// CODE SNIPPET
(G) Voltage and Frequency Control
Related Code Sections
(G) Special Conditions, Voltage and Frequency Control
The stand-alone or isolated microgrid supply shall be controlled so that voltage and frequency remain within suitable limits for the connected loads ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 710 Stand-Alone Systems > 710.15 General > (G) Voltage and Frequency Control
(E) Wiring and Protection, Different Characteristics
Additional feeders or branch circuits shall be permitted for different voltages, frequencies, or phases, or for different uses such as control ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.30 Number of Supplies > (E) Different Characteristics
220.127.116.11.4 General Requirements, Change in Power Supply
(a) change in voltage, frequency, or number of phases; (b) change from direct current to alternating current, or vice versa; or (c) change ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.7 Alterations > 8.7.3 Alterations to Hydraulic Elevators > 18.104.22.168 Operating Devices and Control Equipment > 22.214.171.124.4 Change in Power Supply
675.6 Special Equipment, Marking on Main Control Panel
The main control panel shall be provided with a nameplate giving the following information: The manufacturer's name, the rated voltage, the phase ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 675 Electrically Driven or Controlled Irrigation Machines > 675.6 Marking on Main Control Panel