// CODE SNIPPET
1910.305(g)(1)(ii)(F) Wiring of Cranes and Hoists
OSHA 1910 General Industry > S Electrical > 1910.305 Wiring Methods, Components, and Equipment for General Use > 1910.305(g) Flexible Cords and Cables > 1910.305(g)(1) Use of Flexible Cords and Cables > 1910.305(g)(1)(ii) Flexible Cords and Cables May Be Used Only For: > 1910.305(g)(1)(ii)(F) Wiring of Cranes and Hoists
Related Code Sections
1910.305(g)(1)(ii)(F) Electrical, Wiring of Cranes and Hoists
OSHA 1910 General Industry > S Electrical > 1910.305 Wiring Methods, Components, and Equipment for General Use > 1910.305(g) Flexible Cords and Cables > 1910.305(g)(1) Use of Flexible Cords and Cables > 1910.305(g)(1)(ii) Flexible Cords and Cables May Be Used Only For: > 1910.305(g)(1)(ii)(F) Wiring of Cranes and Hoists
1910.254(c)(2)(iii) Welding, Cutting, and Brazing,
Chains, wire ropes, cranes, hoists, and elevators shall not be used to carry welding current ...
1910.306(b) Electrical, Cranes and Hoists
This paragraph applies to the installation of electric equipment and wiring used in connection with cranes, monorail hoists, hoists, and all runways ...
1910.265(c)(24)(v)(b) Special Industries,
Wire rope removed from service due to defects shall be plainly marked or identified as being unfit for further use on cranes, hoists, and other load ...
1910.179(h) Materials Handling and Storage, Hoisting Equipment—
using hoisting ropes, the crane manufacturer's recommendation shall be followed. The rated load divided by the number of parts of rope shall not exceed ...