// CODE SNIPPET

301.1.2 Work Area Compliance Method

Existing Building Code 2015 of Utah > 3 Provisions for All Compliance Methods > 301 Administration > 301.1 General > 301.1.2 Work Area Compliance Method

JUMP TO FULL CODE CHAPTER

Repairs, alterations, additions, changes in occupancy and relocated buildings complying with the applicable requirements of Chapters 5 through 13 of this code shall be considered in compliance with the provisions of this code.

Related Code Sections

301.1.2 Provisions for All Compliance Methods, Work Area Compliance Method

of this code shall be considered in compliance with the provisions of this code ...

Existing Building Code 2015 of Utah > 3 Provisions for All Compliance Methods > 301 Administration > 301.1 General > 301.1.2 Work Area Compliance Method

301.3.2 Provisions for All Compliance Methods, Work area compliance method

be considered in compliance with the provisions of this code ...

Existing Building Code 2018 of Utah > 3 Provisions for All Compliance Methods > 301 Administration > 301.3 Alteration, addition or change of occupancy > 301.3.2 Work area compliance method

503.11 Prescriptive Compliance Method, Substantial structural alteration

Where the work area exceeds 50 percent of the building area and where work involves a substantial structural alteration , the lateral load ...

Existing Building Code 2018 of Utah > 5 Prescriptive Compliance Method > 503 Alterations > 503.11 Substantial structural alteration

1301.3.3 Performance Compliance Methods, Compliance with flood hazard provisions

In flood hazard areas , buildings that are evaluated in accordance with this section shall comply with Section 1612 of the International Building ...

Existing Building Code 2018 of Utah > 13 Performance Compliance Methods > 1301 General > 1301.3 Acceptance > 1301.3.3 Compliance with flood hazard provisions

503.9 Prescriptive Compliance Method, Bracing for unreinforced masonry parapets in major alterations

Where the work area exceeds 50 percent of the building area, and where the building is assigned to Seismic Design Category C, D, E or F, parapets ...

Existing Building Code 2018 of Utah > 5 Prescriptive Compliance Method > 503 Alterations > 503.9 Bracing for unreinforced masonry parapets in major alterations

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes