Heads up: There are no amended sections in this chapter.
The following documents are incorporated by reference to the extent they are referenced in the Energy Code.
AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE
AHRI 210/240-2017
Performance Rating of Unitary Air Conditioning and Air-Source Heat Pump Equipment (2017 with Addendum 1)
AHRI 310/380-2017
Packaged Terminal Air-Conditioners and Heat Pumps (2017)
AHRI 340/360 (I-P)-2019
Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (2019)
ANSI/AHRI 365 (I-P)-2009
Performance Rating of Commercial and Industrial Unitary Air-Conditioning Condensing Units (2009)
ANSI/AHRI 390-2003
Performance Rating of Single Package Vertical Air Conditioners and Heat Pumps (2003)
ANSI/AHRI 400 (I-P)-2015
Performance Rating of Liquid to Liquid Heat Exchangers (2015)
AHRI 430 (I-P)-2020
Performance Rating of Central Station Air-handling Unit Supply Fans (2020)
AHRI 440 (I-P)-2019
Performance Rating of Fan-coil Units (2019)
ANSI/AHRI 460-2005
Performance Rating of Remote Mechanical-Draft Air-Cooled Refrigerant Condensers (2005)
AHRI 550/590 (I-P)-2020
Performance Rating of Water-Chilling and Heat Pump Water-heating Packages Using the Vapor Compression Cycle (2020)
AHRI 560-2000
Absorption Water Chilling and Water Heating Packages (2000)
AHRI 680 (I-P)-2017
Performance Rating of Residential Air Filter Equipment (2017)
AHRI 920 (I-P)-2020
Performance Rating of Direct Expansion-Dedicated Outdoor Air System Units (2020)
AHRI 1060 (I-P)-2018
Performance Rating of Air-to-Air Exchangers for Energy Recovery Ventilation Equipment (2018)
AHRI 1230-2014
Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment (w/Addendum 1)
AHRI 1360 (I-P)-2017
Performance Rating of Computer and Data Processing Room Air Conditioners (2017)
Available from:
Air-Conditioning, Heating and Refrigeration Institute 2311 Wilson Blvd,, Suite 400 Arlington, VA 22203 (703) 524-8800
AIR-CONDITIONING CONTRACTORS OF AMERICA
ANSI/ACCA 2 Manual J-2016
Manual J—Residential Load Calculation, Eighth Edition (2016)
Available from:
Air-Conditioning Contractors of America, Inc. 2800 Shirlington Road, Suite 300 Arlington, VA 22206 www.acca.org (703) 575-4477
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION
CANADIAN STANDARDS ASSOCIATION
WINDOW AND DOOR MANUFACTURERS ASSOCIATION
AAMA/WDMA/ CSA 101/I.S.2/ A440-17
North American Fenestration Standard/Specification for Windows, Doors, and Skylights (2017)
Available from:
AAMA 1827 Walden Office Square, Suite 550 Schaumburg, IL 60173-4268 (847) 303-5664 www.aamanet.org

CSA 5060 Spectrum Way, Suite 100 Mississauga, ON, Canada L4W 5N6 (800) 463-6727 www.csagroup.org

