AIR-CONDITIONING, HEATING
AND REFRIGERATION INSTITUTE

AHRI 210/240-08

Performance Rating of Unitary Air Conditioning and Air-Source Heat Pump Equipment (2008 with Addendum 1)

AHRI 310/380-04

Packaged Terminal Air-Conditioners and Heat Pumps (2004)

AHRI 325-98

Ground Water-Source Heat Pumps (1998)

ANSI/AHRI 340/360-07

Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (2007 with Addenda 1 and 2)

ANSI/AHRI 365-09

Commercial and Industrial Unitary Air-Conditioning Condensing Units (2009)

ANSI/AHRI 460-05

Performance Rating of Remote Mechanical-Draft Air-Cooled Refrigerant Condensers (2005)

AHRI 550/590-11

Performance Rating of Water-Chilling Packages Using the Vapor Compression Cycle (2011)

ANSI/AHRI 560-00

Absorption Water Chilling and Water Heating Packages (2000)

AHRI 680

Performance Rating of Residential Air Filter Equipment (2009)

Available from:

Air-Conditioning and Refrigeration Institute 4301 North Fairfax Drive, Suite 425 Arlington VA 22203 (703) 524-8800

AIR-CONDITIONING CONTRACTORS
OF AMERICA

Manual J—Residential Load Calculation, Eighth Edition (2003)

Available from:

Air-Conditioning Contractors of America, Inc.
2800 Shirlington Road, Suite 300
Arlington, VA 22206
www.acca.org (703) 575-4477

AMERICAN ARCHITECTURAL MANUFACTURERS
ASSOCIATION

CANADIAN STANDARDS ASSOCIATION

WINDOW AND DOOR MANUFACTURERS ASSOCIATION

AAMA/WDMA/
CSA 101/I.S.2/
A440-11

NAFS 2011 – North American Fenestration Standard/Specification for Windows, Doors, and Skylights

Available from:

AAMA
1827 Walden Office Square, Suite 550
Schaumburg, IL 60173-4268
(847)303-5664 www.aamanet.org

CSA
5060 Spectrum Way, Suite 100
Mississauga, ON, Canada L4W 5N6
(800)463-6727
www.csagroup.org

WDMA
2025 M Street, NW, Suite 800
Washington, DC 20036-3309
(202)367-1157
www.wdma.com

AMERICAN NATIONAL STANDARDS INSTITUTE

ANSI Z21.10.3-01

Gas Water Heaters, Volume 1, Storage Water Heaters with Input Ratings above 75,000 Btu/h (2001)

NSI Z21.13-00

Gas-Fired Low Pressure Steam and Hot Water Boilers (2000)

ANSI Z21.40.4-96

Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (1996)

ANSI Z21.47-01

Gas-Fired Central Furnaces (2001)

ANSI Z83.8-02

Gas Unit Heaters and Gas-Fired Duct Furnaces (2002)

Available from:

American National Standards Institute
25 West 43rd Street, 4th floor
New York, NY 10036
(212) 642-4900

ANSI/NSPI-5-03

Residential Inground Swimming Pools (2003)

ANSI C82.6-05

Ballasts for High-Intensity Discharge Lamps—Methods of Measurement

Available from:

Association of Pool & Spa Professionals
2111 Eisenhower Ave.
Alexandria, VA 22314
(703) 838-0083

AMERICAN SOCIETY OF HEATING,
REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (NATIONAL PUBLICATIONS)

ASHRAE Standard 52.2 -2012

Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size

ASHRAE Standard 55-2010

Thermal Environment Conditions for Human Occupancy

ASHRAE Standard 62.2-2010

Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ASHRAE Handbooks

Applications Volume, Heating, Ventilating and Air-Conditioning Applications (2011)

Equipment Volume, Heating, Ventilating and Air-Conditioning Systems and Equipment (2008)

Fundamentals Volume, Fundamentals (2009)

Available from:

American Society of Heating, Refrigerating and Air-Conditioning Engineers 1791 Tullie Circle N.E. Atlanta GA 30329 www.ashrae.org

AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (REGIONAL PUBLICATION)

ASHRAE Climatic Data for Region X Arizona, California, Hawaii, Nevada, Publication SPCDX, 1982, ISBN #20002196 and Supplement, 1994, ISBN #20002596

Available from:

