UpCodes logo
Table of contentsContents

Chapter 8 Referenced Standards

User note:
About this chapter: Chapter 8 lists the full title, edition year and address of the promulgator for all standards that are referenced in the code. The section numbers in which the standards are referenced are also listed.
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.8.
ANSI
American National Standards Institute
25 West 43rd Street
4th Floor
New York, NY 10036
ANSI FC 1—2012:
Stationary Fuel Cell Power Systems
633.1
ANSI NGV 5.1—2015:
Residential Fueling Appliances
413.4.1
LC 1/CSA 6.26—2013:
Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)
403.5.5
ANSI LC-4/CSA 6.32—2012:
Press-connect Metallic Fittings for Use in Fuel Gas Distribution Systems
403.10.1, 403.10.2, 403.10.3
Z21.1—2010:
Household Cooking Gas Appliances
623.1
Z21.8—94 (R2002):
Installation of Domestic Gas Conversion Burners
619.1
Z21.10.1/CSA 4.1—2012:
Gas Water Heaters—Volume I—Storage, Water Heaters with Input Ratings of 75,000 Btu per Hour or Less
624.1
Z21.10.3/CSA 4.3—2011:
Gas Water Heaters—Volume III—Storage, Water Heaters with Input Ratings above 75,000 Btu per Hour, Circulating and Instantaneous
624.1
Z21.11.2—2011:
Gas-fired Room Heaters—Volume II—Unvented Room Heaters
621.1
Z21.13/CSA 4.9—2011:
Gas-fired Low-pressure Steam and Hot Water Boilers
631.1
Z21.15/CSA 9.1—2009:
Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves
Table 409.1.1
Z21.19/CSA 1.4—02(R2007):
Refrigerators Using Gas (R1999) Fuel
625.1
Z21.24/CSA 6.10—2006:
Connectors for Gas Appliances
411.1, 411.3
Z21.40.1/CGA 2.91—1996 (R2011):
Gas-fired Heat Activated Air Conditioning and Heat Pump Appliances
627.1
Z21.40.2/CGA 2.92—1996 (R2011):
Gas-fired Work Activated Air Conditioning and Heat Pump Appliances (Internal Combustion)
627.1
Z21.42—2014:
Gas-fired Illuminating Appliances
628.1
Z21.47/CSA 2.3—2012:
Gas-fired Central Furnaces
618.1
Z21.50/CSA 2.22—2016:
Vented Gas Fireplaces
604.1
Z21.54—2009:
Gas Hose Connectors for Portable Outdoor Gas-fired Appliances
411.1
Z21.56/CSA 4.7—2017:
Gas-fired Pool Heaters
617.1
Z21.58/CSA 1.6—2013:
Outdoor Cooking Gas Appliances
623.1
Z21.60/CSA 2.26—2012:
Decorative Gas Appliances for Installation in Solid-fuel Burning Fireplaces
602.1
Z21.61—1983 (R2004):
Gas-fired Toilets
626.1
Z21.69/CSA 6.16—2009:
Connectors for Movable Gas Appliances
411.1.1, 411.1.4
Z21.75/CSA 6.27—2007:
Connectors for Outdoor Gas Appliances and Manufactured Homes
411.1, 411.2
Z21.80/CSA 6.22—2011:
Line Pressure Regulators
410.1
Z21.84—2012:
Manually Lighted, Natural Gas Decorative Gas Appliances for Installation in Solid Fuel Burning Fireplaces
602.1, 602.2
Z21.86/CSA 2.32—2008:
Vented Gas-fired Space Heating Appliances
608.1, 609.1, 622.1
Z21.88/CSA 2.33—2016:
Vented Gas Fireplace Heaters
605.1
Z21.91—2007:
Ventless Firebox Enclosures for Gas-fired Unvented Decorative Room Heaters
621.7.1
Z21.93/CSA 6.30—2013:
Excess Flow Valves for Natural and LP Gas with Pressures up to 5 psig
410.4
Z21.97—2012:
Outdoor Decorative Appliances
636.1
Z83.4/CSA 3.7—2012:
Nonrecirculating Direct-gas-fired Industrial Air Heaters
611.1
Z83.8/CSA 2.6—2009:
Gas Unit Heater, Gas Packaged Heater, Gas Utility Heaters and Gas-fired Duct Furnaces
610.1, 620.1
Z83.11/CSA 1.8—2013:
Gas Food Service Equipment
623.1
Z83.18—2012:
Recirculating Direct Gas-fired Industrial Air Heaters
612.1
Z83.19—2001(R2009):
Gas-fired High-intensity Infrared Heaters
630.1
Z83.20—2008:
Gas-fired Low-intensity Infrared Heaters
630.1
ASME
American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
B1.20.1—2013:
Pipe Threads, General Purpose (inch)
403.9
B16.1—2010:
Gray Iron Pipe Flanges and Flanged Fittings, Class 25, 125 and 250
403.12.1
B16.5—2015:
Pipe Flanges and Flanged Fittings: NPS 1/2 through NFPS 24 Metric/Inch Standard
403.12.2
B16.24—2016:
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500 and 2500
403.12.3
B16.42—2016:
Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
403.12.4
B16.47—2016:
Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard
403.12.2
B16.33—2012:
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig (Sizes 1/2 through 2)
Table 409.1.1
B16.44—2012:
Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 psi
Table 409.1.1
B36.10M—(R2015):
Welded and Seamless Wrought-steel Pipe
