// CODE SNIPPET
413.4 Water Supply for Flush Tanks
Go To Full Code Chapter
An adequate quantity of water shall be provided to flush and clean the fixture served. The water supply for flushing tanks and flushometer tanks equipped for manual flushing shall be controlled by a float valve or other automatic device designed to refill the tank after each discharge and to shut completely off the water flow to the tank where the tank is filled to operational capacity. Provision shall be made to automatically supply water to the fixture to refill the trap seal after each flushing.
Upcodes Diagrams
Related Code Sections
413.4 Plumbing Fixtures and Fixture Fittings, Water Supply for Flush Tanks
An adequate quantity of water shall be provided to flush and clean the fixture served. The water supply for flushing tanks and flushometer tanks ...
Section P2712 Plumbing Fixtures, Water Closets
into the flush tank shall be prohibited. Water closets equipped with a dual flushing device shall comply with ASME A112.19.14 ...
E 505.4 Manufactured/Mobile Home Parks and Recreational Vehicle Parks, Flushing Device
Where the recreational vehicle park is provided with a piped water supply system, means for flushing the recreational vehicle holding tank ...
601.2 Water Supply and Distribution, Water Supply and Flushing
Each plumbing fixture shall be provided with an adequate supply of potable running water piped thereto in an approved manner, so arranged as to flush ...
P2712.5 Plumbing Fixtures, Overflows in Flush Tanks
Flush tanks shall be provided with overflows discharging to the water closet connected thereto and such overflow shall be of sufficient size ...