// CODE SNIPPET
1926.1423(e)(1) When Moving Point-To-Point:
JUMP TO FULL CODE CHAPTER
On non-lattice booms (whether horizontal or not horizontal).
On horizontal lattice booms where the fall distance is 15 feet or more.
Related Code Sections
1926.1423(e)(1) Cranes & Derricks in Construction, When Moving Point-To-Point:
On non-lattice booms (whether horizontal or not horizontal ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1423 Fall Protection > 1926.1423(e) > 1926.1423(e)(1) When Moving Point-To-Point:
1926.964(a)(3) Electric Power Transmission and Distribution, Setting and Moving Poles
When a pole is set, moved, or removed near an exposed energized overhead conductor, the pole may not contact the conductor ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.964 Overhead Lines and Live-Line Barehand Work > 1926.964(a) General > 1926.964(a)(3) Setting and Moving Poles
1926.403(j)(3)(ii) Electrical, Lighting Outlets and Points of Control
or other equipment. The points of control shall be so located that persons are not likely to come in contact with any live part or moving part ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(j) Over 600 Volts, Nominal > 1926.403(j)(3) Workspace About Equipment > 1926.403(j)(3)(ii) Lighting Outlets and Points of Control
1926.452(j)(2) Scaffolds,
Poles shall be secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary. When the pump ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(j) Pump Jack Scaffolds > 1926.452(j)(2)
1926.750(b)(1) Steel Erection,
iron and similar materials; and moving point-to-point while performing these activities ...