WDMA 2025 M Street, NW, Suite 800 Washington, DC 20036-3309 (202) 367-1157 www.wdma.com
AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
2021 TLVs and BEIs
Threshold Limit Values (TLVS) and Biological Exposure Indices (BEIS)
Available from:
ACGIH 1330 Kemper Meadow Drive Cincinnati, Ohio 45240 (513) 742-2020 www.acgih.org
AMERICAN NATIONAL STANDARDS INSTITUTE
ANSI/AMCA 208-18
Calculation of the Fan Energy Index (2018)
ANSI/AMCA 210-16
Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating (2016)
ANSI/AMCA 500-D-18
Laboratory Methods Of Testing Dampers For Rating (2018)
ANSI/ASABE S640 JUL2017
Quantities and Units of Electromagnetic Radiation for Plants (Photosynthetic Organisms)
ANSI/ASSP Z9.5-2012
Laboratory Ventilation (2012)
ANSI/CTA-2045-B2021
Modular Communications Interface for Energy Management (2018)
ANSI C82.6-2015 (R2020)
American National Standard for Lamp Ballasts—Ballasts for High-Intensity Discharge Lamps—Methods of Measurement (2020)
ANSI/NEMA WD 6-2016
American National Standard for Wiring Devices—Dimensional Specifications (2016)
ANSI Z21.40.4a-1998
(R2017)/CGA 2.94a-M98 (R2017) Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (2017)
ANSI Z21.47-2021/CSA 2.3:21
Gas-Fired Central Furnaces (2021)
ANSI Z83.8-2016/CSA 2.6-2016 (R2021)
Gas Unit Heaters, Gas Packaged Heaters, Gas Utility Heaters and Gas-Fired Duct Furnaces (2016)
Available from:
American National Standards Institute 25 West 43rd Street, 4th floor New York, NY 10036 (212) 642-4900
ANSI/APSP/ICC-5-2011
American National Standard For Residential Inground Swimming Pools (2011 w/Addendum A)
Available from:
Association of Pool & Spa Professionals 2111 Eisenhower Ave. Alexandria, VA 22314 (703) 838-0083
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (NATIONAL PUBLICATIONS)
ANSI/ASHRAE Standard 52.2-2017
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size (2017)
ANSI/ASHRAE Standard 55-2020
Thermal Environment Conditions for Human Occupancy (2020)
ANSI/ASHRAE Standard 62.1-2019
Ventilation for Acceptable Indoor Air Quality (2019)
ANSI/ASHRAE Standard 62.2-2019
Ventilation and Acceptable Indoor Air Quality in Residential Buildings (2019)
ANSI/ASHRAE Standard 84-2020
Method of Testing Air-to-Air Heat/ Energy Exchangers (2020)
ANSI/ASHRAE/IES Standards 90.1-2019
Energy Standards for Buildings Except Low-Rise Residential Buildings (2019)
ANSI/ASHRAE Standard 154-2016
Ventilation for Commercial Cooking Operations (2016)
ANSI/ASHRAE 193-2010 (RA2014)
Method of Test for Determining the Airtightness of HVAC Equipment (RA2014)
ASHRAE Handbooks
HVAC Applications (I-P) (2019)
HVAC Systems and Equipment (I-P) (2020)
Fundamentals (I-P) (2017)
Available from:
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 1791 Tullie Circle N.E. Atlanta, GA 30329 www.ashrae.org
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (REGIONAL PUBLICATION)
ASHRAE Climatic Data for Region X Arizona, California, Hawaii, Nevada, Publication SPCDX, 1982, ISBN #20002196 and Supplement, 1994, ISBN #20002596
Available from:
Order Desk Building News 10801 National Boulevard Los Angeles, CA 90064 (800) 873-6397 or (310) 474-7771 www.bnibooks.com/
AMERICAN SOCIETY OF MECHANICAL ENGINEERS
ASME A17.1-2019/CSA B44:19
Safety Code for Elevators and Escalators (2019)
ASME A112.18.1-2018/CSA B125.1-18
Plumbing Supply Fittings
Available from:
ASME Two Park Avenue New York, NY 10016-5990 (800) 843-2763 http://www.asme.org/
ASSOCIATION OF HOME APPLIANCE MANUFACTURERS
AHAM HRH-2-2020
Residential Kitchen Range Hood Performance Test Procedures (2020)
AHAM RKRH-CPPG-2020
Residential Kitchen Range Hood Certification Program Procedural Guide (2020) Version 3.0
Available from:
Association of Home Appliance Manufacturers 1111 19th Street, NW, Suite 402 Washington, DC 20036 (202) 872-5955 www.aham.org
ASTM INTERNATIONAL (FORMERLY AMERICAN SOCIETY FOR TESTING AND MATERIALS)
ASTM C55-17
Standard Specification for Concrete Building Brick (2017)
ASTM C177-19
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot Plate Apparatus (2019)
ASTM C272/C272M-18
Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions (2018)
ASTM C335/C335M-17
Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation (2017)
ASTM C518-17
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (2017)
ASTM C731-15
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants (2015)
ASTM C732-17
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants (2017)
ASTM C836/C836M-18
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course (2018)
ASTM C1167-11 (2017)
Standard Specification for Clay Roof Tiles (2017)
ASTM C1371-15
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers (2015)
ASTM C1492-03 (2016)
Standard Specification for Concrete Roof Tile (2016)
ASTM C1549-16
Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer (2016)
ASTM C1583/C1583M-20
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) (2020)
ASTM D448-12 (2017)
Standard Classification for Sizes of Aggregate for Road and Bridge Construction (2017)
ASTM D522/D522M-17
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings (2017)
ASTM D822-13 (2018)
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings (2018)
ASTM D1003-21
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics (2021)
ASTM D1653-21
Standard Test Methods for Water Vapor Transmission of Organic Coating Films (2021)
ASTM D1863/D1863M-05(2018)
Standard Specification for Mineral Aggregate Used on Built-Up Roofs (2018)
ASTM D2202-00(2019)
Standard Test Method for Slump of Sealants (2019)
ASTM D2370-16
Standard Test Method for Tensile Properties of Organic Coatings (2016)
ASTM D2824/D2824M-18
Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered and Fibered without Asbestos (2018)
ASTM D3468/D3468M (2020)
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing (2020)
ASTM D3805/D3805M-16
Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings (2016)
ASTM D4798/D4798M-11(2021)
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) (2021)
ASTM D5870-16
Standard Practice for Calculating Property Retention Index of Plastics (2016)
ASTM D6083/D6083M-21
Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing (2021)
ASTM D6694/D6694M-15
Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems (2015)
ASTM E96/E96M-16
Standard Test Methods for Water Vapor Transmission of Materials (2016)
ASTM E283/E283M-19
Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (2019)
ASTM E779-19
Standard Test Method for Determining Air Leakage Rate by Fan Pressurization (2019)
ASTM E903-20
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres (2020)
ASTM E972-96(2021)
Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight (2021)
ASTM E1175-87(2015)
Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere (2015)
ASTM E1677-19
Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls (2019)
ASTM E1680-16
Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems (2016)
ASTM E1918-16
Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field (2016)
ASTM E1980-11 (2019)
Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces (2019)
ASTM E2178-21
Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials (2021)
ASTM E2357-18
Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies (2018)
ASTM E3087-18
Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods (2018)
Available from:
ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 (800) 262-1373 or (610) 832-9500

