• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

1910.252(b)(4)(vii) Warning sign

OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General requirements > 1910.252(b) Protection of personnel > 1910.252(b)(4) Work in confined spaces > 1910.252(b)(4)(vii) Warning sign
JUMP TO FULL CODE CHAPTER
After welding operations are completed, the welder shall mark the hot metal or provide some other means of warning other workers.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


1910.1001(j)(4) Toxic and Hazardous Substances, Warning signs—
Warning signs shall be provided and displayed at each regulated area. In addition, warning signs shall be posted at all approaches to regulated areas ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1001 Asbestos > 1910.1001(j) Communication of hazards to employees -- Introduction > 1910.1001(j)(4) Warning signs—
1910.1024(m)(2) Toxic and Hazardous Substances, Warning signs
The employer must ensure that the warning signs required by paragraph (m)(2)(i) of this standard are legible and readily visible ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1024 Beryllium > 1910.1024(m) Communication of hazards— > 1910.1024(m)(2) Warning signs
1910.1027(m)(2) Toxic and Hazardous Substances, Warning signs
Warning signs shall be provided and displayed in regulated areas. In addition, warning signs shall be posted at all approaches to regulated areas so ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1027 Cadmium > 1910.1027(m) Communication of cadmium hazards to employees > 1910.1027(m)(2) Warning signs
1910.252(b)(4)(vii) Welding, Cutting, and Brazing, Warning sign
After welding operations are completed, the welder shall mark the hot metal or provide some other means of warning other workers ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General requirements > 1910.252(b) Protection of personnel > 1910.252(b)(4) Work in confined spaces > 1910.252(b)(4)(vii) Warning sign
1910.1028(j)(2) Toxic and Hazardous Substances, Warning signs and labels
The employer shall post signs at entrances to regulated areas. The signs shall bear the following legend: DANGER BENZENE MAY CAUSE CANCER ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1028 Benzene > 1910.1028(j) Communication of hazards > 1910.1028(j)(2) Warning signs and labels
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms