 705.2.2, Table 1102.4, Table 1102.7
F656—15
Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings
605.21.3, 705.10.2, 705.14.2
F667—12
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
Table 1102.4,Table 1102.5
F714—2013
Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
Table 702.3
F876—15a
Specification for Cross-linked Polyethylene (PEX) Tubing
Table 605.3, Table 605.4
F877—11a
Specification for Cross-linked Polyethylene (PEX) Hot- and Cold-water Distribution Systems
Table 605.5
F891—10
Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core
Table 702.1, Table 702.2Table 702.3, Table 1102.4, Table 1102.5, Table 1102.7
F1055—13
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Cross-linked Polyethylene Pipe and Tubing
Table 605.5
F1281—11
Specification for Cross-linked Polyethylene/Aluminum/ Cross-linked Polyethylene (PEX-AL-PEX) Pressure Pipe
Table 605.3, Table 605.4, Table 605.5, 605.20.1
F1282—10
Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
Table 605.3, Table 605.4, Table 605.5, 605.20.1
F1412—09
Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage
Table 702.1, Table 702.2, Table 702.4, 705.13.1, 901.3
F1476—07(2013)
Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
Table 605.5, 605.13.3, 605.17.3, 605.22.2, 605.22.3
F1488—14
Specification for Coextruded Composite Pipe
Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1403.2
F1548—01(2012)
Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
Table 605.5
F1673—10
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 705.14.1
F1807—15
Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Table 605.5
F1866—13
Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
Table 702.4, Table 1102.7
F1960—15
Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Table 605.5
F1970—12e1
Special Engineered Fittings, Appurtenances or Valves for Use in Poly (Vinyl Chloride) (PVC) OR Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
Table 605.7
F1974—09(2015)
Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Cross-linked Polyethylene/ Aluminum/Cross-linked Polyethylene Composite Pressure Pipe
Table 605.5, 605.20.1
F1986—01(2011)
Specification for Multilayer Pipe, Type 2, Compression Fittings and Compression Joints for Hot and Cold Drinking Water Systems
Table 605.3, Table 605.4, Table 605.5
F2080—15
Specifications for Cold-expansion Fittings with Metal Compression-sleeves for Cross-linked Polyethylene (PEX) Pipe
Table 605.5
F2098—08
Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Fittings
Table 605.5
F2159—14
Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Table 605.5
F2262—09
Specification for Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Tubing OD Controlled SDR9
Table 605.3, Table 605.4
F2306/F2306M—14e1
12" to 60" Annular Corrugated Profile-wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications
Table 1102.4, Table 1102.7
F2389—15
Specification for Pressure-rated Polypropylene (PP) Piping Systems
Table 605.3, Table 605.4, Table 605.5, Table 605.7, 605.19.1
F2434—14
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/ Cross-linked Polyethylene (PEX AL-PEX) Tubing
Table 605.5
F2648/F2648M—13
Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
Table 1102.4
F2735—09
Standard Specification for Plastic Insert Fittings for SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
Table 605.5
F2736—13e1
