// CODE SNIPPET
(E) Voltage Rating
JUMP TO FULL CODE CHAPTER
A controller with a straight voltage rating, for example, 240 volts or 480 volts, shall be permitted to be applied in a circuit in which the nominal voltage between any two conductors does not exceed the controller's voltage rating. A controller with a slash rating, for example, 120/240 volts or 480Y/277 volts, shall only be applied in a solidly grounded circuit in which the nominal voltage to ground from any conductor does not exceed the lower of the two values of the controller's voltage rating and the nominal voltage between any two conductors does not exceed the higher value of the controller's voltage rating.
Related Code Sections
(E) Equipment for General Use, Voltage Rating
A controller with a straight voltage rating, for example, 240 volts or 480 volts, shall be permitted to be applied in a circuit in which the nominal ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.83 Ratings > (E) Voltage Rating
(3) Equipment for General Use, Voltage Rating
The maximum voltage rating of power fuses shall not be less than the maximum circuit voltage. Fuses having a minimum recommended operating voltage ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.21 Circuit-Interrupting Devices > (B) Power Fuses and Fuseholders > (3) Voltage Rating
(C) Special Conditions, Voltage and Temperature Ratings
The cable shall have a voltage rating of not less than 300 volts. The cable shall have a temperature rating of not less than 60°C (140 °F) ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 760 Fire Alarm Systems > 760.179 Listing and Marking of PLFA Cables and Insulated Continuous Line-Type Fire Detectors > (C) Voltage and Temperature Ratings
240.85 Wiring and Protection, Applications
A circuit breaker with a straight voltage rating, such as 240V or 480V, shall be permitted to be applied in a circuit in which the nominal voltage ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.85 Applications
110.4 General, Voltages
Throughout this Code, the voltage considered shall be that at which the circuit operates. The voltage rating of electrical equipment shall ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.4 Voltages