// CODE SNIPPET
P-904.2 Values for Fixtures Not Listed
JUMP TO FULL CODE CHAPTER
Fixture unit values for fixtures that are not listed in Table P-904.1 and cannot be determined by similarity to a fixture listed therein shall be determined by Table P-904.2.
|Required Fixture Drain or Trap Size||Fixture Unit Value|
|Private Installations||Public Installations|
Related Code Sections
P-904.2 Soil and Waste Piping, Values for Fixtures Not Listed
Fixture unit values for fixtures that are not listed in Table P-904.1 and cannot be determined by similarity to a fixture listed therein shall ...
Philadelphia Plumbing Code > 9 Soil and Waste Piping > P-904 Sizes > P-904.2 Values for Fixtures Not Listed
709.2 Sanitary Drainage, Fixtures Not Listed in Table 709.1
Fixtures not listed in Table 709.1 shall have a drainage fixture unit load based on the outlet size of the fixture in accordance with Table 709.2 ...
Plumbing Code 2018 of Philadelphia > 7 Sanitary Drainage > 709 Fixture Units > 709.2 Fixtures Not Listed in Table 709.1
P3004.1 Sanitary Drainage, DWV System Load
, such as from a pump or similar device, 1.5 fixture units shall be allowed per gpm of flow. For a fixture not listed, use the highest d.f.u. value for a similar ...
2018 Philadelphia Residential Code > 30 Sanitary Drainage > P3004 Determining Drainage Fixture Units > P3004.1 DWV System Load
P-1107.2 Vents and Venting, Venting Not Required
and which does not exceed 10 feet in length shall not require additional venting. No fixtures shall be permitted above the offset, except that one small ...
Philadelphia Plumbing Code > 11 Vents and Venting > P-1107 Venting of Offsets > P-1107.2 Venting Not Required
604.7 Building Services and Systems, Equipment and Fixtures
Electrical equipment and fixtures shall be tested and listed by an approved agency and installed and maintained in accordance with all ...
2018 Philadelphia Fire Code > 6 Building Services and Systems > 604 Electrical Equipment, Wiring and Hazards > 604.7 Equipment and Fixtures