// CODE SNIPPET
P3006.1 Vertical Offsets
Related Code Sections
P3006.1 Sanitary Drainage, Vertical Offsets
An offset in a vertical drain, with a change of direction of 45 degrees (0.79 rad) or less from the vertical, shall be sized as a straight vertical ...
2015 Michigan Residential Code > 30 Sanitary Drainage > P3006 Sizing of Drain Pipe Offsets > P3006.1 Vertical Offsets
710.1.2 Sanitary Drainage, Vertical Stack Offsets
Vertical stack offsets shall be sized as required for straight stacks in accordance with Table 710.1(2), except where required to be sized ...
2015 Michigan Plumbing Code > 7 Sanitary Drainage > 710 Drainage System Sizing > 710.1 Maximum Fixture Unit Load > 710.1.2 Vertical Stack Offsets
2308.4.4.2 Wood, Vertical Offsets in Floor Diaphragms in Seismic Design Categories D and E
In Seismic Design Categories D and E, portions of a floor level shall not be vertically offset such that the framing members on either side ...
2015 Michigan Building Code > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.4 Floor Framing > 2308.4.4 Framing Around Openings > 2308.4.4.2 Vertical Offsets in Floor Diaphragms in Seismic Design Categories D and E
G2428.3.5 Fuel Gas, (504.3.5) Common Vertical Vent Offset
Where the common vertical vent is offset , the maximum capacity of the common vent shall be reduced in accordance with Section G2428.3.6. The ...
2015 Michigan Residential Code > 24 Fuel Gas > G2428 (504) Sizing of Category I Appliance Venting Systems > G2428.3 (504.3) Application of Multiple Appliance Vent Tables G2428.3(1) Through G2428.3(4) > G2428.3.5 (504.3.5) Common Vertical Vent Offset
711.1.1 Sanitary Drainage, Omission of Vents for Vertical Stack Offsets
Vents for vertical offsets required by Section 711.1 shall not be required where the stack and its offset are sized as a building drain [see ...
2015 Michigan Plumbing Code > 7 Sanitary Drainage > 711 Offsets in Drainage Piping in Buildings of Five Stories or More > 711.1 Horizontal Branch Connections Above or Below Vertical Stack Offsets > 711.1.1 Omission of Vents for Vertical Stack Offsets