// CODE SNIPPET
917.4.1 Water Closet Connection
Related Code Sections
425.4 Fixtures, Faucets and Fixture Fittings, Water Closet Connections
A 4-inch by 3-inch (102 mm by 76 mm) closet bend shall be acceptable. Where a 3-inch (76 mm) bend is utilized on water closets, a 4-inch by 3-inch ...
Plumbing Code 2018 of Kansas > 4 Fixtures, Faucets and Fixture Fittings > 425 Water Closets > 425.4 Water Closet Connections
917.4.1 Vents, Water Closet Connection
Water closet connections shall be not greater than 4 feet (1219 mm) in developed length measured horizontally from the stack . Exception: Where ...
Plumbing Code 2018 of Kansas > 9 Vents > 917 Single-Stack Vent System > 917.4 Length of Horizontal Branches > 917.4.1 Water Closet Connection
P3005.1.4 Sanitary Drainage, Water Closet Connection Between Flange and Pipe
One-quarter bends 3 inches (76 mm) in diameter shall be acceptable for water closet or similar connections, provided that a 4-inch by 3-inch (102 mm ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3005 Drainage System > P3005.1 Drainage Fittings and Connections > P3005.1.4 Water Closet Connection Between Flange and Pipe
P2712.5 Plumbing Fixtures, Overflows in Flush Tanks
Flush tanks shall be provided with overflows discharging to the water closet connected thereto and such overflow shall be of sufficient size ...
Residential Code 2018 of Kansas > 27 Plumbing Fixtures > P2712 Water Closets > P2712.5 Overflows in Flush Tanks
706.3 Sanitary Drainage, Installation of Fittings
or appliances with pumping action discharge. Exception: Back-to-back water closet connections to double sanitary tees shall be permitted where ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 706 Connections Between Drainage Piping and Fittings > 706.3 Installation of Fittings