// CODE SNIPPET
1910.261(k)(31) Winder Area
JUMP TO FULL CODE CHAPTER
A nonskid surface shall be provided in the front vicinity of the winder to prevent accidental slipping.
Related Code Sections
1910.261(k)(31) Special Industries, Winder Area
A nonskid surface shall be provided in the front vicinity of the winder to prevent accidental slipping ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(31) Winder Area
1910.261(k) Special Industries, Machine Room
Oil cups and grease fittings shall be placed in a safe area remote from nip and heat ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room
1910.261(l)(9) Special Industries, Finishing Room Rewinders
The nipping points of all drum winders and rewinders located on the operator's side shall be guarded by either automatic or manually operated barrier ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room > 1910.261(l)(9) Finishing Room Rewinders
1910.1001(e) Toxic and Hazardous Substances, Regulated Areas
The employer shall establish regulated areas wherever airborne concentrations of asbestos and/or PACM are in excess of the TWA and/or excursion limit ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1001 Asbestos > 1910.1001(e) Regulated Areas
1910.1017(e) Toxic and Hazardous Substances, Regulated Area
Access to regulated areas shall be limited to authorized persons ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1017 Vinyl Chloride > 1910.1017(e) Regulated Area