// CODE SNIPPET
604.1.1 Within Duels or Plenums
JUMP TO FULL CODE CHAPTER
Materials installed within ducts and plenums for insulating, sound deadening,
or other purposes shall have a mold, humidity, and erosion-resistant surface where tested in accordance with
UL 181. Duct liners in systems operating with air velocities
exceeding 2000 feet per minute (10.16 m/s) shall be
fastened with both adhesive and mechanical fasteners,
and exposed edges shall have approved treatment to
withstand the operating velocity. Where the internal insulation
is capable of being in contact with condensates or
other liquids, the material shall be water-resistant.
Related Code Sections
604.1.1 Duct Systems, Within Duels or Plenums
Materials installed within ducts and plenums for insulating, sound deadening,
or other purposes shall have a mold, humidity, and erosion-resistant ...
Los Angeles Mechanical Code > 6 Duct Systems > 604.0 Insulation of Ducts > 604.1 General > 604.1.1 Within Duels or Plenums
1104.2.3.2 Refrigeration, Plenums
The space above a suspended
ceiling shall not be included in calculating the refrigerant
quantity limit in the system unless such space
is part ...
Los Angeles Mechanical Code > 11 Refrigeration > 1104.0 Requirements for Refrigerant and Refrigeration System Use > 1104.2 Refrigerant Concentration Limit > 1104.2.3 Ventilated Spaces > 1104.2.3.2 Plenums
1104.2.3.2 Refrigeration, Plenums
The space above a suspended
ceiling shall not be included in calculating
the refrigerant quantity limit in the system unless
such space is part ...
Los Angeles Mechanical Code > 11 Refrigeration > 1104.0 Requirements for Refrigerant and Refrigeration System Use > 1104.2 Refrigerant Concentration Limit > 1104.2.3 Ventilated Spaces > 1104.2.3.2 Plenums
2604.1.1 Plastic, Plenums
Foam plastics installed in plenums as interior wall or ceiling finish shall comply with Section 2603.7. Foam plastics installed in plenums ...
Los Angeles Building Code > 26 Plastic > 2604 Interior Finish and Trim > 2604.1 General > 2604.1.1 Plenums
604.1.1 Duct Systems, Within Ducts or Plenums
Materials installed
within ducts and plenums for insulating, sound deadening,
or other purposes shall have a mold, humidity, and erosion-resistant ...
Los Angeles Mechanical Code > 6 Duct Systems > 604.0 Insulation of Ducts > 604.1 General > 604.1.1 Within Ducts or Plenums