// CODE SNIPPET
(A) Ventilation and Maintenance
JUMP TO FULL CODE CHAPTER
Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes, can be readily accomplished.
Exception: Ventilation shall not be required for submersible types of motors.
Related Code Sections
(A) Equipment for General Use, Ventilation and Maintenance
Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.14 Location of Motors > (A) Ventilation and Maintenance
R403.5.16 [RE] Residential Energy Efficiency, Documentation
Documentation, which includes proper operation and maintenance instructions, shall accompany all mechanical ventilation systems. The documentation ...
Minnesota Energy Code 2015 > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.5 Mechanical Ventilation (Mandatory) > R403.5.16 Documentation
Chapter 30 Industrial Ovens
User note: About this chapter: Chapter 30 addresses the fuel supply, ventilation, emergency shutdown equipment, fire protection and the operation ...
1024.7 Means of Egress, Ventilation
Equipment and ductwork for exit passageway ventilation as permitted by Section 1024.6 shall comply with one of the following: The equipment ...