// CODE SNIPPET
[BS] 1403.3 Wood
JUMP TO FULL CODE CHAPTER
Exterior walls of wood construction shall be designed and constructed in accordance with Chapter 23.
Basic hardboard shall conform to the requirements of ANSI A135.4.
Hardboard siding shall conform to the requirements of ANSI A135.6 and, where used structurally, shall be so identified by the label of an approved agency.
Related Code Sections
1403.3 Exterior Walls, Wood
Exterior walls of wood construction shall be designed and constructed in accordance with Chapter 23 ...
Chapter 23 Wood
User notes:
About this chapter: Chapter 23 provides minimum requirements for the design of buildings and structures that use wood and wood ...
1404.5 Exterior Walls, Wood Veneers
Wood veneers on exterior walls of buildings of Type I, II, III and IV construction shall be not less than 1 inch (25 mm) nominal thickness, 0.438 ...
Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.5 Wood Veneers
1507.8 Roof Assemblies and Rooftop Structures, Wood Shingles
The installation of wood shingles shall comply with the provisions of this section and Table 1507.8. TABLE 1507.8 WOOD SHINGLE AND SHAKE ...
Building Code 2018 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.8 Wood Shingles
1705.11.1 Special Inspections and Tests, Structural Wood
inspection is required for nailing, bolting, anchoring and other fastening of elements of the main windforce-resisting system, including wood shear walls ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.11 Special Inspections for Wind Resistance > 1705.11.1 Structural Wood