2022 California Electrical Code

2022 California Mechanical Code
Available from:
California Building Standards Commission 2525 Natomas Park Drive, Suite 130 Sacramento, CA 95833-2936 (916) 263-0916 www.bsc.ca.gov
CALIFORNIA ENERGY COMMISSION
Appliance Efficiency Regulations
Alternative Calculation Method (ACM) Manual
Available from:
California Energy Commission 1516 Ninth Street Sacramento, CA 95814 (916) 654-5106 or (800) 772-3300 (in California) www.energy.ca.gov/title24
CALIFORNIA DEPARTMENT OF CONSUMER AFFAIRS
Standards for Insulating Material
Available from:
California Department of Consumer Affairs Bureau of Household Goods and Services 4244 South Market Court, Suite D Sacramento, California 95834-1243 (916) 999-2041
CERTIFYING ORGANIZATION
CIE 13.3-1995
Method of Measuring and Specifying Colour Rendering Properties of Light Sources (1995)
CIE 015-2018
Technical Report: Colorimetry (2018)
COOLING TECHNOLOGY INSTITUTE
CTI ATC-105 (19)
Acceptance Test Code for Cooling Towers (2019)
CTI ATC-105DS (18)
Acceptance Test Code for Dry Fluid Coolers (2018)
CTI ATC-105S (11)
Acceptance Test Code for Closed-Circuit Cooling Towers (2011)
CTI ATC-106 (11)
Acceptance Test Code for Mechanical Draft Evaporative Vapor Condensers (2011)
CTI STD-201 RS (17)
Standard for the Certification of Water-Cooling Tower Thermal Performance (2017)
Available from:
Cooling Technology Institute 2611 FM 1960 West, Suite A101 Houston, Texas 77068-3730 PO Box 73383 Houston, TX 77273-3383 (281) 583-4087
COOL ROOF RATING COUNCIL
CRRC-1
Product Rating Program Manual (2021)
Available from:
Cool Roof Rating Council 2435 N. Lombard Street Portland, OR 97217 (866) 465-2523 www.coolroofs.org
HOME VENTILATING INSTITUTE
HVI Publication 915-2020
HVI Loudness Testing and Rating Procedure (2020)
HVI Publication 916-2020
HVI Airflow Test Procedure (2020)
HVI Publication 920-2020
HVI Product Performance Certification Procedure Including Verification and Challenge (2020)
Available from:
Home Ventilating Institute 1740 Dell Range Blvd., Suite H, PMB 450 Cheyenne, WY 82009 (855) 484-8368 www.hvi.org
ILLUMINATING ENGINEERING SOCIETY
The IES Lighting LibraryTM
ANSI/IES LM-79-19
Approved Method: Optical and Electrical Measurements of Solid-State Lighting Products (2019)
ANSI/IES LS-1-20
Lighting Science: Nomenclature and Definitions for Illuminating Engineering (2020)
ANSI/IES TM-15-20
Technical Memorandum: Luminaire Classification System for Outdoor Luminaires (2020)
Available from:
Illuminating Engineering Society 120 Wall Street, 17th Floor New York, NY 10005-4026 (212) 248-5000 www.ies.org
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
California Mechanical Code
Available from:
International Association of Plumbing and Mechanical Officials 4755 E. Philadelphia St. Ontario, CA 91761 (800) 85-IAPMO (854-2766) www.iapmo.org
INTERNATIONAL CODE COUNCIL
Available from:
International Code Council Western Regional Office 3060 Saturn St. Brea, CA 92821 (888) 422-7233 www.iccsafe.org
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ISO 5801:2017
Fans—Performance testing using standardized airways (2017)
ISO 13256-1:1998 (RA 2012)
Water-Source Heat Pumps—Testing and Rating for Performance—Part 1: Water-to-Air and Brine-to-Air Heat Pumps (2012)
ISO 13256-2:1998 (RA 2012)
Water-Source Heat pumps—Testing and rating for Performance—Part 2: Water-to-Water and Brine-to-Water Heat Pumps (2012)
ISO/IEC 17025:2017
General Criteria for the Competence of Testing and Calibration Laboratories (2017)
Available from:
ISO Chemin de Blandonnet 8 CP 401 1214 Vernier Geneva, Switzerland
INTERNATIONAL WINDOW FILM ASSOCIATION
Architectural Visual Inspection Standard Window Film (reendorsed 2018)
Available from:
International Window Film Association P.O. Box 3871 Martinsville, VA 24115-3871 276-666-4932
