// CODE SNIPPET
2603.4.1.3 Walk-In Coolers
JUMP TO FULL CODE CHAPTER
In nonsprinklered buildings, foam plastic having a thickness that does not exceed 4 inches (102 mm) and a maximum flame spread index of 75 is permitted in walk-in coolers or freezer units where the aggregate floor area does not exceed 400 square feet (37 m2) and the foam plastic is covered by a metal facing not less than 0.032-inch-thick (0.81 mm) aluminum or corrosion-resistant steel having a minimum base metal thickness of 0.016 inch (0.41 mm). A thickness of up to 10 inches (254 mm) is permitted where protected by a thermal barrier.
Related Code Sections
2603.4.1.3 Plastic, Walk-In Coolers
is permitted in walk-in coolers or freezer units where the aggregate floor area does not exceed 400 square feet (37 m 2 ) and the foam plastic is covered ...
Los Angeles Building Code > 26 Plastic > 2603 Foam Plastic Insulation > 2603.4 Thermal Barrier > 2603.4.1 Thermal Barrier Not Required > 2603.4.1.3 Walk-In Coolers
2603.4.1.3 Plastic, Walk-In Coolers
is permitted in walk-in coolers or freezer units where the aggregate floor area does not exceed 400 square feet (37 m 2 ) and the foam plastic is covered ...
Los Angeles Building Code > 26 Plastic > 2603 Foam Plastic Insulation > 2603.4 Thermal Barrier > 2603.4.1 Thermal Barrier Not Required > 2603.4.1.3 Walk-In Coolers
801.3.2 Indirect Wastes, Walk-In Coolers
For walk-in coolers, floor
drains shall be permitted to be connected to a separate
drainage line discharging into an outside receptor. The
flood ...
Los Angeles Plumbing Code > 8 Indirect Wastes > 801.0 General > 801.3 Food and Beverage Handling Establishments > 801.3.2 Walk-In Coolers
934.2 Installation of Specific Appliances, Unit Coolers
Factory-built unit coolers for use in refrigerators, freezers, refrigerated warehouses, and walk-in
coolers shall comply with UL 412 and installed ...
Los Angeles Mechanical Code > 9 Installation of Specific Appliances > 934.0 Refrigeration Appliances > 934.2 Unit Coolers
935.2 Installation of Specific Appliances, Unit Coolers
Factory-built unit coolers for use in
refrigerators, freezers, refrigerated warehouses, and walk-in
coolers shall comply with UL 412 and installed ...
Los Angeles Mechanical Code > 9 Installation of Specific Appliances > 935.0 Refrigeration Appliances > 935.2 Unit Coolers