Standard Specification for 6 to 30 in. [152 to 762 mm] Polypropylene (PP) Corrugated Single Wall Pipe and Double Wall Pipe
Table 702.3
F2764/F2764M—11ae2
Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-pressure Sanitary Sewer Applications
Table 702.3
F2769—14
Polyethylene or Raised Temperature (PE-RT) Plastic Hot- and Cold-water Tubing and Distribution Systems
Table 605.3, Table 605.4, Table 605.5
F2831—12
Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used in Rehabilitation of Metallic Pressurized Piping Systems
601.5
F2855—12
Standard Specification for Chlorinated Poly (Vinyl Chloride)/Aluminum/Chlorinated Poly (Vinyl Chloride) (CPVC/AL/ CPVC) Composite Pressure Tubing
Table 605.3, Table 605.4
F2881—11
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-pressure Storm Sewer Applications
Table 1102.4
AWS
American Welding Society
8669 NW 36 Street, #130
Miami FL 33166
A5.8M/A5.8—2011
Specifications for Filler Metals for Brazing and Braze Welding
605.12.1, 605.13.1, 705.5.1, 705.6.1
AWWA
American Water Works Association
6666 West Quincy Avenue
Denver CO 80235
C104/A21.4—13
Cement-mortar Lining for Ductile-iron Pipe and Fittings
605.3, 605.5
C110/A21.10—12
Ductile-iron and Gray-iron Fittings
Table 605.5, Table 702.4, Table 1102.7
C111/A21.11—12
Rubber-gasket Joints for Ductile-iron Pressure Pipe and Fittings
605.11
C115/A21.15—11
Flanged Ductile-iron Pipe with Ductile-iron or Gray-iron Threaded Flanges
Table 605.3, Table 605.4
C151/A21.51—09
Ductile-iron Pipe, Centrifugally Cast for Water
Table 605.3, Table 605.4
C153—00/A21.53—11
Ductile-iron Compact Fittings for Water Service
Table 605.5
C500—09
Standard for Metal-seated Gate Valves for Water Supply Service
Table 605.7
C504—10
Standard for Rubber-Seated Butterfly Valves
Table 605.7
C507—15
Standard for Ball Valves, 6 In. Through 60 in. (150 mm through 1,500 mm).
Table 605.7
C510—07
Double Check Valve Backflow Prevention Assembly
Table 608.1, 608.14.7
C511—07
Reduced-pressure Principle Backflow Prevention Assembly
Table 608.1, 608.14.2, 608.17.2
C651—14
Disinfecting Water Mains
610.1
C652—11
Disinfection of Water-storage Facilities
610.1
C901—16
Polyethylene (PE) Pressure Pipe and Tubing 3/4 inch (19 mm) Through 3 inch (76 mm) for Water Service
Table 605.3
C904—16
Cross-linked Polyethylene (PEX) Pressure Tubing 1/2 inch (13 mm) Through 3 inch (76 mm) for Water Service
Table 605.3
CISPI
Cast Iron Soil Pipe Institute
2401 Fieldcrest Dr.
Mundelein IL 60060
301—12
Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
310—12
Specification for Coupling for Use in Connection with Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications
705.3.3
CSA
CSA Group
8501 East Pleasant Valley Road
Cleveland OH 44131-5516
A257.1M—14
Non-reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings
Table 702.3, Table 1102.4
A257.2M—14
Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings
Table 702.3, Table 1102.4
A257.3M—14
Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets
705.5, 705.16
ASME A112.18.1—2017/CSA B125.1—17
Plumbing Supply Fittings
412.1, 412.2, 412.3, 412.4, 412.6, 412.8, Table 605.7, 607.4, 608.2
ASME A112.18.2—2015/CSA B125.2—2015
Plumbing Waste Fittings
412.1.2
ASME A112.19.1—2013/CSA B45.2—2013
Enameled Cast-iron and Enameled Steel Plumbing Fixtures
407.1, 410.1, 418.1, 419.1, 422.1
ASME A112.19.2—2013/B45.1—2013
Ceramic Plumbing Fixtures