403.4.2
BPVC—2015:
ASME Boiler & Pressure Vessel Code (2007 Edition)
631.1
CSD-1—2016:
Controls and Safety Devices for Automatically Fired Boilers
631.1
ASTM
ASTM International
100 Barr Harbor Drive, P.O. Box C700
West Conshohocken, PA 19428-2959
A53/A53M—12:
Specification for Pipe, Steel, Black and Hot Dipped Zinc-coated Welded and Seamless
403.4.2
A106/A106M—14:
Specification for Seamless Carbon Steel Pipe for High-temperature Service
403.4.2
A254—12:
Specification for Copper Brazed Steel Tubing
403.5.1
A268—10:
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
403.5.2
A269—15:
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
403.5.2
A312—15:
Standard Specification for Seamless, Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes
403.4.2
B88—14:
Specification for Seamless Copper Water Tube
403.5.3
B210—12:
Specification for Aluminum and Aluminum-alloy Drawn Seamless Tubes
403.5.4
B241/B241M—12e1:
Specification for Aluminum and Aluminum-alloy, Seamless Pipe and Seamless Extruded Tube
403.4.4, 403.5.4
B280—13:
Standard Specification for Seamless Copper Tube for Air-Conditioning and Refrigeration Field Service
403.5.3
C315—07(2011):
Specification for Clay Flue Liners and Chimney Pots
501.12
D2513—14e1:
Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing and Fittings
403.6, 403.6.1, 403.11, 404.17.2
E136—16:
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
202
F1973—13e1:
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
404.17.2
F2945—15:
Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing and Fittings
403.6
CSA
CSA Group
8501 East Pleasant Valley Road
Cleveland, OH 44131-5516
CSA 8—93:
Requirements for Gas-fired Log Lighters for Wood Burning Fireplaces
603.1
ANSI/CSA NGV 5.1—2015:
Residential Fueling Appliances
413.4.1
DOTn
U.S. Department of Transportation
400 Seventh St. SW
Washington, DC 20590
49 CFR, Parts 192.281(e) & 192.283 (b)—(2009):
Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards
403.6.1
ICC
International Code Council, Inc.
500 New Jersey Ave, NW
6th Floor
Washington, DC 20001
IFC—18:
International Fire Code®
201.3, 413.1, 413.3, 413.3.1, 413.5, 413.9.2.5, 633.1, 701.1, 701.2, 703.2, 703.2.2, 703.3.8, 703.4, 703.5, 704.1.2, 704.3, 704.4, 706.2, 706.3, 707.1, 707.2, 708.1
MSS
Manufacturers Standardization Society of
the Valve and Fittings Industry
127 Park Street, NE
Vienna, VA 22180
ANSI SP 58—2009:
Pipe Hangers and Supports—Materials, Design and Manufacture
407.2
NFPA
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
30A—18:
Code for Motor Fuel Dispensing Facilities and Repair Garages
305.4, 305.10
37—18:
Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
616.1
70—17:
National Electrical Code
306.3.1, 306.4.1, 306.5.2, 309.2, 310.2.4, 413.9.2.4
82—14:
Incinerators, Waste and Linen Handling Systems and Equipment
503.2.5, T503.4, 607.1
85—15:
Boiler and Combustion Systems Hazards Code
631.1
88A—15:
Parking Structures
305.9
211—16:
Standard for the Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances
503.5.2, 503.5.3, 503.5.6.1, 503.5.6.3
409—16:
Standard for the Aircraft Hangars
305.11
853—15:
Installation of Stationary Fuel Cell Power Systems
633.1
UL
UL LLC
333 Pfingsten Road
Northbrook, IL 60062
103—2010:
Factory-built Chimneys, Residential Type and Building Heating Appliances—with Revisions through July 2012
503.5.1, 506.1
127—2011:
Factory-built Fireplaces—with Revisions through May 2015
621.7
441—2010:
Gas Vents—with Revisions through June 2014
502.1, 503.6.1
641—2010:
Type L Low-temperature Venting Systems—with Revisions through June 2013
502.1
651—2011:
Schedule 40 and 80 Rigid PVC Conduit and Fittings—with Revisions through May 2014
403.6.3
795—2011:
Commercial-industrial Gas Heating Equipment—with Revisions through November 2013
610.1, 618.1, 631.1
959—2010:
Medium Heat Appliance Factory-built Chimneys—with Revisions through June 2014
506.3
1618—09:
Wall Protectors, Floor Protectors and Hearth Extensions—with Revisions through October 2015
308.2
1738—2010:
Venting Systems for Gas Burning Appliances, Categories II, III and IV—with Revisions through November 2014
502.1, 503.4.1
1777—2007:
Chimney Liners—with Revisions through October 2015
501.12, 501.15.4
2200—2012:
Stationary Engine Generator Assemblies—with Revisions through July 2015
616.1