// CODE SNIPPET
Related Code Sections
16188.8.131.52 Structural Design, Veneers
The deflection shall not exceed l/600 for veneered walls, anchored veneers and adhered veneers over 1 inch (25 mm) thick, including the mortar ...
Los Angeles Building Code > 16 Structural Design > 1616 Additional Requirements for Community Colleges [DSA-SS/CC] > 1616.2 General Design Requirements > 1616.2.1 Lateral Load Deflections > 16184.108.40.206 Veneers
Section 8-811 Archaic Materials and Methods of Construction, Veneers
Terra cotta, cast stone and natural stone veneers shall be investigated for the presence of suitable anchorage. Steel anchors shall be investigated ...
California Historical Building Code 2016 > 8-8 Archaic Materials and Methods of Construction > 8-811 Veneers
A113.7 Guidelines for the Seismic Retrofit of Existing Buildings, Veneer
Veneer shall be anchored with approved anchor ties conforming to the required design capacity specified in the building code and shall be placed ...
Los Angeles Existing Building Code > A Guidelines for the Seismic Retrofit of Existing Buildings > A113 Detailed System Design Requirements > A113.7 Veneer
1405.10.1.4.3 Exterior Walls, Adhering Veneer
The masonry veneer units shall be adhered to the mortar scratch coat with a nominal 1 / 2 -inch-thick (12.7 mm) setting bed of mortar complying ...
Los Angeles Building Code > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.10 Adhered Masonry Veneer > 1405.10.1 Exterior Adhered Masonry Veneer > 1405.10.1.4 Adhered Masonry Veneer Installed With Lath and Mortar > 1405.10.1.4.3 Adhering Veneer
1411.2 Exterior Walls, Adhered Veneer
Units of tile, masonry, stone or terra cotta which exceed 5 / 8 inch (16 mm) in thickness shall be applied as for anchored veneer where used over ...
Los Angeles Building Code > 14 Exterior Walls > 1411 [DSA-SS & DSA-SS/CC, OSHPD 1 & 4] Additional Requirements for Anchored and Adhered Veneer > 1411.2 Adhered Veneer