Order Desk Building News 10801 National Boulevard Los Angeles CA 90064 (800) 873-6397 or (310) 474-7771 www.bnibooks.com/

AMERICAN SOCIETY OF MECHANICAL ENGINEERS

ASME A112.18.1-2011/CSA B125.1-11

Plumbing Supply Fittings

Available from:

ASME Three Park Avenue New York NY 10016-5990 (800) 843-2763 http://www.asme.org/

ASTM INTERNATIONAL

ASTM C55-14

Standard Specifications for Concrete Brick (2014)

ASTM C177-13

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot Plate Apparatus (2013)

ASTM C272-12

Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions (2012)

ASTM C335-10

Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation (2010)

ASTM C518-10

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (2010)

ASTM C731-10

Standard Test Method for Extrudability, After Package Aging, of Latex Sealants (2010)

ASTM C732-12

Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants (2012)

ASTM C836-12

Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course (2012)

ASTM C1167-11

Standard Specification for Clay Roof Tiles (2011)

ASTM C1371-10

Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers (2010)

ASTM C1492-09

Standard Specification for Concrete Roof Tile (2009)

ASTM C1549-14

Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer (2014)

ASTM C1583-13

Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) (2013)

ASTM D448-12

Standard Classification for Sizes of Aggrerate for Road and Bridge Construction (2012)

ASTM D522-13

Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings (2013)

ASTM D822-13

Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings (2013)

ASTM D1003-13

Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics (2013)

ASTM D1653-13

Standard Test Methods for Water Vapor Transmission of Organic Coating Films (2013)

ASTM D1863-11

Standard Specification for Mineral Aggregate Used on Built-Up Roofs (2011)

ASTM D2370-10

Standard Test Method for Tensile Properties of Organic Coatings (2010)

ASTM D2824-13

Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos (2013)

ASTM D3468-13

Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing (2013)

ASTM D3805-09

Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings (2009)

ASTM D4798-11

Standard Test Method Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) (2011)

ASTM D5870-11

Standard Practice for Calculating Property Retention Index of Plastics (2011)

ASTM D6083-05e1

Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing (2005)

ASTM D6694-13

Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing (2013)

ASTM E96-14

Standard Test Methods for Water Vapor Transmission of Materials (2014)

ASTM E283-12

Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (2012)

ASTM E408-13

Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques (2013)

ASTM E972-13

Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight (2013)

ASTM E1918-15

Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field (2015)

ASTM E1980-1

Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces (2011)

ASTM E2178-13

Standard Test Method for Air Permeance of Building Materials (2013)

ASTM E2357-11

Standard Test Method for Determining Air Leakage of Air Barrier Assemblies (2011)

ASTM E779-10

Standard Test Method for Determining Air Leakage Rate by Fan Pressurization (2010)

ASTM E1677-11

Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls (2011)

Available from:

ASTM International 100 Barr Harbor Drive West Conshohocken PA 19428-2959 (800) 262-1373 or (610) 832-9500

CALIFORNIA BUILDING STANDARDS COMMISSION

California Electrical Code

California Plumbing Code

California Mechanical Code

California Building Code

Available from:

California Building Standards Commission 2525 Natomas Park Drive, Suite 130 Sacramento CA 95833-2936 (916) 263-0916 www.bsc.ca.gov

CALIFORNIA ENERGY COMMISSION

Appliance Efficiency Regulations

Nonresidential Alternative Calculation Method (ACM) Manual

Nonresidential Compliance Manual

Residential Alternative Calculation Method (ACM) Manual

Residential Compliance Manual

New Solar Homes Partnership Guidebook, currently adopted by the Energy Commission

Available from:

California Energy Commission 1516 Ninth Street Sacramento CA 95814 (916) 654-5106 or (800) 772-3300 (in California) www.energy.ca.gov/title24

CALIFORNIA DEPARTMENT OF CONSUMER AFFAIRS

Standards for Insulating Material

Available from:

California Department of Consumer Affairs Bureau of Electronic and Appliance, Home Furnishings and Thermal Insulation 4244 South Market Court, Suite D Sacramento, California 95834-1243 (916) 999-2041

COOLING TECHNOLOGY INSTITUTE

CTI ATC-105-00

Acceptance Test Code for Water Cooling Towers (2000)

