// CODE SNIPPET
1310.6.8 Wall Sleeve
JUMP TO FULL CODE CHAPTER
Where underground piping is installed through a wall sleeve, the outdoor end of the sleeve shall be sealed to prevent the entrance of groundwater into the building. [NFPA 99:5.1.10.11.5.10]
Related Code Sections
1310.6.8 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Wall Sleeve
Where underground piping is installed through a wall sleeve, the outdoor end of the sleeve shall be sealed to prevent the entrance of groundwater ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1310.0 Installation of Piping > 1310.6 Backfilling and Trenching > 1310.6.8 Wall Sleeve
P2603.4 General Plumbing Requirements, Pipes Through Foundation Walls
A pipe that passes through a foundation wall shall be provided with a relieving arch, or a pipe sleeve shall be built into the foundation wall. The ...
Residential Code 2012 of Nevada > 26 General Plumbing Requirements > P2603 Structural and Piping Protection > P2603.4 Pipes Through Foundation Walls
P2603.4 General Plumbing Requirements, Pipes Through Foundation Walls
A pipe that passes through a foundation wall shall be provided with a relieving arch, or a pipe sleeve shall be built into the foundation wall. The ...
Residential Code 2018 of Nevada > 26 General Plumbing Requirements > P2603 Structural and Piping Protection > P2603.4 Pipes Through Foundation Walls
316.7 General Regulations, Sleeves
Sleeves shall be provided to protect piping through concrete and masonry walls and concrete floors. Exception: Sleeves shall not be required where ...
2018 Uniform Mechanical Code of Nevada > 3 General Regulations > 316.0 Protection of Piping, Tubing, Materials, and Structures > 316.7 Sleeves
312.10 General Regulations, Sleeves
Sleeves shall be provided to protect piping through concrete and masonry walls, and concrete floors. Exception: Sleeves shall not be required ...
2018 Uniform Plumbing Code of Nevada > 3 General Regulations > 312.0 Protection of Piping, Materials, and Structures > 312.10 Sleeves