// CODE SNIPPET
[F] 2001.3.1 Vertical and Horizontal Clearance for Fire Department Apparatus
JUMP TO FULL CODE CHAPTER
Vertical and horizontal clearance shall permit the unimpeded access of fire department apparatus inclusive of the capability for one apparatus to pass another apparatus set up and in operation.
Related Code Sections
2001.3.1 Emergency Notification, Access and Facilities, Vertical and Horizontal Clearance for Fire Department Apparatus
Vertical and horizontal clearance shall permit the unimpeded access of fire department apparatus inclusive of the capability for one apparatus ...
Performance Code for Buildings and Facilities 2018 of South Holland > 20 Emergency Notification, Access and Facilities > 2001 Emergency Notification, Access and Facilities > 2001.3 Performance Requirements > 2001.3.1 Vertical and Horizontal Clearance for Fire Department Apparatus
2001.3.1 Emergency Notification, Access and Facilities, Vertical and Horizontal Clearance for Fire Department Apparatus
Vertical and horizontal clearance shall permit the unimpeded access of fire department apparatus inclusive of the capability for one apparatus ...
Performance Code for Buildings and Facilities 2012 of South Holland > 20 Emergency Notification, Access and Facilities > 2001 Emergency Notification, Access and Facilities > 2001.3 Performance Requirements > 2001.3.1 Vertical and Horizontal Clearance for Fire Department Apparatus
Section 3406 Tire Rebuilding and Tire Storage, Fire Department Access
Fire apparatus access roads shall be located within all pile clearances identified in Section 3405.4 and within all ...
Section 3406 Tire Rebuilding and Tire Storage, Fire Department Access
Fire apparatus access roads shall be located within all pile clearances identified in Section 3405.4 and within all ...
(2) Wiring and Protection, Vertical Clearance
The vertical clearance of final spans above, or within 900 mm (3 ft) measured horizontally of, platforms, projections, or surfaces from which ...
National Electrical Code 2014 of South Holland > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.19 Clearances From Buildings for Conductors of Not Over 1000 Volts, Nominal > (D) Final Spans > (2) Vertical Clearance