// CODE SNIPPET
1910.219(o)(2) Wood Guards
JUMP TO FULL CODE CHAPTER
Wood guards may be used in the woodworking and chemical industries, in industries where the presence of fumes or where manufacturing conditions would cause the rapid deterioration of metal guards; also in construction work and in locations outdoors where extreme cold or extreme heat make metal guards and railings undesirable. In all other industries, wood guards shall not be used.
Related Code Sections
1910.219(o)(2) Machinery and Machine Guarding, Wood Guards
Wood guards may be used in the woodworking and chemical industries, in industries where the presence of fumes or where manufacturing conditions would ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(o) Approved Materials > 1910.219(o)(2) Wood Guards
1910.266(f)(8) Special Industries, Guarding
with guarding to protect employees from flying wood chunks, logs, chips, bark, limbs and other material in accordance with the requirements of subpart O ...
OSHA 1910 General Industry > R Special Industries > 1910.266 Logging Operations > 1910.266(f) Machines > 1910.266(f)(8) Guarding
1910.213(m)(1) Machinery and Machine Guarding,
The cutting heads of each wood shaper, hand-fed panel raiser, or other similar machine not automatically fed, shall be enclosed with a cage ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(m) Wood Shapers and Similar Equipment > 1910.213(m)(1)
1910.219 Machinery and Machine Guarding, Mechanical Power-Transmission Apparatus
Wood guards may ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus
1910.213(o)(4) Machinery and Machine Guarding,
Lathes used for turning long pieces of wood stock held only between the two centers shall be equipped with long curved guards extending over the tops ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(o) Profile and Swing-Head Lathes and Wood Heel Turning Machine > 1910.213(o)(4)