401.2, 405.10, 407.1, 408.1, 410.1, 418.1, 419.1, 421.1, 422.1, 424.1, 425.1
ASME A112.19.3—2008/CSA B45.4—08(R2013)
Stainless-steel Plumbing Fixtures
405.9, 407.1, 418.1, 419.1, 425.1
ASME A112.19.5—2017/CSA B45.15—17
Flush Valves and Spuds for Water Closets, Urinals and Tanks
415.4
ASME A112.19.7—2017/CSA B45.10—17
Hydromassage Bathtub Systems
426.1, 426.4
CSA B45.5—17/IAPMO Z124—2017
Plastic Plumbing Fixtures
407.1, 418.1, 419.1, 419.2, 421.1, 424.1, 425.1
ASME A112.3.4—2013/CSA B45.9—13
Macerating Systems and Related Components
405.5, 712.4.1
ASSE 1002—2015/ASME A112.1002—2015/CSA B125.12—2015
Anti-Siphon Fill Valves
415.3.1, Table 608.1
ASSE 1016/ASME A112.1016/CSA B125.16—2017
Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations
412.3, 412.4, 607.4
ASSE 1037—2015/ASME A112.1037—2015/CSA B125.37—15
Pressurized Flushing Devices for Plumbing Fixtures
415.2
ASSE 1070—2015/ASME A112.1070—2015/CSA B125.1070—2015
Water Temperature Limiting Devices
408.3, 412.5, 412.10, 419.5, 423.3, 607.1.2
B64.1.1—16
Vacuum Breakers, Atmospheric Type (AVB)
415.2, Table 608.1, 608.14.6, 608.17.4.1
B64.1.2—16
Pressure Vacuum Breakers, (PVB)
Table 608.1, 608.14.5
B64.1.3—16
Spill Resistant Pressure Vacuum Breakers (SRPVB)
Table 608.1, 608.14.5
B64.2—16
Vacuum Breakers, Hose Connection Type (HCVB)
Table 608.1, 608.14.6
B64.2.1—16
Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature
Table 608.1, 608.14.6
B64.2.1.1—16
Hose Connection Dual Check Vacuum Breakers (HCDVB)
Table 608.1, 608.14.6
B64.2.2—16
Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature
Table 608.1, 608.14.6
B64.3—16
Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP)
Table 608.1, 608.14.3, 608.17.2
B64.4—16
Backflow Preventers, Reduced Pressure Principle Type (RP)
Table 608.1, 608.14.2, 608.17.2
B64.4.1—16
Reduced Pressure Principle for Fire Sprinklers (RPF)
Table 608.1, 608.14.2
B64.5—16
Double Check Backflow Preventers (DCVA)
Table 608.1, 608.14.7
B64.5.1—16
Double Check Valve Backflow Preventer for Fire Systems (DCVAF)
Table 608.1, 608.14.7
B64.6—16
Dual Check Valve (DuC) Backflow Preventers
605.3.1, Table 608.1, 608.14.9
B64.7—16
Laboratory Faucet Vacuum Breakers (LFVB)
Table 608.1, 608.14.6
B64.10—16
Manual for the Selection and Installation of Backflow Prevention Devices
312.10.2
B64.10.1—11
Maintenance and Field Testing of Backflow Preventers
312.10.2
B79—08(R2013)
Commercial and Residential Drains and Cleanouts
413.1
B125.3—2012
Plumbing Fittings
408.3, 412.4, 412.5, 415.2, 415.3.1, 419.5, 423.3, Table 605.7, Table 608.1
B137.1—16
Polyethylene (PE) Pipe, Tubing and Fittings for Cold-water Pressure Services
Table 605.3, Table 605.5
B137.2—16
Polyvinylchloride, PVC, Injection-moulded Gasketed Fittings for Pressure Applications
Table 605.5
B137.3—16
Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications
Table 605.3, Table 605.5, 605.21.3, 705.10.2, 705.14.2
B137.5—16
Cross-linked Polyethylene (PEX) Tubing Systems for Pressure Applications
Table 605.3, Table 605.4, Table 605.5
B137.6—16
CPVC Pipe, Tubing and Fittings for Hot- and Cold-water Distribution Systems
Table 605.3, Table 605.4, Table 605.5
B137.9—16
Polyethylene Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-pipe Systems
Table 605.3, Table 605.5, 605.20.1
B137.10—16
Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Composite Pressure-pipe Systems
Table 605.3, Table 605.4, Table 605.5, 605.20.1
B137.11—16
