// CODE SNIPPET
805.8 Vent
JUMP TO FULL CODE CHAPTER
Each tank shall be provided with a vent not less than 2 inches (51 mm) in diameter and shall extend not less than 12 inches (305 mm) above finished grade, terminating with a return bend fitting or approved vent cap.
Related Code Sections
1301.9.8 Nonpotable Water Systems, Venting
Storage tanks shall be provided with a vent sized in accordance with Chapter 9 and based on the aggregate diameter of all tank influent pipes. The ...
Plumbing Code 2015 > 13 Nonpotable Water Systems > 1301 General > 1301.9 Nonpotable Water Storage Tanks > 1301.9.8 Venting
2404.15.2 Tents and Other Membrane Structures, Venting
Gas, liquid and solid fuel-burning equipment designed to be vented shall be vented to the outside air as specified in the International Fuel Gas ...
Fire Code 2009 > 24 Tents and Other Membrane Structures > 2404 Temporary and Permanent Tents and Membrane Structures > 2404.15 Heating and Cooking Equipment > 2404.15.2 Venting
3003.1.4 Elevators and Conveying Systems, Venting
Where standby power is connected to elevators, the machine room ventilation or air conditioning shall be connected to the standby power source ...
International Building Code 2018 > 30 Elevators and Conveying Systems > 3003 Emergency Operations > 3003.1 Standby Power > 3003.1.4 Venting
3003.1.4 Elevators and Conveying Systems, Venting
Where standby power is connected to elevators, the machine room ventilation or air conditioning shall be connected to the standby power source ...
International Building Code 2015 > 30 Elevators and Conveying Systems > 3003 Emergency Operations > 3003.1 Standby Power > 3003.1.4 Venting
3003.1.4 Elevators and Conveying Systems, Venting
Where standby power is connected to elevators, the machine room ventilation or air conditioning shall be connected to the standby power source ...
International Building Code 2012 > 30 Elevators and Conveying Systems > 3003 Emergency Operations > 3003.1 Standby Power > 3003.1.4 Venting