CTI STD-201-02

Standard for the Certification of Water-Cooling Tower Thermal Performance (2004)

Available from:

Cooling Technology Institute 2611 FM 1960 West, Suite A101 Houston, Texas 77068-3730 PO Box 73383 Houston TX 77273-3383 (281) 583-4087

COOL ROOF RATING COUNCIL

CRRC-1 Product Rating Program Manual (2014)

Available from:

Cool Roof Rating Council 449 15th Street, Suite 400 Oakland CA 94612 (866) 465-2523 www.coolroofs.org

HYDRONICS INSTITUTE

HI Heating Boiler Standard 86, 6th Edition (1989)

Available from:

Hydronics Institute 35 Russo Place, P.O. Box 218 Berkeley Heights New Jersey 07922 (908) 464-8200

ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA

The IESNA Lighting Handbook, Ninth Edition (2000)

Available from:

IESNA 120 Wall Street, 17th Floor New York NY 10005-4001 (212) 248-5000 Email: iesna@iesna.org

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS

California Mechanical Code

Available from:

International Association of Plumbing and Mechanical Officials 4755 E. Philadelphia St. Ontario CA 91761 (800) 85-IAPMO (854-2766) www.iapmo.org

INTERNATIONAL CODE COUNCIL

California Building Code

Available from:

International Code Council Los Angeles District Office 5360 South Workman Mill Road Whittier CA 90601-2298 (888) 422-7233 www.iccsafe.org

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION

ISO-13256-1 Water-Source Heat Pumps-Testing and Rating for Performance-Part 1: Water-to-Air and Brine-to-Air Heat Pumps (1998)

Available from:

ISO 1, rue de Varembe Case postale 56 CH-1211 Geneve 20 Switzerland

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION

NEMA SSL 7A-2013

“Phase Cut Dimming for Solid State Lighting: Basic Compatibility”

Available from:

1300 North 17th Street, Suite 1752 Rosslyn VA 22209 708-841-3200 www.nema.org

NATIONAL FENESTRATION RATING COUNCIL

NFRC 100

Procedure for Determining Fenestration Product U-factors (2014)

NFRC 200

Procedure for Determining Fenestration Product Solar Heat Gain Coefficients and Visible Transmittance at Normal Incidence (2014)

NFRC 202

Procedure for Determining Translucent Fenestration Product Visible Transmittance at Normal Incidence (2014)

NFRC 203

Procedure for Determining Visible Transmittance of Tubular Daylighting Devices (2014)

NFRC 400

Procedure for Determining Fenestration Product Air Leakage (2014)

Available from:

National Fenestration Rating Council 6035 Ivy Lane, Suite 140 Greenbelt MD 20770 (301) 589-1776 www.NFRC.org Email: info@nfrc.org

NSF INTERNATIONAL (formerly National Sanitation Foundation)

NSF/ANSI 50 (2005)

Circulation System Components and Related Materials for Swimming Pools, Spas/Hot Tubs (2005)

Available from:

NSF International PO Box 130140 Ann Arbor MI 48113 (735) 769-8010

SHEET METAL AND AIR-CONDITIONING CONTRACTORS NATIONAL ASSOCIATION

Residential Comfort System Installation Standards Manual (1998)

Available from:

Sheet Metal and Air-Conditioning Contractors National Association (SMACNA) 4201 Lafayette Center Drive Chantilly VA 20151-1209 (703) 803-2980 ww.smacna.org

UNDERWRITERS LABORATORIES

UL 181

Standard for Safety for Factory-made Air Ducts and Connectors (1996)

UL 181A

Standard for Safety for Closure Systems for Use with Rigid Air Ducts and Air Connectors (1994)

UL 18IB

Standard for Safety for Closure Systems for Use with Flexible Air Ducts and Air Connectors (1995)

UL 723

Standard for Test for Surface Burning Characteristics of Building Materials (1996)

UL 727

Standard for Oil-Fired Central Furnaces (1994)

UL 731

Standard for Oil-Fired Unit Heaters (1995)

UL 1574

Track Lighting Systems (2000)

UL 1598

Standard for Luminaires (2000)

UL 2108

Low Voltage Lighting Systems (2008)

Available from:

Underwriters Laboratories 333 Pfingsten Road Northbrook IL 60062-2096 (847) 272-8800

Resources