// CODE SNIPPET
1513.2 Wire
Go To Full Code Chapter
Wire for attaching slate shingles and clay or concrete tile shall be copper, brass or stainless steel capable of supporting four times the weight of tile.
Wire supporting a single tile or shingle shall not be smaller than 1/16 inch (1.6 mm) in diameter. Continuous wire ties supporting more than one tile shall not be smaller than 0.084 inch (2 mm) in diameter.
Upcodes Diagrams
Related Code Sections
1513.2 Roof Assemblies and Rooftop Structures, Wire
Wire for attaching slate shingles and clay or concrete tile shall be copper, brass or stainless steel capable of supporting four times the weight ...
1513.2 Roof Assemblies and Rooftop Structures, Wire
Wire for attaching slate shingles and clay or concrete tile shall be copper, brass or stainless steel capable of supporting four times the weight ...
410.117 Equipment for General Use, Wiring
Conductors that have insulation suitable for the temperature encountered shall be used ...
410.117 Equipment for General Use, Wiring
Conductors that have insulation suitable for the temperature encountered shall be used ...
(B) Special Occupancies, Wiring
Raceways, cable trays, and other wiring methods for intrinsically safe system wiring shall be identified with permanently affixed labels ...