// CODE SNIPPET
906.10 Wind Protection
Related Code Sections
906.10 Installation of Specific Appliances, Wind Protection
Floor furnaces shall be protected, where necessary, against severe wind conditions. [NFPA 54:10.11.10] ...
2018 Uniform Mechanical Code of Nevada > 9 Installation of Specific Appliances > 906.0 Floor Furnaces > 906.10 Wind Protection
R612.6 Wall Construction, Wind-Borne Debris Protection
Protection of exterior windows and glass doors in buildings located in wind-borne debris regions shall be in accordance with Section R301.2.1.2 ...
Residential Code 2012 of Nevada > 6 Wall Construction > R612 Exterior Windows and Doors > R612.6 Wind-Borne Debris Protection
1609.2.2 Structural Design, Application of ASTM E1996
The text of Section 6.2.2 of ASTM E1996 shall be substituted as follows: 6.2.2 Unless otherwise specified, select the wind zone based on the basic ...
Building Code 2018 of Nevada > 16 Structural Design > 1609 Wind Loads > 1609.2 Protection of Openings > 1609.2.2 Application of ASTM E1996
(4) Equipment for General Use, Multispeed Motor
For a multispeed motor, a single short-circuit and ground-fault protective device shall be permitted for two or more windings of the motor, provided ...
National Electrical Code 2017 of Nevada > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.52 Rating or Setting for Individual Motor Circuit > (C) Rating or Setting > (4) Multispeed Motor
R403.4.1 [RE] Residential Energy Efficiency, Protection of Piping Insulation
Piping insulation exposed to weather shall be protected from damage, including that caused by sunlight, moisture, equipment maintenance and wind. The ...
Energy Conservation Code 2018 of Nevada > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.4 Mechanical System Piping Insulation (Mandatory) > R403.4.1 Protection of Piping Insulation