// CODE SNIPPET
E3803.10 Wet Locations
JUMP TO FULL CODE CHAPTER
The interior of enclosures or raceways installed underground shall be considered to be a wet location. Insulated conductors and cables installed in such enclosures or raceways in underground installations shall be listed for use in wet locations. Connections or splices in an underground installation shall be approved for wet locations.
Related Code Sections
903.7 Built-In Elements, Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water ...
903.7 Built-In Elements, Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water ...
E3803.10 Wiring Methods, Wet Locations
The interior of enclosures or raceways installed underground shall be considered to be a wet location. Insulated conductors and cables installed ...
2017 FBC - Residential, 6th edition > 38 Wiring Methods > E3803 Underground Installation Requirements > E3803.10 Wet Locations
E3803.10 Wiring Methods, Wet Locations
The interior of enclosures or raceways installed underground shall be considered to be a wet location. Insulated conductors and cables installed ...
2014 FBC - Residential, 5th edition > 38 Wiring Methods > E3803 Underground Installation Requirements > E3803.10 Wet Locations
E3905.11 Power and Lighting Distribution, Damp or Wet Locations
In damp or wet locations, boxes, conduit bodies and fittings shall be placed or equipped so as to prevent moisture from entering or accumulating ...
2017 FBC - Residential, 6th edition > 39 Power and Lighting Distribution > E3905 Boxes, Conduit Bodies and Fittings > E3905.11 Damp or Wet Locations