// CODE SNIPPET
324.4.4 Wall Girts
Go To Full Code Chapter
Wall girts shall be not less than 2 × 4 inches nominal and spaced not more than twenty-four (24) inches on center.
Upcodes Diagrams
Related Code Sections
324.4.4 Building Planning, Wall Girts
Wall girts shall be not less than 2 × 4 inches nominal and spaced not more than twenty-four (24) inches on center ...
328.4.4 Building Planning, Wall Girts
Wall girts shall be not less than 2 x 4 inches nominal and spaced not more than twenty-four (24) inches on center ...
328.7 Building Planning, Attachment Details
Dipped Galvanized
Each block
Skirt board to post
2-16d Hot Dipped Galvanized
Face nail
Wall girt to post
2-16d Hot Dipped ...
328.2 Building Planning, Definition
) and secondary members (wood roof purlins, wall girts, bracing & sheathing) where all loads are transmitted from the sheathing and the secondary members ...
328.4.6 Building Planning, Bracing
brace required due to excessive length, must lap over two consecutive wall girts ...