// CODE SNIPPET
506.7.7.3 Wall Protectors That Cover Two Walls
JUMP TO FULL CODE CHAPTER
Thermal shielding that covers two walls in a corner
shall be permitted to be open at the top and bottom
edges with not less than 1 inch (25.4 mm) air gap.
[NFPA 91:4.6.4.7.3]
Related Code Sections
506.7.7.3 Exhaust Systems, Wall Protectors That Cover Two Walls
Thermal shielding that covers two walls in a corner
shall be permitted to be open at the top and bottom
edges with not less than 1 inch (25.4 mm) air ...
California Mechanical Code 2016 > 5 Exhaust Systems > 506.0 Product-Conveying Ducts > 506.7 Duct Clearances > 506.7.7 Reduced Clearance > 506.7.7.3 Wall Protectors That Cover Two Walls
(2) Communications Systems, Fused Primary Protectors
location of the primary protector, where required, shall comply with (B)(1), (B)(2), or (B)(3):
A listed primary protector shall be applied on each ...
California Electrical Code 2019 > 8 Communications Systems > 830 Network-Powered Broadband Communications Systems > 830.90 Primary Electrical Protection > (A) Application > (2) Fused Primary Protectors
(3) Special Occupancies, Protectors
Enclosures shall be provided for lightning protective devices and for fuses. Such enclosures shall be permitted to be of the general-purpose type ...
California Electrical Code 2019 > 5 Special Occupancies > 501 Class I Locations > 501.150 Signaling, Alarm, Remote-Control, and Communications Systems > (B) Class I, Division 2 > (3) Protectors
(2) Equipment for General Use, Thermal Protector
A thermal protector integral with the motor, approved for use with the motor it protects on the basis that it will prevent dangerous overheating ...
California Electrical Code 2019 > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.32 Continuous-Duty Motors > (A) More Than 1 Horsepower > (2) Thermal Protector
Chapter 7 Wall Covering
CALIFORNIA RESIDENTIAL CODE — MATRIX ADOPTION TABLE
CHAPTER 7 — WALL COVERING
(Matrix ...