// CODE SNIPPET
803.1 Waste Water Temperature
JUMP TO FULL CODE CHAPTER
Steam pipes shall not connect to any part of a drainage or plumbing system and water above 140°F (60°C) shall not be discharged into any part of a drainage system. Such pipes shall discharge into an indirect waste receptor connected to the drainage system.
Related Code Sections
803.1 Indirect/Special Waste, Waste Water Temperature
Steam pipes shall not connect to any part of a drainage or plumbing system and water above 140°F (60°C) shall not be discharged into any part ...
Plumbing Code 2012 of Tennessee > 8 Indirect/Special Waste > 803 Special Wastes > 803.1 Waste Water Temperature
701.7 Sanitary Drainage, Connections
Direct connection of a steam exhaust, blowoff or drip pipe shall not be made with the building drainage system. Waste water where discharged ...
P2603.6 General Plumbing Requirements, Freezing
In localities having a winter design temperature of 32°F (0°C) or lower as shown in Table R301.2(1) of this code, a water, soil or waste pipe shall ...
Residential Code 2009 of Tennessee > 26 General Plumbing Requirements > P2603 Structural and Piping Protection > P2603.6 Freezing
P2603.5 General Plumbing Requirements, Freezing
In localities having a winter design temperature of 32°F (0°C) or lower as shown in Table R301.2(1) of this code, a water, soil or waste pipe shall ...
Residential Code 2018 of Tennessee > 26 General Plumbing Requirements > P2603 Structural and Piping Protection > P2603.5 Freezing
*2.13-1.3.4 Specific Requirements for Mobile/Transportable Medical Units, Site Utilities
of water and waste services to the unit. The ...
2018 Guidelines for Design and Construction of Outpatient Facilities of Tennessee > 2.13 Specific Requirements for Mobile/Transportable Medical Units > 2.13-1 General > 2.13-1.3 Site > *2.13-1.3.4 Site Utilities