// CODE SNIPPET
1907.5.3 Welded Wire Reinforcement
JUMP TO FULL CODE CHAPTER
Welded wire reinforcement with wire size not greater than W5 or D5 used in slabs not exceeding 10 feet (3048 mm) in span is permitted to be curved from a point near the top of the slab over the support to a point near the bottom of the slab at midspan, provided such reinforcement is either continuous over, or securely anchored at support.
Related Code Sections
1907.5.3 Concrete, Welded Wire Reinforcement
Welded wire reinforcement with wire size not greater than W5 or D5 used in slabs not exceeding 10 feet (3048 mm) in span is permitted to be curved ...
NYC Building Code 2014 > 19 Concrete > 1907 Details of Reinforcement > 1907.5 Placing Reinforcement > 1907.5.3 Welded Wire Reinforcement
2103.11.4 Masonry, Wire Fabric
Wire fabric shall conform to ASTM A 185 for plain steel-welded wire fabric for concrete reinforcement or ASTM A 496 for welded deformed steel wire ...
NYC Building Code 2008 > 21 Masonry > 2103 Masonry Construction Materials > 2103.11 Metal Reinforcement and Accessories > 2103.11.4 Wire Fabric
2212.3 Steel, Composite Construction
) on center. Welded wire fabric reinforcement in concrete slabs shall be continuous over all supports and in all spans. Minimum area of continuous ...
NYC Building Code 2014 > 22 Steel > 2212 Structural Integrity Requirements > 2212.3 Composite Construction
2213.3 Steel, Composite Construction
of a button punch every 24 inches (610 mm) on center. 4. Welded wire fabric reinforcement in concrete slabs shall be continuous over all ...
NYC Building Code 2008 > 22 Steel > 2213 Structural Integrity Requirements > 2213.3 Composite Construction
Article 19 Reinforced Concrete and Plain Concrete Construction [PDF] (page 44)
on centers. Welded wire reinforcement for walls shall be in flat sheet form. i. In addition to the minimum as prescribed in section C26-1543.0h ...