UpCodes logo
Go To Full Code Chapter
Walks and sidewalks subject to this chapter shall have a continuous common surface, not interrupted by steps or by abrupt changes in level exceeding 1/2 inch (12.7 mm). (See Section 1111A).
Walking surfaces shall be stable, firm and slip resistant, and shall comply with Section 1110A.3.
1113A.1.1 Width
Walks and sidewalks shall be a minimum of 48 inches (1219 mm) in width, except that walks serving an individual dwelling unit in covered multifamily buildings may be reduced to 36 inches (914 mm) in clear width except at doors.
1113A.1.2 Surface Cross Slopes
Surface cross slopes shall not exceed 1 unit vertical in 48 units horizontal (2.083-percent slope).

Related Code Sections

1113A.1 Housing Accessibility, Width and Continuous Surface
Walks and sidewalks subject to this chapter shall have a continuous common surface, not interrupted by steps or by abrupt changes in level exceeding ...
1113A.1 Housing Accessibility, Width and Continuous Surface
Walks and sidewalks subject to this chapter shall have a continuous common surface, not interrupted by steps or by abrupt changes in level exceeding ...
1113A.1 Housing Accessibility, Width and Continuous Surface
Walks and sidewalks subject to this chapter shall have a continuous common surface, not interrupted by steps or by abrupt changes in level exceeding ...
1113A.1.1 Housing Accessibility, Width
Walks and sidewalks shall be a minimum of 48 inches (1219 mm) in width, except that walks serving an individual dwelling unit in covered multifamily ...