// CODE SNIPPET
R306.4 Water Supply to Fixtures
Related Code Sections
R306.4 Building Planning, Water Supply to Fixtures
Plumbing fixtures shall be connected to an approved water supply. Kitchen sinks, lavatories, bathtubs, showers, bidets, laundry tubs and washing ...
Residential Code 2018 of Kansas > 3 Building Planning > R306 Sanitation > R306.4 Water Supply to Fixtures
607.2 Water Supply and Distribution, Hot or Tempered Water Supply to Fixtures
The developed length of hot or tempered water piping, from the source of hot water to the fixtures that require hot or tempered water ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 607 Hot Water Supply System > 607.2 Hot or Tempered Water Supply to Fixtures
715.2.3 Sanitary Drainage, Water Supply Fixture Units
Water supply fixture units shall be based on the values in Chapter 6 of this code, except that the water supply fixture unit for a vacuum-type water ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 715 Vacuum Drainage Systems > 715.2 System Design > 715.2.3 Water Supply Fixture Units
P2903.6 Water Supply and Distribution, Determining Water Supply Fixture Units
Supply loads in the building water distribution system shall be determined by total load on the pipe being sized, in terms of water supply fixture ...
Residential Code 2018 of Kansas > 29 Water Supply and Distribution > P2903 Water Supply System > P2903.6 Determining Water Supply Fixture Units
C404.5.2.1 [CE] Commercial Energy Efficiency, Water Volume Determination
contained within fixture shutoff valves, within flexible water supply connectors to a fixture fitting and within a fixture fitting shall not be included ...
Energy Conservation Code 2018 of Kansas > 4 [CE] Commercial Energy Efficiency > C404 Service Water Heating (Mandatory) > C404.5 Heated Water Supply Piping > C404.5.2 Maximum Allowable Pipe Volume Method > C404.5.2.1 Water Volume Determination