// CODE SNIPPET
[BS] A113.5.2 Vertical Bracing Members
JUMP TO FULL CODE CHAPTER
Vertical bracing members shall be attached to floor and roof construction for their design loads independently of required wall anchors. Horizontal spacing of vertical bracing members shall not exceed one-half of the unsupported height of the wall or 10 feet (3048 mm). Deflection of such bracing members at design loads shall not exceed one-tenth of the wall thickness.
Related Code Sections
A113.5.2 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings, Vertical Bracing Members
Vertical bracing members shall be attached to floor and roof construction for their design loads independently of required wall anchors. Horizontal ...
2015 Michigan Rehabilitation Code > A1 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings > A113 Detailed System Design Requirements > A113.5 Wall Bracing > A113.5.2 Vertical Bracing Members
R505.1 Floors, Cold-Formed Steel Floor Framing
maximum tolerance shall be 3 / 4 inch (19.1 mm) between the centerline of the horizontal framing member and the centerline of the vertical framing ...
2015 Michigan Residential Code > 5 Floors > R505 Cold-Formed Steel Floor Framing > R505.1 Cold-Formed Steel Floor Framing
2308.6.4 Wood, Braced Wall Panel Construction
are spaced 16 inches (406 mm) on center and covering two stud spaces where studs are spaced 24 inches (610 mm) on center. Braced wall panels less ...
2015 Michigan Building Code > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.6 Wall Bracing > 2308.6.4 Braced Wall Panel Construction
R602.10.8 Wall Construction, Braced Wall Panel Connections
joists are parallel to a braced wall panel above or below, a rim joist, end joist or other parallel framing member shall be provided directly above ...
2015 Michigan Residential Code > 6 Wall Construction > R602 Wood Wall Framing > R602.10 Wall Bracing > R602.10.8 Braced Wall Panel Connections
2303.4.1.1 Wood, Truss Design Drawings
in the truss members; Required permanent individual truss member restraint location and the method and details of restraint/bracing to be used in accordance ...
2015 Michigan Building Code > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.1 Design > 2303.4.1.1 Truss Design Drawings