Polypropylene (PP-R) Pipe and Fittings for Pressure Applications
Table 605.3, Table 605.4, Table 605.5
B137.18—13
Polyethylene of Raised Temperature Resistance (PE-RT) Tubing Systems for Pressure Applications
Table 605.3, Table 605.4, Table 605.5
B181.1—15
Acrylonitrile-Butadiene-Styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 705.2.2, 714.2, Table 1102.4, Table 1102.7
B181.2—15
Polyvinylchloride PVC and Chlorinated Polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings
Table 702.1, Table 702.2, 705.10.2, 705.14.2, 714.2
B181.3—15
Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 705.13.1
B182.1—11
Plastic Drain and Sewer Pipe and Pipe Fittings
705.10.2, 705.14.2, Table 1102.4, Table 1102.5
B182.2—11
PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings
Table 702.3, Table 1102.4, Table 1102.5
B182.4—15
Profile Polyvinylchloride PVC Sewer Pipe and Fittings
Table 702.3, Table 1102.4, Table 1102.5
B182.6—15
Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak-proof Sewer Applications
Table 1102.5
B182.8—15
Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings
Table 1102.5
B182.13—11
Profile Polypropylene (PP) Sewer Pipe and Fittings for Leak-proof Sewer Applications
Table 702.3, Table 1102.4
B356—10
Water Pressure Reducing Valves for Domestic Water Systems
604.8
B481.1—12
Testing and Rating of Grease Interceptors Using Lard
1003.3.4
B481.3—12
Sizing, Selection, Location and Installation of Grease Interceptors
1003.3.5
B483.1—07(R2012)
Drinking Water Treatment Units
611.1, 611.2
B602—15
Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe
705.2.1, 705.3.3, 705.5, 705.10.1, 705.11, 705.12.2, 705.16
IAPMO
IAPMO Group
4755 E. Philadelphia Street
Ontario CA 91761 USA
Z1001—2014
Prefabricated Gravity Grease Interceptors
1003.3.7
CSA B45.5—17/IAPMO Z124—2017
Plastic Plumbing Fixtures
407.1, 418.1, 419.1, 419.2, 421.1, 424.1, 425.1
IAPMO/ANSI Z1157—2014
Ball Valves
Table 605.7
ICC
International Code Council, Inc.
500 New Jersey Ave, NW
6th Floor
Washington DC 20001
A117.1—2009
Accessible and Usable Buildings and Facilities
404.2, 410.3
IBC—18
International Building Code®
201.3, 202, 307.1, 307.2, 307.3, 308.2, 309.1, 309.2, 310.1, 310.3, 315.1, 403.1, Table 403.1, 403.1.2, 403.3.1, 403.4, 404.1, 407.3, 421.6, 502.4, 606.5.2, 1106.5, 1301.9.3, 1303.6, 1402.1
IEBC—18
International Existing Building Code
102.2.1
IECC—18
Georgia State Minimum Standard Energy Code (IECC with Georgia State Supplements and Amendments)
313.1, 607.2.1, 607.5
IFC—18
International Fire Code®
201.3, 1201.1
IFGC—18
International Fuel Gas Code®
101.2, 201.3, 502.1, 502.1.1
IMC—18
International Mechanical Code®
201.3, 307.6, 310.1, 502.1, 502.1.1, 612.1, 1202.1
IPSDC—18
International Private Sewage Disposal Code®
701.2
IRC—18
International Residential Code®
101.2
ICC 900/SRCC 300—2015
Solar Thermal System Standard
502.1
ISEA
International Safety Equipment Association
1901 N. Moore Street, Suite 808
Arlington VA 22209
ANSI/ISEA Z358.1—2014
Emergency Eyewash and Shower Equipment
411.1
MSS
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
127 Park St. NE
Vienna VA 22180-4602
SP-67—2011
Butterfly Valves
Table 605.7
SP-70—2013
Gray Iron Gate Valves, Flanged and Threaded Ends
Table 605.7
SP-71—2013
Gray Iron Swing Check Valves, Flanged and Threaded Ends
Table 605.7
SP-72—2010a
Ball Valves with Flanged or Butt-welding Ends for General Service
