// CODE SNIPPET
§104-11 Welders
JUMP TO FULL CODE CHAPTER
(a) Qualifications. An applicant for a welder license shall satisfy the qualification and examination requirements of the Administrative Code by complying with the following requirements:
(1) Applicants shall furnish to the Department a welder certification issued by the American Welding Society or the State of New York. The applicant shall provide to the Department a copy of the certification, a copy of future re-certifications and documentation of new certifications acquired. The applicable certification shall be maintained continuously for the duration of the license term and shall authorize performance of the type of welds the licensee performs.
(2) Applicants shall provide evidence of fitness to perform the work authorized to be performed by a holder of the license sought. Such evidence shall consist of documentation on a form prescribed by the Department that the applicant has passed a visual acuity test effective for the term of the license sought.
(b) Fitness requirements for renewal and reinstatement. As a condition of license renewal or reinstatement, a licensed or previously licensed welder shall provide evidence of fitness to perform the work authorized to be performed by a holder of the license held or once held by the licensee. Such evidence shall consist of:
(1) A welder certification issued by the American Welding Society or the State of New York. The licensed or previously licensed welder shall provide to the Department a copy of the certification, a copy of future re-certifications and documentation of new certifications acquired. The applicable certification shall be maintained continuously for the duration of the license term and shall authorize performance of the type of welds the licensee performs.
(2) Documentation on a form prescribed by the Department that the licensee has passed a visual acuity test effective for the term of the license held or once held by the licensee.
(3) A renewal applicant shall satisfy the requirements of this subdivision at every subsequent renewal.
Related Code Sections
Article 407 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work, Welder License
licensed as a welder under the provisions of this article ...
NYC General Admin. Provisions 2008 > 4 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work > 407 Welder License
Article 407 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work, Welder License
licensed as a welder under the provisions of this article ...
NYC General Admin. Provisions 2014 > 4 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work > 407 Welder License
406.1.1.1 Gas Piping Installations, Welder's Qualifications
Welders installing gas piping within buildings at any pressure shall comply with the following: Welders shall be qualified for all pipe sizes, wall ...
NYC Fuel Gas Code 2014 > 4 Gas Piping Installations > 406 Inspection, Testing and Purging > 406.1 General > 406.1.1 Inspections > 406.1.1.1 Welder's Qualifications
406.1.1.1 Gas Piping Installations, Welder's Qualifications
Welders installing gas piping within buildings at any pressure shall be qualified for all pipe sizes, wall thicknesses and all positions ...
NYC Fuel Gas Code 2008 > 4 Gas Piping Installations > 406 Inspection, Testing and Purging > 406.1 General > 406.1.1 Inspections > 406.1.1.1 Welder's Qualifications
§28-407.4 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work, Insurance Exemption
Unless otherwise required by rule, licensed welders are exempt from the insurance requirements of section 28-401.9 ...
NYC General Admin. Provisions 2008 > 4 Licensing and Registration of Businesses, Trades and Occupations Engaged in Building Work > 407 Welder License > §28-407.4 Insurance Exemption