// CODE SNIPPET
P-1204.2 Vent Through Roof
JUMP TO FULL CODE CHAPTER
Indirect waste stacks receiving fixtures on more than one floor or waste pipes longer
than 100 feet, or those draining more than one trapped fixture shall be vented through the roof as required by Chapter
11.
Figure P-1204.2
INDIRECT WASTE STACKS
Related Code Sections
P-1204.2 Indirect and Special Waste, Vent Through Roof
shall be vented through the roof as required by Chapter
11.
Figure P-1204.2
INDIRECT WASTE STACKS
...
Philadelphia Plumbing Code > 12 Indirect and Special Waste > P-1204 Venting of Indirect Waste > P-1204.2 Vent Through Roof
P-906.2.1 Soil and Waste Piping, Tank Venting
The tank shall be vented through the roof with galvanized wrought iron, galvanized yoloy,
or copper vent pipe not less than two inches in size ...
Philadelphia Plumbing Code > 9 Soil and Waste Piping > P-906 Condensate and Blowoff Connections > P-906.2 Tank Size > P-906.2.1 Tank Venting
M1804.2.1 Chimneys and Vents, Through the Roof
Vents passing through a roof shall extend through flashing and terminate in accordance with the manufacturer's installation requirements ...
2018 Philadelphia Residential Code > 18 Chimneys and Vents > M1804 Vents > M1804.2 Termination > M1804.2.1 Through the Roof
P-1103.4.1 Vents and Venting, Above Roof
Extensions of vent pipes through a roof shall be terminated at least 2 feet above the roof
surface and shall be properly flashed. Where the roof ...
Philadelphia Plumbing Code > 11 Vents and Venting > P-1103 Protection of Trap Seals > P-1103.4 Location of Vent Terminals > P-1103.4.1 Above Roof
503.6.7 Chimneys and Vents, Roof Terminations
Gas vents shall extend through the roof flashing, roof jack or roof thimble and terminate with a listed cap or listed roof assembly ...
2018 Philadelphia Fuel Gas Code > 5 Chimneys and Vents > 503 (IFGS) Venting of Appliances > 503.6 Gas Vents > 503.6.7 Roof Terminations