// CODE SNIPPET
G2428.2.4 (504.2.4) Zero Lateral
JUMP TO FULL CODE CHAPTER
Zero (0) lateral (L) shall apply only to a straight vertical vent attached to a top outlet draft hood or flue collar.
Related Code Sections
G2428.2.4 Fuel Gas, (504.2.4) Zero Lateral
Zero (0) lateral (L) shall apply only to a straight vertical vent attached to a top outlet draft hood or flue collar ...
Residential Code 2018 of Kansas > 24 Fuel Gas > G2428 (504) Sizing of Category I Appliance Venting Systems > G2428.2 (504.2) Application of Single-Appliance Vent Tables G2428.2(1) and G2428.2(2) > G2428.2.4 (504.2.4) Zero Lateral
504.2.4 Chimneys and Vents, Zero Lateral
Zero (0) lateral ( L ) shall apply only to a straight vertical vent attached to a top outlet draft hood or flue collar ...
Fuel Gas Code 2018 of Kansas > 5 Chimneys and Vents > 504 (IFGS) Sizing of Category I Appliance Venting Systems > 504.2 Application of Single-Appliance Vent Tables 504.2(1) Through 504.2(6) > 504.2.4 Zero Lateral
R502.7 Floors, Lateral Restraint at Supports
by the manufacturer's recommendations. In Seismic Design Categories D 0 , D 1 and D 2 , lateral restraint shall be provided at each intermediate support ...
Residential Code 2018 of Kansas > 5 Floors > R502 Wood Floor Framing > R502.7 Lateral Restraint at Supports
Section 1807 Soils and Foundations, Foundation Walls, Retaining Walls and Embedded Posts and Poles
loads, 1.0 times other nominal loads , and investigation with one or more of the variable loads set to zero. The safety factor against lateral ...
Building Code 2018 of Kansas > 18 Soils and Foundations > 1807 Foundation Walls, Retaining Walls and Embedded Posts and Poles
R606.2.8.3 Wall Construction, Masonry in Seismic Design Categories D0, D1 and D2
Mortar for masonry serving as the lateral-force-resisting system in Seismic Design Categories D 0 , D 1 and D 2 shall be Type M or S Portland ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.2 Masonry Construction Materials > R606.2.8 Mortar > R606.2.8.3 Masonry in Seismic Design Categories D0, D1 and D2