Table 605.7
SP-78—2013
Cast Iron Plug Valves, Flanged and Threaded Ends
Table 605.7
SP-80—2013
Bronze Gate, Globe, Angle and Check Valves
Table 605.7
SP-110—2010a
Ball Valves, Threaded, Socket Welding, Solder Joint, Grooved and Flared Ends
Table 605.7
SP-122—2012
Plastic Industrial Ball Valves
Table 605.7
SP-139—2014
Copper Alloy Gate, Globe, Angle and Check Valves for Low Pressure/Low Temperature Plumbing Applications
Table 605.7
NFPA
National Fire Protection Association
1 Batterymarch Park
Quincy MA 02169-7471
51—18
Design and Installation of Oxygen-fuel Gas Systems for Welding, Cutting and Allied Processes
1203.1
55—16
Compressed Gases and Cryogenic Fluids Code
1203.1
70—17
Georgia State Minimum Standard Electrical Code (National Electrical Code with Georgia State Amendments)
502.1, 504.3, 1113.1.3
99—18
Health Care Facilities Code
1202.1
NGWA
National Ground Water Association
601 Dempsey Road
Westerville OH 43081
ANSI/NGWA 01—14
Water Well Construction Standard
602.3.1
NSF
NSF International
789 N. Dixboro Road P.O. Box 130140
Ann Arbor MI 48105
3—2012
Commercial Warewashing Equipment
409.1
14—2015
Plastic Piping System Components and Related Materials
303.3, 611.3
18—2012
Manual Food and Beverage Dispensing Equipment
426.1
42—2015
Drinking Water Treatment Units-Aesthetic Effects
611.1, 611.3
44—2015
Residential Cation Exchange Water Softeners
611.1, 611.3
50—2015
Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Facilities
1302.8.1
53—2015
Drinking Water Treatment Units—Health Effects
611.1, 611.3
58—2015
Reverse Osmosis Drinking Water Treatment Systems
611.1, 611.2, 611.3
61—2015
Drinking Water System Components—Health Effects
410.1, 412.1, 605.3, 605.4, 605.5, 605.7, 608.12, 611.3
62—2015
Drinking Water Distillation Systems
611.1
184—2014
Residential Dishwashers
409.1
350—2014
Onsite Residential and Commercial Water Reuse Treatment Systems
1302.6.1
359—2011
Valves for Cross-linked Polyethylene (PEX) Water Distribution Tubing Systems
Table 605.7
372—2011
Drinking Water Systems Components—Lead Content
605.2.1
PDI
Plumbing and Drainage Institute
800 Turnpike Street, Suite 300
North Andover MA 01845
PDI G101(2012)
Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Installation Data
1003.3.5
PDI G102(2009)
Testing and Certification for Grease Interceptors with Fog Sensing and Alarm Devices
1003.3.5
PSAI
Portable Sanitation Association International
2626 E. 82nd Street, Suite 175
Bloomington MN 55425
PSAI/ANSI Z4.3—16
Minimum Requirements for Nonsewered Waste-disposal Systems
311.1
TCNA
Tile Council of North America
100 Clemson Research Boulevard
Anderson SC 29625
TCNA/ANSI A118.10—99
Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation
421.5.2.5, 421.5.2.6
UL
UL LLC
333 Pfingsten Road
Northbrook IL 60062-2096
399—2008
Drinking-Water Coolers—with revisions through October 2013
410.1
430—2009
Waste Disposers—with revisions through September 2015
416.1
508—99
Industrial Control Equipment—with revisions through October 2013
314.2.3
1795—2009
Hydromassage Bathtubs—with revisions through January 2015
426.1
WATERSENSE
WaterSense
U.S. Environmental
Protection Agency
1200 Pennsylvania
Avenue, N.W.
Washington, D.C. 20460
WaterSense
Tank-Type High Efficiency Toilet Specification
202, 420.1
WaterSense
Specification for Flushing Urinals
202, 419.1 
WaterSense
High-Efficiency Lavatory Faucet Specification 
202