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
NEMA LSD 57-2018
Polyurethane Foam Application: Lighting Equipment (2018)
NEMA SSL 7A-2015
Phase Cut Dimming for Solid State Lighting: Basic Compatibility (2015)
Available from:
1300 North 17th Street, Suite 1752 Rosslyn, VA 22209 708-841-3200 www.nema.org
NATIONAL FENESTRATION RATING COUNCIL
ANSI/NFRC 100-2020
Procedure for Determining Fenestration Product U-factors (2020)
ANSI/NFRC 200-2020
Procedure for Determining Fenestration Product Solar Heat Gain Coefficients and Visible Transmittance at Normal Incidence (2020)
ANSI/NFRC 202-2020
Procedure for Determining Translucent Fenestration Product Visible Transmittance at Normal Incidence (2020)
ANSI/NFRC 203-2020
Procedure for Determining Visible Transmittance of Tubular Daylighting Devices (2020)
ANSI/NFRC 400-2020
Procedure for Determining Fenestration Product Air Leakage (2020)
Available from:
National Fenestration Rating Council 6035 Ivy Lane, Suite 140 Greenbelt, MD 20770 (301) 589-1776 www.NFRC.org Email: info@nfrc.org
NSF INTERNATIONAL (FORMERLY NATIONAL SANITATION FOUNDATION)
NSF/ANSI/CAN 50-2020
Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs, and Other Recreational Water Facilities (2020)
Available from:
NSF International PO Box 130140 Ann Arbor, MI 48113 (735) 769-8010
RESIDENTIAL ENERGY SERVICES NETWORK
ANSI/RESNET/ICC 380-2019
Standard for Testing Airtightness of Building Enclosures, Dwelling Unit, and Sleeping Unit Enclosures, Airtightness of Heating and Cooling Air Distribution Systems, and Airflow of Mechanical Ventilation Systems (2019)
Available from:
Residential Energy Services Network, Inc. (RESNET) P.O. Box 4561 Oceanside, CA 92052-4561 http://resnet.us/
SAE INTERNATIONAL
SAE J1772_201710
SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler (2017)
SHEET METAL AND AIR-CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
Residential Comfort System Installation Standards Manual, Eighth Edition (2016)
ANSI/SMACNA 006-2006
HVAC Duct Construction Standards—Metal and Flexible (2006)
Available from:
Sheet Metal and Air-Conditioning Contractors' National Association (SMACNA) 4201 Lafayette Center Drive Chantilly, VA 20151-1209 (703) 803-2980 www.smacna.org
UNDERWRITERS LABORATORIES / UL
UL 181
Standard for Safety for Factory-made Air Ducts and Connectors (2017)
UL 181A
Standard for Safety for Closure Systems for Use with Rigid Air Ducts (2017)
UL 181B
Standard for Safety for Closure Systems for Use with Flexible Air Ducts and Air Connectors (2017)
UL 723
Standard for Safety for Test for Surface Burning Characteristics of Building Materials (2018)
UL 727
Standard for Safety for Oil-Fired Central Furnaces (2018)
UL 731
Standard for Safety for Oil-Fired Unit Heaters (2018)
UL 1077
Standard for Safety for Supplementary Protectors for Use in Electrical Equipment (2016)
UL 1574
Standard for Safety for Track Lighting Systems (2020)
UL 1598
Standard for Safety for Luminaires (2021)
UL 1741
Standard for Safety for Inverters, Converters, Controllers and Interconnection System Equipment for Safety for Use With Distributed Energy Resources (2021)
UL 1973
Standard for Safety for Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications (2018)
UL 2108
Standard for Safety for Low Voltage Lighting Systems (2019)
UL 8750
Standard for Safety for Light Emitting Diode (LED) Equipment for Use in Lighting Products (2021)
UL 9540
Standard for Safety for Energy Storage Systems and Equipment (2021)
Available from:
UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096 (847) 272-8800
Linked Resources
P
P Premium Feature

This feature is included in the premium subscription. Visit the feature page to learn more.

Learn More
Bookmarks
P
P Premium Feature

This feature is included in the premium subscription. Visit the feature page to learn more.

Learn More