UpCodes logo
Go To Full Code Chapter
1910.110(b)(4)(i)
Welding to the shell, head, or any other part of the container subject to internal pressure, shall be done in compliance with the code under which the tank was fabricated. Other welding is permitted only on saddle plates, lugs, or brackets attached to the container by the tank manufacturer.
1910.110(b)(4)(ii)
Where repair or modification involving welding of DOT containers is required, the container shall be returned to a qualified manufacturer making containers of the same type, and the repair or modification made in compliance with DOT regulations.
Upcodes Diagrams

Related Code Sections

1910.110(b)(4) Hazardous Materials, Welding of Containers
Welding to the shell, head, or any other part of the container subject to internal pressure, shall be done in compliance with the code under which ...
1910.252(c)(1)(vi)(C) Welding, Cutting, and Brazing,
Brazing and gas welding fluxes containing fluorine compounds shall have a cautionary wording to indicate that they contain fluorine compounds. One ...
1910.252(c)(1)(v) Welding, Cutting, and Brazing,
, as a minimum, on tags, boxes, or other containers: Do not use in areas without adequate ventilation. See ANSI Z49.1-1967 Safety in Welding, Cutting ...